BW Sensepoint XCD

The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet
switches without ever needing to open the unit. This enables one-man, nonintrusive operation and reduces routine maintenance time and costs.

Sensepoint XCD ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using easy to replace plug-in sensors, downtime is also reduced and on-going costs are minimized
through the use of poison resistant flammable sensors, poison immune infrared Hydrocarbon sensors and patented Surecell™ toxic sensors and Reflex® sensor health check.

All detectors are supplied pre-configured and include 2 programmable alarm relays, 1 programmable fault relay as well as an industry standard 4-20mA output (sink or source selectable) and Modbus. A tri-color backlit LCD clearly indicates the unit’s status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm.

Features Include:

One-Stop Shop
• Flammable (catalytic or infrared), toxic and oxygen versions available
• New and retrofit applications
• Suitable for indoor or outdoor use
• Stainless steel or aluminium explosion-proof housing options
• IP66 as standard

Proven and Reliable Sensor Technology
• SurecellTM electrochemical sensors
• Poison immune infrared sensors
• Poison resistant catalytic bead sensors
• Long life sensors

Global Approvals
• US and Latin America, European, Canadian and Asian
• Compliant with UL, INMETRO, ATEX, IECEx, CSA, KTL, PA, GB and CCCF standards

Easy to Use
• User friendly and intuitive tri-colour backlit display with digits, bar graph and icons
• Fully configurable via magnetic switches
• Optional remote sensor mounting*
• Selectable sink or source 4-20mA output
• Auto-inhibit during maintenance
• MODBUS communications for remote diagnostics/configuration*

Cost Effective
• Common transmitter platform
• Minimal training required
• Reduced spares
• Non-intrusive, one-man operation
• Plug-in sensor replacement
• MODBUS multi drop option offers cabling savings*

Simple Installation
• Plug-in display module removes to give access to terminal area
• Integral mounting bracket
• 2 x M20 or ¾” NPT cable/conduit entries (certification dependent)
• Removable plug/socket type terminal blocks for ease of wiring
• Sink/source switch to suit preferred wiring topology

Range of Optional Accessories

• Remote sensor mounting kit*
• Remote sensor gassing kit
• Duct mounting kit
• Calibration gas flow housing
• Collecting cone

The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces routine maintenance time and costs
 

 


UL/CSA/INMETRO approved SP XCD Flammable CAT 0-100%LEL (20 to 100%LEL, 10%LEL) with LM25, 3/4” NPT Entry

UL/INMETRO approved SP XCD Flammable Methane (CH4) IR 0-100%LEL (20 to 100%LEL, 10%LEL) with LM25, 3/4” NPT Entry

UL/INMETRO approved SP XCD Flammable Propane (C3H8), Ethylene (C2H4), Butane (C4H10) & Pentane (C5H12); IR 0-100%LEL (20 to 100%LEL, 10%LEL) with LM25, 3/4” NPT Entry

UL/cUL/INMETRO approved SP XCD Carbon Dioxide (CO2) IR 0-2%Vol. with LM25, 3/4” NPT Entry
 
UL/cUL/INMETRO approved SP XCD Oxygen (O2) 25.0%/Vol with LM25, 3/4” NPT Entry

UL/cUL/INMETRO approved SP XCD Hydrogen Sulfide (H2S) 0-50ppm (10.0 to 100.0ppm, 1ppm) with LM25, 3/4” NPT Entry

UL/cUL/INMETRO approved SP XCD Carbon Monoxide (CO) 0-300ppm (100 to 1000ppm, 100ppm) with LM25, 3/4” NPT Entry

UL/cUL/INMETRO approved SP XCD Hydrogen (H2) 0-1000ppm with LM25, 3/4” NPT Entry

UL/cUL/INMETRO approved SP XCD Nitrogen Dioxide (NO2) 0-10ppm (10 to 50ppm, 5ppm) with LM25, 3/4” NPT Entry

Ask about this product