|
DKK-TOA HBM-165H(2-wire)
|
|
pH / ORP Transmitter with HART Interface HBM-165H(2-wire)
HART communication protocol interface with a 2-wire, 24 VDC circuit
Available for both pH and ORP measurements
Diecast aluminum enclosure, digital display and a wide range of other useful features
One-touch auto calibration
Self-diagnostic function
Meas. range
-1.00 - 15.00 ORP -2000 - 2000 mV
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HBM-160/HBM-162(4-wire)
|
|
Industrial pH/ORP Transmitter HBM-160/HBM-162(4-wire)
Multi-function pH/ORP analyzer for field installation in a compact aluminum diecast enclosure
One-touch calibration and various self-diagnostic functions
2-point contact signal and 2-channel output including temperature (RS-232 optional)
Power supply: AC90~264V, 50/60Hz
Meas. range
pH meter (HBM-160) : pH -1 - 15 ORP meter (HBM-162) : ORP -2000 - +2000mV
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HBM-100A / HBM-102A
|
|
Compact DIN 96 size design
Auto-detection of electrode deterioration
Automated self-diagnosis of fault (burn-out output)
Alterable alarm contact signal (4-point)
2-channel output (RS-232 optional)
Meas. range:
HBM-100A: pH; -1 - 15 HBM-102A: ORP; -2000 - +2000 mV |
Panel Mount pH/ORP Analyaer
|
|
|
DKK-TOA GUX-313E
|
|
Ozone Analyzer GUX-313E
US EPA Approval
Continuous measurement of O3 concentration by using UV photometry method
Easy-to-use touch panel
Meas. range
0 - 0.1, 0 - 0.2, 0 - 0.5, 0 - 1.0 ppm
|
Ozone Analyzer
|
|
|
DKK-TOA GSS‐304B(KCl Replenish-Free) / GSS‐314B(KCl Refillable)
|
|
Easy-to-replace electrode tip and reference electrode junction tip
Alkali-resistant glass tips and hydrofluoric-acid-resistant glass tips available
KCl non-refillable type for wastewater treatment; KCl refillable type for processes
Selection of electrode holder: immersion type, drop-in type and flow-through type
Meas. range
pH: 0 - 14
|
Exchangeable Tip pH Electrode
|
|
|
DKK-TOA GNC-224-1
|
|
Flue Gas Hydrogen Chloride Analyzer GNC-224-1
Continuous measurement of flue gas hydrogen chloride concentration produced in incineration plants by ion electrode method
Small size chloride ion electrode and auto-cleaning function equipped
Easy installation and maintenance attained with front panel operation
Meas. Range
0 - (50 - 2000) ppm 0 - (10 - 50) ppm (optional)
|
Flue Gas Hydrogen Chloride Analyzer
|
|
|
DKK-TOA GLN-314E
|
|
Nitrogen Oxides Analyzer GLN-314E
US EPA Approval
Chemical luminescence method
Alternating measurement of nitric monoxide (NO) and nitrogen oxides (NOx) ensures stable and continuous measurement of minute amounts of nitrogen oxides in the air
Easy-to-use touch panel
Meas. range
0 - 0.1, 0 - 0.2, 0 - 0.5, 0 - 1.0, 0 - 2.0 ppm
|
Nitrogen Oxides Analyzer
|
|
|
DKK-TOA GFS-312E
|
|
Sulfur Dioxide Analyzer GFS-312E
US EPA Approval
Continuous measurement of SO2 by using Ultraviolet fluorescence method
Improved optical system reduces the impact from interfering substances
Easy-to-use touch panel
Meas. range
0 - 0.05, 0 - 0.1, 0 - 0.2, 0 - 0.5, 0 - 1.0 ppm
|
Sulfur Dioxide Analyzer
|
|
|
DKK-TOA GFC-311E
|
|
Carbon Monoxide Analyzer GFC-311E
US EPA Approval
Gas filter correlation method (IR method)
High sensitivity measurement enabled with multi-reflection cell
Easy-to-use touch panel
Meas. range
0 - 5, 0 - 10, 0 - 20, 0 - 50, 0 - 100 ppm
|
Carbon Monoxide Analyzer
|
|
|
DKK-TOA GCO-200
|
|
Flue Gas CO/O2 Analyzer GCO-200
CO/O2 analyzer with an electric electrolysis CO sensor and a galvanic battery adapted O2 sensor
Ease of maintenance, cost reduction attainable with simple constructed unit
