|
DKK-TOA SAT-500
|
|
Salinity Analyzer SAT-500
Simple operation-just inject the sample into electrolyte in dedicated beaker
Rapid measurement-approx. 25 seconds from measurement start to data output for a standard 1% NaCl standard solution
Capable of stable measurements without effect from artificial colorings
Meas. range
0.0000 - 49.99% |
Food-Related Analyzers
|
|
|
DKK-TOA RM-30P
|
|
Handheld ORP Meter RM-30P
Dedicated model for ORP measurement
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
Meas. range
0 - ±2000 mV 0 - 100.0 degrees C |
Handheld pH/ORP Meter
|
|
|
DKK-TOA RHC-7C / RHC-7EC
|
|
Immersion Type Detector with Chemical Cleaner RHC-7C / RHC-7EC
Immersion type electrode holder combined with chemical cleaning system
By spraying mixed air&cleaning agents onto the electrode tip it dissolves fouling away
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA RC-37P
|
|
● Measures diluted sodium hypochloric acid concentration without reagent ●Polishing beads cleaning method allows for stable measurement ●Waterproof design (IP67: 1m depth, up to 30mins)
Meas. range
20 - 300mg/L 5 - 40℃
|
Handheld Hypochlorite Concentration Meter
|
|
|
DKK-TOA RC-31P
|
|
Polarographic method enables easy and reagentless measurement of residual chlorine in tap water, pool, etc. in a low running cost
Supported two measuring methods; throw-in style and water intake style
Waterproof design (IP67: 1m depth, up to 30mins)
Meas. range
0 - 2.00 mg/L 0 - 45℃
|
Handheld Residual Chlorine Meter
|
|
|
DKK-TOA PSS/ASS‐304B(KCl replenish-free) / PSS/ASS‐314B(KCl refillable)
|
|
Exchangeable Tip ORP Electrode PSS/ASS‐304B(KCl replenish-free) / PSS/ASS‐314B(KCl refillable)
asy-to-replace electrode tip and reference electrode junction tip
Platinum electrodes (PSS) and gold electrodes (ASS) available
KCl non-refillable type is ideal for wastewater treatment; KCl refillable type for processes
Selection of electrode holder: immersion type, drop-in type and flow-through type
Meas. range
ORP: -2000 - +2000 mV |
Exchangeable Tip pH Electrode
|
|
|
DKK-TOA PPA
|
|
Designed for oil refinery
Continuous measurement of pour point which is used as indication of light oil and intermediate fraction of fuel oil A
Best suited for management of plant and product control
Explosion-proof TIIS d2G4 certified
Meas. range
-30 - +20 degrees C
|
Pour Point Analyzer
|
|
|
DKK-TOA PHC-7D
|
|
Immersion Type Sensor with Pulse Air Jet Cleaner PHC-7D
Immersion type pH/ORP electrode holder combined with pulse air jet cleaner
Cleaning by high-speed water stream created by the rapid expansion of pulse-jetted compressed air in the sample water
High cleaning effect due to air bubbles present in the water stream randomly hitting the electrode
No consumables required, such as reagents, brushes
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA PAC‐R7
|
|
pH Meter with Chemical Cleaner PAC‐R7
Easy installation as equipments are previously set on the hold stand
Designed for long-term, continuous and highly reliable pH measurement in wastewater treatment facilities
Including mounting brackets
Meas. range
pH: -1 - 15 -5 - 100℃
|
pH Meter with Auto-Calibration/Chemical Cleaner
|
|
|
DKK-TOA OZ-21P
|
|
Simple, reagentless measurement of concentration of ozone stream water produced by ozone water generator
Waterproof design (IP67: 1m depth, up to 30mins)
Polishing beads cleaning method allows for stable measurement
External printer connectable
Meas. range
0 - 2.00 mg/L 5 - 40℃
|
Portable Dissolved Ozone Meter
|
|
|
DKK-TOA OZ-20 / 30
|
|
