|
DKK-TOA FBM-160(Field Installation Type)
|
|
Simplified Fluoride Ion Monitor FBM-160(Field Installation Type)
Outdoor field installation model
Continuous monitoring of fluoride ion concentration by an ion electrode sensor with the alarm function (non-ionized fluoride is not detectable)
Water-jet cleaning function available
Meas. range
0 - 99.9/999/9990 mg/L
|
Simplified Fluoride Ion Monitor
|
|
|
DKK-TOA FBM-100A(Panel Type)
|
|
Simplified Fluoride Ion Monitor FBM-100A(Panel Type)
Compact DIN 96 size unit
Quick and continuous detection of free fluoride ion concentration
Monitors the effluent treatment processes and final effluent from semiconductor factories, etc.
Meas. range
0 - 99.9/999/9990 mg/L
|
Simplified Fluoride Ion Monitor
|
|
|
DKK-TOA CNMS-4
|
|
Cyanide Ion Monitor CNMS-4
Simple measurement with just an ion electrode
Enables continuous cyanide ion measurements in discharged industrial wastewater and river
Automatic cleaning and calibration function ensures stable measurement
Easy-to-use touch panel
Built-in 2L or external 10L lockable waste fluid tank available
Meas. range
0.03 - 2/0.05 - 5 mg/L |
Simplified Cyanide Ion Analyzer
|
|
|
DKK-TOA CNBM-160(Field Installation Type)
|
|
Simplified Cyanide Ion Monitor CNBM-160(Field Installation Type)
Outdoor field installation model
One-touch calibration done with standard solution
Auto-detection of electrode deterioration
Automatic detection of electrode error during the measurement
Meas. range
0.00 - 9.99 mg/L
|
Simplified Cyanide Ion Analyzer
|
|
|
DKK-TOA CNBM-100A(Panel Type)
|
|
Simplified Cyanide Ion Monitor CNBM-100A(Panel Type)
Compact DIN 96 size unit
One-touch calibration done with standard solution
Auto-detection of electrode deterioration
Automatic detection of electrode error during the measurement
Meas. range
0.00 - 9.99 mg/L |
Simplified Cyanide Ion Analyzer
|
|
|
DKK-TOA COD-60A
|
|
The integrated oxidation & titration design and the sequence control function simplified operations
Smaller waste solution (lower than 10mL per measurement)
Real time display of sequence and titration curve
Meas. range
0 - 20.0/40.0/100/200/400/1000 mg/L |
Simplified COD Meter
|
|
|
DKK-TOA FS-3
|
|
The cleaning process done by two filters alternately allows for continuous supply of sample
Filtration rate
1 - 6 L/min (Varies from sample turbidity) |
Sand Filter
|
|
|
DKK-TOA CLF-1600
|
|
Measures residual chlorine (total or free) happened in the water chlorination process
Continuously measurement with polarographic method
1/5 reagent requirement of existing models
RS-485 equipped as standard specification; compatible with Modbus communication system
Freely mountable on walls, racks, etc. for the compact lightweight design
Meas. range
0 - 0.5/1.0 to 0 - 5/10 mg/L (ppm) (2-range)
|
Residual Chlorine Analyzer
|
|
|
DKK- TOA CLF-1610
|
|
Measures free residual chlorine of clean water continuously with the reagentless polarographic method
RS-485 equipped as standard specification; compatible with Modbus communication system
Freely mountable on walls, racks, etc. for the compact lightweight design
Meas. range
0 - 1/2, 0 - 1/3, 0 - 2/3 mg/L (ppm) (2-range)
|
Reagentless Free Chlorine Analyzer
|
|
|
DKK-TOA CD-36D/38D
|
|
Measures free residual chlorine of chlorinated samples from purification/food processing/semiconductor plants and pool without reagent
Continuous measurement by polarographic method
Meas. range
CD-36D: 0 - 2 mg/L (ppm) CD-38D: 0 - 100 mg/L (ppm)