Meas. range
CO: 0 - 200 to 2000 ppm (setting available at 100 ppm intervals)(assignable) O2: 0 - 25%
|
Flue Gas CO/O2 Analyzer
|
|
|
DKK-TOA FS-3
|
|
The cleaning process done by two filters alternately allows for continuous supply of sample
Filtration rate
1 - 6 L/min (Varies from sample turbidity) |
Sand Filter
|
|
|
DKK-TOA FPM-377
|
|
PM2.5 Monitor FPM-377
Environment Ministry (JAPAN) Approval
Beta ray attenuation method (mass concentration)
Heater type dehumidifier
VSC cyclone (USEPA approval)
Outdoor type and indoor type available
Meas. range
0 - 500, 0 - 1000, 0 - 5000 μg/m3
|
Particulate Monitor
|
|
|
DKK-TOA FPM-222
|
|
US EPA Approval
Beta ray attenuation method (mass concentration)
Small and semi-permanent semiconductor detector is used to detect the Beta ray
Easy calibration with the calibration film
Meas. range
0 - 1000, 0 - 5000 μg/m3 (0 - 1, 0 - 5 mg/m3)
|
Particulate Monitor
|
|
|
DKK-TOA FPA
|
|
Designed for oil refinery
Batch continuous analysis of flash point of petroleum products such as light gas oil, kerosene and gasoline
Best suited for management of plant and product control
Explosion-proof TIIS d2G4 certified
Meas. range
0 - 100 degrees C
|
Flash Point Analyzer
|
|
|
DKK-TOA FMS-4
|
|
Fluoride Ion Monitor FMS-4
Simple measurement with just an ion electrode
Enables continuous fluoride ion measurement of discharged industrial wastewater
By adding ionic strength adjustment solution part of nonionic fluoride is measurable
Automatic cleaning and calibration function ensures stable measurement
Easy-to-use touch panel
Meas. range
0.1 - 10/0.2 - 20/1 - 100/10 - 1000 mg/L |
Simplified Fluoride Ion Monitor
|
|
|
DKK-TOA FBM-160(Field Installation Type)
|
|
Simplified Fluoride Ion Monitor FBM-160(Field Installation Type)
Outdoor field installation model
Continuous monitoring of fluoride ion concentration by an ion electrode sensor with the alarm function (non-ionized fluoride is not detectable)
Water-jet cleaning function available
Meas. range
0 - 99.9/999/9990 mg/L
|
Simplified Fluoride Ion Monitor
|
|
|
DKK-TOA FBM-100A(Panel Type)
|
|
Simplified Fluoride Ion Monitor FBM-100A(Panel Type)
Compact DIN 96 size unit
Quick and continuous detection of free fluoride ion concentration
Monitors the effluent treatment processes and final effluent from semiconductor factories, etc.
Meas. range
0 - 99.9/999/9990 mg/L
|
Simplified Fluoride Ion Monitor
|
|
|
DKK-TOA EMNA-10
|
|
Continuous measurement of Na+ ion concentration of boiler water at ppb level
Auto self-detection of degradation of ion-exchange system
Meas. range
0 - 0.1/1 - 100/10 - 1000 ppb (manual swtiching)
|
Sodium Ion Monitor
|
|
|
DKK-TOA ELP-005/006/007 ELP-045/046/047/048
|
|
Suitable for bio-process tanks (fermentation tanks). KCl non-refillable and leadless type. Steam sterilizable, strong glass membrane, lead-free safe design
Two types available: Liquid junctions of both pressurized gel type products (ELP-005/006/007) and double junction type products (ELP-045/046/047/048)
Various electrode lengths available according to various tank sizes
Meas. range
pH: 0 - 14
|
pH Sensor for Bio-Process Applications
|
|
|
DKK-TOA DVP-03
|
|
Designed for oil refinery
Measures vapor pressure of petroleum products like gasoline
Vapor pressure is measured by measuring static pressure of the sample that is jetting out from the nozzle at the constant temperature
Measurement result attained via Reid method for vapor pressure
Meas. range
0.01 - 1 MPa abs 0 - 0.15 MPa abs
|
Vapor Pressure Analyzer
|
|