electronic gas leak detector with flexible measurement probe, mains charger and earphones Optical and audible alarm with bar display for increasing and dangerous gas concentrations Integrated pump Trend display shows maximum leakage Flexible measurement probe for inaccessible places Meas. range10 ppm to 4,0 Vol. % CH4 10 ppm to 1,9 Vol. % C3H8 10 ppm to 4,0 Vol. % H21st alarm limit200 ppm CH4 100 ppm C3H8 200 ppm H22nd alarm limit10.000 ppm CH4 5.000 ppm C3H8 10.000 ppm H2Battery life6 h
Track Gas Leak Detector can detector mixture 5% Hydrogen (H2) + 95% Nitrogen (N) with extremely sensitivity. The unit is built in newly developed heated semi-conductor sensor and microprocessor control to provide reliable digital signal processing. Adjustable leak sensitivity level and 7 LED visual indicators also offer the users the ease and convenience of operations. Features: Microprocessor control with advanced digital signal processing Multi color visual display High-Low leak sensitivity selector Low battery indication Semiconductor gas sensor Detection of Hydrogen 15” (39cm) flexible stainless probe Ambient concentration reset Specifications: Detectable Gases: 5% Hydrogen (H2) + 95% Nitrogen (N) Sensitivity: 5ppm; 2g/year Alarm Method: Buzzer alarm, LED bar Indicator Detection Tube Length: 15 inch (390mm) Warm-Up Time: 45 sec Battery: 1.5V AA x 4 Dimensions: 173 x 66 x 56mm Weight: 400g *The specifications are subjects to change without...
Either Semiconductor or Infrared technologies are applied to this product family. Unlike the conventional semiconductor one, the infrared leak detector not only last longer but provide the contamination model to detect the smallest leak. Both type have 3 adjustable sensitivity levels and LET tip light. They start up with noticeable start-up melody (312/316) and easy recharged with USB power adaptor (312/316). The multiple colors LED are easy for users to identify the leak levels.
The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, nonintrusive operation and reduces routine maintenance time and costs. Sensepoint XCD ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using easy to replace plug-in sensors, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors, poison immune infrared Hydrocarbon sensors and patented Surecell™ toxic sensors and Reflex® sensor health check. All detectors are supplied pre-configured and include 2 programmable alarm relays, 1 programmable fault relay as well as an industry standard 4-20mA output (sink or source selectable) and Modbus. A tri-color backlit LCD clearly indicates the unit’s status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm. ...