|
Reagentless Free Chlorine Analyzer
|
|
|
DKK-TOA CLF-120
|
|
Reagentless Residual Chlorine Analyzer CLF-120
Measures total residual chlorine of drainage water without reagent
Continuous measurement by polarographic method
Meas. range
0 - 0.5/1.0, 0 - 1/2, 0 - 2/3 mg/L (ppm)
|
Reagentless Free Chlorine Analyzer
|
|
|
DKK-TOA CLBM-50
|
|
Residual Chlorine Analyzer CLBM-50
Ultracompact DIN 48 size
Reagenless model
Auto-cleaning by polishing beads and micro-vibrating electrode
Power supply: 100 - 230VAC
Low power consumption of 5VA
Meas. range
0 - 3 mg/L
|
Reagentless Free Chlorine Analyzer
|
|
|
DKK-TOA HSCA-2000
|
|
Designed for oil refinery
Enables low-concentration measurement ranged 0 - 10 ppm
Adopts credible energy-dispersive X-ray spectroscopy method
Simple composition (no motor and burner)
Easy-to-use touch panel
Explosion-proof TIIS ExpdⅡBT4 certified
Meas. range
0 - 10 ppm 0 - 500 ppm
|
Process Sulfur Content Analyzer
|
|
|
DKK-TOA SCA-200
|
|
Designed for oil refinery
Batch and continuous measurement of sulfur concentration of petroleum products like light and heavy oil
Best suited for product and quality control of petroleum products
Eliminates RI regulation process and enhances safety by using the compact and X-ray tube
Meas. range
0~0.1 wt% 0~5 wt%
|
Process Sulfur Content Analyzer
|
|
|
DKK-TOA COL-330
|
|
Measures color of oil products and coloration out of mixed heavy oil from heat converters, etc.
Compact onboard spectroscope allows for a broad range of wavelength measurement
Saybolt color, ASTM color, APHA color measurable
Explosion-proof TIIS ExpdⅡBT4 certified
|
Process Colorimeter
|
|
|
DKK-TOA PPA
|
|
Designed for oil refinery
Continuous measurement of pour point which is used as indication of light oil and intermediate fraction of fuel oil A
Best suited for management of plant and product control
Explosion-proof TIIS d2G4 certified
Meas. range
-30 - +20 degrees C
|
Pour Point Analyzer
|
|
|
DKK-TOA TB-31
|
|
● Immersion type of sensor which is convenient for turbidity measurement in fields ● Reliability of low-concentration measurement has been improved (repeatability within the range of ±0.5NTU) ● Power-saving design; rechargeable battery adaptable ● Waterproof design (IP67: 1m depth, up to 30mins)
Meas. range
0.0 - 80.0 NTU (mg/L) 0 - 800 NTU (mg/L) Switch modes: auto/manual
|
Portable Turbidity Meter
|
|
|
DKK-TOA TNP-10
|
|
Simultaneous measurement of up to 11 items including total nitrogen and phosphorus
Blank calibration function
Data storage up to 1000 data points
Built-in printer
Meas. items:
TN, TP, COD PO4-P, PO4 NO3-N, NO3 NO2-N, NO2 NH4-N, NH4
|
Portable Total Nitrogen/Phosphorus Meter
|
|
|
DKK-TOA OZ-20 / 30
|
|
●Portable, easy calibration, continuous measurement capability ●Two types available: OZ-20(for liquid phase) and OZ-30(for gas phase) ●Easy measurement, simply by placing electrode in the atmosphere ●AC/DC 2-way power source ●Optional flow cell for dissolved ozone
Meas. range
1.5 - 19.99mg/L(for liquid), 1 - 100g/m3 (for air)
|
Portable Ozone Meter
|
|
|
DKK-TOA MDM-25A(Including a PVC Sensor)
|
|
Concentration of acid and alkali measurable
High concentration range measurable by electromagnetic method
Analog output enables easy continuous measurement
Switchable concentration and conductivity rate
Easy maintenance requires no daily calibration
Meas. range (conductivity rate)
0 - 200 S/m
|
Portable Electromagnetic Meter
|
|