You have 0 items in your cart.
Products
By Brands
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
YOKOGAWA 1.0 GHZ DIFFERENTIAL PROBE (PBDH1000) 701924 | The PBDH1000 (701924) is a 25Vp Differential Probe powered by the Yokogawa Probe Interface. This probe can be used only with the Yokogawa DLM2000, DL6000, DLM6000, DL9000, and SB5000 series oscilloscope. | VOLTAGE PROBES |
|
|
|
YOKOGAWA 10 MHZ PASSIVE PROBE 701940 | Passive Probe, 600Vpeak, 6MHz/10MHz, 1:1, 10:1, 1MΩ/10MΩ, 1.5m '600V Non-Isolated' Typically used for non-isolated ScopeCorder module 701255 on the Dl850/DL850V/DL750/DL750P/SL1400/SL1000. | VOLTAGE PROBES |
|
|
|
YOKOGAWA 100 MHZ DIFFERENTIAL PROBE 701921 | Bandwidth: DC to 100 MHz (-3 dB) | VOLTAGE PROBES |
|
|
|
YOKOGAWA 100:1 ISOLATED PROBE 701947 | Passive Probe, 3540Vp-CAT I, 1000Vp-CAT II, 200MHz, 100:1, 100MΩ, 1.5m, 'Isolated Probe' 'Iso-Probe'. For use with 701250, 701251, 701260, 701280, 701281, 720210 isolated-input modules ONLY. For use with DL850 series, DL750/DL750P, SL1400, and SL1000. Not for use with CAT III or CAT IV measurements | VOLTAGE PROBES |
|
|
|
YOKOGAWA 100:1 PROBE 701944 | The 701944 is an oscilloscope passive probe supporting up to 1000Vrms, 400MHz bandwidth, and 100:1 attenuation ratio. The probe length is 1.2 meters, with a 50MΩ input resistance. This probe is well suited for high voltage, higher bandwidth single ended voltage measurements at an affordable cost. It is compatible with Yokogawa oscilloscope models DLM2000, DLM4000, DL/DLM6000, DL9000, SB5000 and DL1700. See also 701945 for the 250MHz bandwidth version of this same probe. | VOLTAGE PROBES |
|
|
|
YOKOGAWA 100:1 PROBE 701945 | Passive Probe, 1000Vrms, 250MHz, 100:1, 50MΩ, 3.0m, 'Mini' with extra-long 3m lead. Compatible with DL1700, DLM2000, DLM4000, DL/DLM6000, DL9000 and SB5000. See also 701944 for 400 MHz version of this same probe. | VOLTAGE PROBES |
|
|
|
YOKOGAWA 1:1 BNC SAFETY ADAPTER LEAD 701901 | 1000 Vrms-CAT II, 1.8 m longSafety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.Applicable for DL750/DL750P, SL1000, SL1400 | OSCILLOSCOPE ACCESSORIES |
|
|
|
YOKOGAWA 2.0 GHZ DIFFERENTIAL PROBE (PBD2000) 701923 | PBD2000 Differential Probe, 5Vp Differential, 7Vp Common-Mode, 2GHz, 10:1, 50kΩ. Fits Yokogawa scope Probe Interface only: DLM2000, DL6000, DLM6000, DL9000, SB5000 | VOLTAGE PROBES |
|
|
|
YOKOGAWA 200 MHZ DIFFERENTIAL PROBE 701922 | The 701922 is a 10:1 Differential Probe rated at 20Vpeak differential voltage input and 60Vpeak Common-Mode input with 200MHz bandwidth (-3dB). This probe is recommended for CAN bus and can be used with virtuallly any oscillscope with an internal 50Ω termination or use the external 50Ω 700976. This probe is powered via a built in pig-tail LEMO lead. This probe can be powered with Yokogawa scope option /P2 or /P4, or an external power supply 700938-3-D or 701934-D. The... | VOLTAGE PROBES |
|
|
|
YOKOGAWA 200 MHZ PASSIVE PROBE 700960 | Passive Probe, 600Vp, 200MHz, 1:1 & 10:1 switcable, 1MΩ/10MΩ, 1.5m,This is the standard passive probe included with a DL1600. | VOLTAGE PROBES |
|
|
|
YOKOGAWA 200 MHZ PASSIVE PROBE 701938 | Passive Probe, 600Vp, 200MHz, 10:1, 10MΩ, 1.5mSupplied standard with DLM2000/DLM4000. | VOLTAGE PROBES |
|
|
|
YOKOGAWA 2100A SERIES SWITCHBOARD METER | RMS rectifier type, Mean rectifier type Suspension type: Taut band suspension type JIS C1102-2007, Class 1.5/2.5 Please specify model, full scale value and unit, cover color when ordering. | ANALOG SWITCHBOARD INSTRUMENTS |
|
|
|
YOKOGAWA 50 OHM DC BLOCK 701975 | This DC block can be used to remove the DC component from an incoming signal. Use this block if you want to remove bias voltage from reaching the PBL5000 probe. | OSCILLOSCOPE ACCESSORIES |
|
|
|
YOKOGAWA 50 Ω TERMINATOR 700976 | Used to connect an oscilloscope having a 1M-ohm input to a probe with a 50-ohm output. | OSCILLOSCOPE ACCESSORIES |
|
|
|
YOKOGAWA 500 MHZ DIFFERENTIAL PROBE 701920 | Differential Probe, 12Vp Differential, 30Vp Common-Mode, 500MHz, 10:1, 100kΩ w/ built-in LEMO lead pig-tail Works with all scopes with BNC Input w/ 50Ω Input Termination. Requires 50Ω scope or use 700976 50Ω terminator. Requires /P2/P4 LEMO option or external probe power supply. | VOLTAGE PROBES |
|
|
|
YOKOGAWA 500 MHZ PASSIVE PROBE 701939 | Passive Probe, 600Vp, 500MHz, 10:1, 10MΩ, 1.3mSupplied standard with DLM2000/DLM4000. | VOLTAGE PROBES |
|
|
|
YOKOGAWA 900 MHZ FET PROBE 700939 | Active Probe, 10Vp, 900MHz, 10:1, 2.5MΩ / 1.8pF, 1.5m, FET Probe w/ LEMO power pig-tail See Also: 700938-3-D Active Probe Power Supply w/ 2 LEMO output jacks701934-D Active Probe Power Supply w/ 4 LEMO output jacksPlease use a 50Ω input oscillosope scope or use 700976 pass-thru terminator. | VOLTAGE PROBES |
|
|
| YOKOGAWA 96001/751552 CURRENT CLAMP-ON PROBE | Current clamp-on probe accessories for digital power meters, power analyzers, and digital multimeters AC 400 Arms (600 A Peak) / AC 1000 Arms (1400 A Peak) | DIGITAL POWER ANALYZER ACCESSORIES |
|
||
|
YOKOGAWA A1002JC NDIS CONNECTOR | An NDIS connector for direct connection to a strain module. | OSCILLOSCOPE ACCESSORIES |
|
|
|
YOKOGAWA A1105JC DC POWER SUPPLY CONNECTOR | For the DC power supply model (-DC). | OSCILLOSCOPE ACCESSORIES |
|