Kyoritsu

  • Filter
  Name SKU Description Category
Kyoritsu 6011A Complies with IEC 61557 • Designed to IP 54 Rating • Live circuit and wiring connection check LED's • Triple ranges insulation tests at 250, 500 and 1000V • Triple range loop and PSC tests 15mA test current at 200Ω/2000Ω range(No RCD Trip) • Phase angle selection on RCD ranges • Polarity switch for continuity tests • Auto-null facility for continuity tests • Earth probe for loop impedance testing on extraneous... Multi Function Testers
Kyoritsu 6018 Designed to meet IEC 61010-1 CAT.III 600V • Test leads with remote control switch.(For insulation&Simplified Earth Test) • Back light function. • Color coded scales and range switch position for easy reading. • Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance. • Can be hung around the neck for both hand’s operation. Multi Function Testers
Kyoritsu 6050 (LOOP+RCD) Kew Combitester provides the ultimate in Microprocessor technology offering Loop and RCD tests with a comprehensive memory and downloading test results. • LOOP Impedance 200/2000Ω range measurement is carried out using a test current of 15mA. This current will not trip RCD’s rated at 30mA or greater. • High resolution for low Loop Impedance (resolution of 0.01Ω) on 20Ω range. • Direct reading of Prospective Short Circuit Current (PSC) and earth fault... Combi Tester
Kyoritsu 6201A The KEW 6201A is a portable appliance tester, performing four functions to ensure the Safety of ClassI and ClassII appliances. And also can measure the mains voltage. Readings are displayed on a large liquid crystal display (LCD) below which are four LEDs which unambiguously display a pass or fail indication for threshold values dictated by AS/NZS 3760. Portable Appliance Testers
Kyoritsu 6202 The Model 6202 is a hand-held portable appliance tester, performing four functions to ensure the Safety of Class I, Class II and Class III 230V appliances. And also can measure the mains voltage.Readings are displayed on a large liquid crystal display (LCD) below which are eight LEDs which unambiguously display a pass or fail indication for threshold values dictated by DIN VDE 0701/0702 Portable Appliance Testers
Kyoritsu 6305 Comprehensive real-time monitoring, recording and analysis of single and 3-phase systems • Voltage, Current, Power Factor and Frequency measurements • Power analysis (Active, Apparent and Reactive power) • Energy analysis (Active, Apparent and Reactive power) • Active power accuracy: ±0.3%rdg±0.2%f.s. • Automatic wiring check function to prevent incorrect connections • Large memory capability (2GB) using built-in SD card... Power Meter
Kyoritsu 6315 Simultaneous Power & Power quality measurementsPower/ Harmonics/ Waveform/ Power quality are recorded at all CHs. (Voltage: 3ch, Current 4ch)   • Helpful support functionsQuick Start Guide, Wiring check and Sensor detection for easy and reliable measurement   • Measurement with high accuracy Guaranteed accuracy: ±0.3%rdg (energy),±0.2%rdg (voltage/ current) Complies with the International Standard IEC 61000-4-30 Class Sand the... Power Meter
Kyoritsu 6300 12 kinds of power measurements Voltage (RMS), Current (RMS), active power, apparent power, reactive power, active energy, apparent energy, reactive energy, power factor (cos θ), frequency , demand measurement, current flowing on the neutral line(Only on 3 phase 4 wire measurement) Regenerative electric power can be measured Detection of consumption power and regenerative electric power Regenerative electric power: This is the electric power which is generated... Power Meter
Kyoritsu 6310 Can measure Flicker in accordance to IEC 61000-4-15 and EN50160 standards. Using our Flicker sensor, available as optional accessory, Pst value (short term severity in 10 minutes value) and the Plt value (long term severity in 2 hours value) can be measured. • 12 kinds of Power Measurements for Power Control and Applicable to Power Quality Control including Harmonics Analysis. • One click easy-to-use operation helps complicated setting and processing of large data through... Power Meter
Kyoritsu 8325F Flicker Sensor Can measure Flicker in combination with KEW6310. For use with following model 6310 Power Meter
Kyoritsu 8128 Load current clamp sensor Applicable model 5010/5020, 6300, 6305, 6310, 6315 Power Meter
Kyoritsu 8127 Load current clamp sensor Applicable model 5010/5020 (*), 6300, 6305, 6310, 6315 * When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors. Power Meter
Kyoritsu 8126 Load current clamp sensor Applicable model 5010/5020 (*), 6300, 6305, 6310, 6315 * When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors. Power Meter
Kyoritsu 8125 Load current clamp sensor Applicable model 5010/5020 (*), 6300, 6305, 6310, 6315 * When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors. Power Meter
Kyoritsu 8124 Load current clamp sensor Applicable model 5010/5020, 6300, 6305, 6310, 6315 Power Meter
Kyoritsu 8115 Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test. • Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A. Sensors, Multi-Trans, Clamp adaptors
Kyoritsu 8006 AC CLAMP ADAPTOR • Model 8006 is designed to measure AC current up to1500A. • It can accommodate up to 60mm-dia conductor or 50mm by 75mm bus-bar. Sensors, Multi-Trans, Clamp adaptors
Kyoritsu 8112 AC CLAMP ADAPTOR • Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters. Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts. Sensors, Multi-Trans, Clamp adaptors
Kyoritsu 8112BNC AC CLAMP ADAPTOR Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112. Sensors, Multi-Trans, Clamp adaptors
Kyoritsu 8113 AC/DC CLAMP ADAPTOR • Model 8113 is a clamp-on AC/DC current/voltage converter that permits AC/DC current measurements from 1mA to 200A in conjunction with a voltmeter having 0.1mV resolution. Sensors, Multi-Trans, Clamp adaptors