NanoTronix Cable Expert™ (Model No.: CE-1000) is the all-in-one and easy-to-use network qualification unit measuring logical network performance and physical condition of network cables. It allows network engineers to install and maintain efficiently local area networks (LAN) with 10BASE-T and 100BASE-TX based on the Ethernet protocol.
For measuring logical network performance, it provides the round-trip time (RTT) testing to measure network speed under dynamic and static configuration protocol and the IP scanning to show the information on all the terminals connected into the local network. It can also evaluate the capability of link partners such as supported network speed (10BASE-T or 100BASE-TX) and duplexity (half- or full- duplex).

NOFL-500 (Visual fault locator) is an optical instrumentation device that identifies faults along the optical fiber under test (FUT). Emitting visible high-powered laser (red) of over 50 mW into the FUT, it helps the users identify the FUT at opposite position or detect faults through the light emitting from the end of the FUT or fault positions up to 15 km in case of SMF (Single Mode Fiber).
NOFL-500 Visual fault locator's Portable size and easy manipulation makes it suitable for installation and maintenance of optical network.

NanoTronix LAN Cable Tester Plus (Model No.: mTDR-030) is a combination unit that utilizes MTDR(Metallic Time-Domain Reflectometry) technology used in measuring cable distance and TCP/IP protocol analyzer for examining internal conditions of LAN communication lines.
To improve the efficiency on LAN cable management, LAN Cable TesterPlus also has a pairing check function used for pinpointing the ill connection of LAN connectors (open, short, reversed, crossed and splitted) and a tone probing function used for tracing cable in the walls, floors and ceilings.
LAN Cable TesterPlus is ideally suited for work on installation of networks and for ongoing maintenance and service to any type of paired (shielded or twisted) metallic cables such as category 5/6 UTP cables, Telephone lines, Coaxial cables and LAN systems. Its' all-in-one testing capabilities meets the needs of every cable contractors, installers and technicians at lowest cost.
LAN Cable TesterPlus is housed in a rugged ABS enclosure designed to deliver water-resistant performance and provides technicians with the added convenience of being hand-held. It is powered by four AA(NEDA 15A or LR6) batteries, which are stored in a compartment on its back.

The Advanced Waveform TDR(Model No.:mTDR-070) is a high-end TDR instrument designed to meet today's most demanding network cabling problems. Advancing beyond the numeric readout, the Advanced Waveform TDR(Model No.:mTDR-070) displays the actual waveform or "signature" of the cable. Keeping to its traditional ways, the Advanced Waveform TDR(Model No.:mTDR-070) displays the actual waveform or signature of the cable thereby enabling engineers and technicians to pinpoint any impedance reflections along the length of the cable

The LAN Cable Tester (Model No.:mTDR-020) is the ideal instrument for both LAN and cable network management. It combines the best of the LAN Cable Tester (Model No.:mTDR-020)'s cable measurement technologies with additional features that enable technicians to troubleshoot during LAN installation and maintenance.

NanoTronix' Numeric Cable Fault Locator (Model No.:mTDR-010) is a most suitable & low-price instrument in locating a fault, open or short along with metallic cable, which has high-resolution TDC (Time-to-Digital Converter) technology. This cable fault locator is applicable for any cable consisting of at least double insulated metallic elements like a coaxial cable at and a low cost.