●Portable, easy calibration, continuous measurement capability ●Two types available: OZ-20(for liquid phase) and OZ-30(for gas phase) ●Easy measurement, simply by placing electrode in the atmosphere ●AC/DC 2-way power source ●Optional flow cell for dissolved ozone
Meas. range
1.5 - 19.99mg/L(for liquid), 1 - 100g/m3 (for air)
|
Portable Ozone Meter
|
|
|
DKK-TOA OPM-1630
|
|
The monitor measures organic pollutant concentration of sample by detecting the absorbance of ultra violet ray (254nm)
No cell window and free from fouling for the contact-free measuring method
With energy-saving lamp it reduces electricity cost significantly
Meas. range
Absorbance : 0 - 2.5 Abs
|
Organic Pollution Monitor (UV Instrument)
|
|
|
DKK-TOA OPM-1610
|
|
The monitor measures organic pollutant concentration of sample by detecting the absorbance of ultra violet ray(254nm)
Stable measurement realized with the UV absorptiomatric method
With energy-saving lamp it reduces electricity cost significantly
Meas. range
Absorbance: 0 - 2.5 Abs |
Organic Pollution Monitor (UV Instrument)
|
|
|
DKK-TOA OF-1600
|
|
Oil film is detected by measuring differences of the amount of LED reflectance of oil and water
Small and lightweight design
Contact-free and easy maintenance
Detectable range
About 0.5 m
|
Oil Film Detector
|
|
|
DKK-TOA ODM-100A (2-wire) / ODM-110A (4-wire)
|
|
Industrial Low-Concentration DO Transmitter ODM-100A (2-wire) / ODM-110A (4-wire)
Easy-to-use low-concentration DO analyzer for field installation in a compact and rigid aluminum case
Simplified calibration procedure; auto detection of electrode deterioration
Alterable output range
Automated self-diagnosis of fault (burn-out output)
Meas. range
Minimum: 0 - 20 μg/L Maximum: 0 - 2000 μg/L
|
Transmitter for Industrial Low-Concentration DO Analyzer
|
|
|
DKK-TOA ODL-1610A
|
|
Oil Film Detector (Long-Distance Model) ODL-1610A
Enables oil film detection even if the surface of sample is 10m away from the detecting cell
Ideal for difficult conditions such as turbulent water and places where is difficult to setup near-water detectors
Contact-free and easy maintenance
Detectable range
0.3 - 10 m
|
Oil Film Detector
|
|
|
DKK-TOA ODL-1600
|
|
Oil film is detected by measuring differences of the amount of laser reflectance of oil and water
With improvements on light source scanning and signal processing, influences occurred in broad water surfaces such as fluctuation, waviness and suspended solids have been reduced effectively
Contact-free and easy maintenance
Detectable range
0.3 - 3 m
|
Oil Film Detector
|
|
|
DKK-TOA OC-711 / OC-950
|
|
Immersion/Drop-In Type DO Holder OC-711 / OC-950
Lightweight PVC holder; length of immersion type holder: 0.3 - 3.5 m, length of stainless steel protection pipe for drop-in type holder: 2 - 6 m
Electrode: polarograph type 7533L (for standard use) or 7536L (for human waste)
|
Immersion/Drop-in Type DO Holder/Detector with Water Jet Cleaner
|
|
|
DKK-TOA OC-64
|
|
Low-Concentration DO Detector for Pure Water OC-64
Suitable for low-concentration DO measurement (pure water in semiconductor factories, boiler water in power plants)
Micro-flow (100mL/min) with special flow cell
Electrode: polarograph type 7561L (Ag electrode) or 7563L (Au electrode)
Lead wire: ELW-32
|
Transmitter for Industrial Low-Concentration DO Analyzer
|
|
|
DKK-TOA OBM-300 (4-wire)
|
|
Low-Concentration DO Transmitter OBM-300 (4-wire)
Multi-functional low-concentration DO analyzer for field installation in a compact diecast aluminum case
3 ranges (automatically switched), 2-point regulated output
Alterable output range
One-touch calibration and various self-diagnostic functions
Meas. range
Minimum : 0 - 20 μg/L Maximum: 0 - 999.9 μg/L
|
Transmitter for Industrial Low-Concentration DO Analyzer
|
|