Products

Gas detectors/analysers/recorders

  • Filter

TST0092 535, CO2 measuring instrument with permanently attached probe, batteries and calibration protocol Long-term stable 2 channel infrared sensor Highly accurate, highly efficient Repeated calibration is unnecessary TST0092 535, CO2 measuring instrument with permanently attached probe, batteries and calibration protocol Long-term stable 2 channel infrared sensor Highly accurate, highly efficient Repeated calibration is unnecessary

The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, nonintrusive operation and reduces routine maintenance time and costs. Sensepoint XCD ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using easy to replace plug-in sensors, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors, poison immune infrared Hydrocarbon sensors and patented Surecell™ toxic sensors and Reflex® sensor health check. All detectors are supplied pre-configured and include 2 programmable alarm relays, 1 programmable fault relay as well as an industry standard 4-20mA output (sink or source selectable) and Modbus. A tri-color backlit LCD clearly indicates the unit’s status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm. ...

This showcased formaldehyde tester comes with a portable design. This portable formaldehyde tester features a large digital screen for easy and convenient reading. This high-quality portable formaldehyde tester is easy to use. High quality. Portable design.

Measuring Range: 0~999 ppm (+-5%),0~100%RH, 10~50cFree USB Software, 32000 memories

testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer. Robust and light instrument for daily use 30 seconds sensor zeroing Integrated condensate trap Integrated magnets for easy fixing to burne  

With 3m Sampling pump for confined space/remote testing H2S: 0 – 200 ppm (1 ppm increments) CO: 0 – 1000 ppm (1 ppm increments) O2: 0 – 30.0% vol. (0.1% vol. increments) LEL (combustible): 0 – 100% LEL (1% LEL increments) or 0 – 5.0% v/v methane JKR Approved/Worldwide Acceptance/OSHA Compliance  

1. Detect leaks in automobile exhaust and fuel system. 2. Detect leaks in liquid or gas fired heating systems. 3. Safety checks at propane filling stations. 4. Search for arson residue (detects accelerants). 5. Detect fuel in marine bilges. 6. Check manholes/sewers for safety. 7. Check for cracked heat exchangers. 8. Detect solvent residue.