|
GW INSTEK GBS-1000 Series
|
|
Features
*200MHz/100MHz/70MHz Bandwidth Range*1GSa/s Real-time Sampling Rate and 25k Points Memory Depth*25GSa/s Equivalent Time Sampling Rate*2mV /div to 5V/div of Vertical Range*1ns/div to 10s/div of Time Base Range*5.7 inch TFT LCD Display*Data Log*USB Host port:flash drive storage and Pictbridge-compatible printer*USB Device port:PC remote control*27 Automatic Measurement Functions offer Direct Measurement Readings*FFT and FFTrms Computing Provides the Frequency Domain Analysis |
Digital Oscilloscopes
|
|
|
GW INSTEK GDS-300 / 200 Series
|
|
Features
* 200/100/70MHz Bandwidth Selections, Two Input Channels* 1GSa/s Maximum Sample Rate* Maximum 5M Memory Depth Per Channel* 7” 800 x 480 Full Touch Panel Capacitive LCD Multi-Point Control, Landscape and Portrait Display* Built-In 50,000 Counts DMM* 30,000 Consecutive Waveform Records Logging Function, Replay Measurement Results Any Time* Temperature Measurement and Logging Function* Built-In Engineering Calculator, SMD Resistance Coding, Color Coding Info, and Attenuator Calculation... |
Digital Oscilloscopes
|
|
|
GW INSTEK GDS-122
|
|
Features
* 20MHz Bandwidth * 100MS/s Real-Time Sampling Rate * True RMS Multimeter: Volt, AMp, Ohm, Continuity, Diode * Dual Independent Floating Isolated Channels* Trigger Mode: Free Run, Single Shot, Edge, Video * USB Interface * 6 Hour Capacity Li-ion Rechargeable Battery * 3.8" Color LCD, Resolution: 320 x 240 * Light Weight: 690g |
Digital Oscilloscopes
|
|
|
GW INSTEK GRS-6000A Series
|
|
Features
* 50M/30MHz with 100MSa/s and 2 Channles * Equivalent Time Sampling of 500MSa/s max. * Acquire Mode : Peak Detect, Envelop, Persistence * Pre-Trigger Function 0 ~ 10 div * ROLL Mode to 100s/div * Waveform SAVE/RECALL 10 sets (REF0~REF9) * Max. Sweep Rate 10ns/div * Panel Setting SAVE/RECALL 10 sets (M0~M9) * RS-232C Interface |
Real Time / Digital Storage Oscilloscope
|
|
|
GW INSTEK GOS-6100 Series
|
|
Features
* 100MHz Bandwidth, Dual Channel, Delayed Sweep * Built-In 6 digits Universal Counter (GOS-6103C)* 10 Sets Memory for Front Panel Setting Save & Recall (GOS-6103/GOS-6103C)* Time Base Auto-range (GOS-6103/GOS-6103C)* Cursor Readout with 7 Measurements * Panel Setup Lock of Digital-Control Functions * Buzzer Alarm * LED Indicators * TV Synchronization |
Analog Oscilloscopes
|
|
|
GW INSTEK GOS-6000 Series
|
|
Features
* 2 Channels, 4 Traces:* DC~50M/30MHz Bandwidth* 1mV/div ~ 20V/div * CRT Readout * Cursor Measurement, 6 Digit Frequency Counter, 10 sets Memory for * Front Panel Setting Save & Recall* ALT, MAG Function (x 5, x 10, x 20) * Vertical Mode Triggering * TV Synchronization * Buzzer Alarm & LED Indicators |
Analog Oscilloscopes
|
|
|
GW INSTEK GOS-653G/652G
|
|
Features:
* 50MHz Bandwidth, Dual Channel * Delayed Sweep (GOS-653G)* Built-In Delay Line (GOS-653G) * TV Synchronization * CH1 Output * Z-Axis Modulation Input * ALT Triggering Function * Hold Off Function * Trigger Level Lock Function |
Analog Oscilloscopes
|
|
|
GW Instek GOS-635G/622G
|
|
Features
* 35MHz Bandwidth, Dual Channel (GOS-635G)* 20MHz Bandwidth, Dual Channel (GOS-622G)* High Sensitivity 1mV/div * TV Synchronization * Z-Axis Input * ALT Triggering Function * Hold Off Function (GOS-635G,GOS-622G) * CH1 Output |
Analog Oscilloscopes
|
|
|
GW INSTEK GOS-630FC
|
|
Features
* 1mV/div High Vertical Sensitivity * Internal 5 Digits Real-Time Frequency Counter * LCD Readout Display for Vertical/ Horizontal/Frequency Measurement * Auto Time-Base * Buzzer Alarm * TV(TV-V, TV-H) Trigger Modes * XY Mode * Z-Axis Input and External Trigger Input |
Analog Oscilloscopes
|
|
|
GW INSTEK GOS-630/GOS-620
|
|
Features
* 30/20MHz Bandwidth, Dual Channel * High Sensitivity 1mV/div * TV Synchronization * Z-Axis Input * ALT Triggering Function * CH1 Output |
Analog Oscilloscopes
|
|
|
GW INSTEK GLA-1000 Series
|
|
Features
* 32/16 Input Channel * Time Analysis : Up to 200MHz Internal Sampling Rate * State Analysis : Up to 100MHz External Input Clock * Memory Depth : Up to 2Mbits/1Mbits (Half/Full Channels) * Enable Qualifier : High/Low Level Enable and Enable Delay Function * Signal Analyzer : I2C, RS-232C Protocol Analyzer and Signal Statistics * File Export : Signal Data, Operation Setting and Display Image * USB 2.0 Supported(1.1 Compatible) |
Logic Analyzers
|
|
|
GW INSTEK GDB-03
|
|
Features
* Application for GDS-3000 demo and oscilloscope training* 5Vdc Power Input (Support USB Power, interface Type B) |
Oscilloscope & Training Kit
|
|
|
GW INSTEK GDB-02
|
|
Features
* Application for GDS-Series and GLA-Series* 5Vdc Power Input (Support USB Power, interface Type B) |
Oscilloscope & Training Kit
|
|
|
GAS DNA DA-50 Series SMART Gas Detector/Transmitter(4~20mA) with built-in LCD
|
|
DA-50 detects various combustible & toxic gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. DA-50 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more... |
Gas Detector
|
|
|
GAS DNA DA-100 Series (explosion proof) SMART Gas Detector/Transmitter(4~20mA) & Explosion Proof
|
|
DA-100 detects combustible or toxic gas leakage and transmits standard electric current output signal 4 ~ 20mA to be connected with various controllers such as gas leakage warning device (GMS-1000/1500/2000), PLC, DDC, or MMR for individual or integrated gas monitoring system(controller). |
Gas Detector
|
|
|
GAS DNA DA-500 Series (explosion proof) SMART Gas Detector/Transmitter(4~20mA) with built-in LCD & explosion proof
|
|
DA-500 detects various combustible & toxic gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. DA-500 converts digital signal into the 4-20mA standard current output signal which can be transmitted to various devices such as PLC, DDC, or recorder to build comprehensive gas monitoring system. Also, DA-500 provides RS-485 communication signal and alarm relay contact. DC 4-20mA standard... |
Gas Detector
|
|
|
GAS DNA DA-750 Series SMART Gas Detector/Transmitter(4~20mA) with built-in LCD – Suction Type
|
|
DA-750 detects leakage of various toxic or combustible gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. Built-in micro pump suctions gas continuously which is effective gas sampling especially for closed area. DA-750 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on to... |
Gas Detector
|
|
|
GAS DNA DA-800 Series (explosion proof) SMART Gas Detector/Transmitter(4~20mA)with built-in LCD & explosion proof, Suction Type
|
|
DA-800 detects various combustible & toxic gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. Built-in micro pump for gas sampling enables effective gas detection especially for the environment where diffusion type gas detectors cannot be used. DA-800 converts digital signal into the 4-20mA standard current output signal which can be transmitted to various devices such as PLC, DDC, or... |
Gas Detector
|
|
|
GAS DNA CO2 Detector CD-30M/30I
|
|
CD-30M/30I are designed for air conditioning system being installed on air conditioning duct system. With built-in transmitter, CD-30M/30I can detect CO2 gas density using NDIR (Non Dispersive Infrared) and convert the measured density signal into linear current or voltage signal to be transmitted to external monitoring unit or controlling unit such as PLC or DDC. |
Gas Detector
|
|
|
GAS DNA CO Detector CD-10 CO gas detection & alarm unit specialized for underground parking area
|
|
CD-10, the artificial intelligent CO gas alarm unit specialized for underground parking area, using electro-chemical sensor, detects CO gas density and provides the measured density signal to both 2 step relay output and standard current signal output (DC 4-20mA) to be connected to various external devices to carry out underground parking area atmosphere environmental monitoring. |
Gas Detector
|
|