|
Help
|
|
This section contains information about purchasing items from our company. |
About KKInstruments
|
|
|
Hioki Bare Board HiTester 1231-11
|
|
Semiconductor Package Board Testing System Utilizing Index Table Method
The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards. |
Bare Board Testing
|
|
|
Hioki Bare Board HiTester 1236-11
|
|
Super-High-Speed Testing System for Boards with Embedded Passive and Active Devices Utilizing the Index Table Method
The 1236-11 is a bare board test system that harnesses Hioki’s populated board testing technology and includes support for next-generation boards with embedded passive and active devices. It features mass-production capabilities that uses test heads (test fixtures) to test fine pitch boards. |
Bare Board Testing
|
|
|
Hioki Bare Board HiTester 1232-11
|
|
High-Precision Batch Fixture-Type Testing System that Support Boards with Embedded Passive and Active Devices
The 1231-11 is a bare board tester that utilizes the full range of Hioki’s in-circuit testing technologies to deliver LSI reliability testing, complex component separation testing, high continuity and insulation testing, and more. |
Bare Board Testing
|
|
|
Hioki Bare Board HiTester 1230
|
|
All-In-One Solution for Testing the Reliability of Connections on Printed Circuit Boards
The 1230 is a bare board tester with the testing capabilities of an in-circuit tester, delivering highly consistent low-resistance measurements with high speed high precision. |
Bare Board Testing
|
|
|
Hioki X-Y C HiTester 1116 Series
|
|
100 Steps/Second Ultra-High Speed Board Pattern Inspection System
The 1116 Series are high-speed substrate testers that use capacitance testing to greatly reduce the number of testing steps and time required compared to the continuity testing method. They support ordinary bare boards to high-density BGA, CSP, or MCM packages, as well as flexible boards.
1116-71 (Offline type) 1116-72 (Single-robot transport) 1116-73 (Offline, with 1945-21 and 1945-22) 1116-74 (Single-robot transport, with... |
Bare Board Testing
|
|
|
Hioki X-Y Board HiTester 1270, 1271
|
|
Double-sided Board Tester with Maximum Measurement Speed of 0.012s/Step
The 1270 and 1271 are fixtureless, dual-sided, bare board testers that provide superior cost performance. Using a total of four arms, two in front and two in back, it is capable of simultaneously testing both sides of an optional board, and is available with a4-terminal resistance measurement function that enables measurement of very small resistances in IVH or through holes.
Testable board dimensions (1270): 50 × 50... |
Bare Board Testing
|
|
|
HIO0041 Hioki 3554 Battery Tester-Japan
|
|
Re-designed circuit for super resistance to noise
Store up to 4800 sets of battery data in internal memory and manage records on your PC
Auto-hold and Auto-store functions make measurement and recording simple and hands-free
Strengthened (and user-exchangeable) probe tip means less chance of breakage and more constant workflow
|
Battery testers
|
|
|
Hioki Clamp meters (Malaysia)
|
|
All range of Hioki clamp from Japan. |
Clamp meters
|
|
|
HIO0004-Hioki 3282 Frequency Clamp On Hi-Tester (TRMS)
|
|
From Japan
AC Current/Voltage, Frequencies, Resistance, Conduction check, Temperature (probe sold separately)
Wave peak value, Waveform distortion check
Auto-power off to prevent the power from being left on
Non-fuse type protects up to 600 V AC
1000 A AC Ø 46 mm
|
Clamp meters
|
|
|
Hioki Clamp on Earth Tester FT6380, FT6381
|
|
Lightweight Ground Clamps with Bluetooth® Data Transfer
The FT6380 and FT6381 measure grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load... |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|
|
Hioki Clamp on Leak HiTester 3293-50
|
|
1mA to 1000A AC Leakage to Load Current Clamp Meter with 10 µA Resolution in Innovative Flip Design
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3293-50 features a thin and compact clamp core that can measure current between a wide 30mA to 1000A range. The clamp meter is constructed so that the position of the display panel can be adjusted to suit the measuring location, and the back light makes it easy to use... |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|
|
Hioki ClampLogger LR5051
|
|
2-channel Current Logger to Easily Record Load Current of 50/60Hz Lines and Leak Current
Hioki compact 1 or 2-channel data loggers feature a 60,000 data set/channel memory to measure temperature, humidity, voltage or instrumentation signals. The LR5051 logs current over 2 channels in as fast as 1 second intervals.
Customers using the previous Model 3636-20 Clamp Logger should note that the LR5051 can only record 15,000 points of average data, vs. 32,000 data points available in the 3636-20.... |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|
|
Hioki Clamp on Leak HiTester 3283
|
|
1mA to 200A AC Leakage Current Clamp Meter with 10 µA Resolution to Analyze Distorted Waveforms
• True RMS • AC leak current and load current testing • 10 mA leak current range with 10 µA resolution • Load current up to 200 A |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|
|
Hioki Clamp on HiTester 3291-50
|
|
60A to 1000A AC Load Current Clamp Meter with 45Hz to 400Hz bandwidth in innovative flip design
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3291-50 features a thin and compact clamp core that can measure load current between a wide 60 to 1000A range. The clamp meter is constructed so that the position of the display panel can be adjusted to suit the measuring location, and the back light makes it easy to use... |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|
|
Hioki Clamp on HiTester 3280-10, 3280-20
|
|
42A to 1000A AC Current Clamp Meters with Double Opening Jaw and Slim Profie to Get into the Narrowest Spaces
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3280-10 and 3280-20 are our most popular clamp on meters, featuring a thin and compact clamp core that lets you get into the tightest spots. |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|
|
Hioki Digital- Clamp on HiTester 3281, 3282
|
|
600A and 1000A AC Load Current Meters and Multifunctional Testing and Distorted Waveforms
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3281 and 3282 are True RMS clamp meters measuring up to 600A and 1000A load currents, and are housed in a rugged body for long use. |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|
|
Hioki Clamp on Adapter 9290-10
|
|
AC Current Transformer to Meet Applications Exceeding 1000A AC
Hioki clamp sensors are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 9290-10 is a clamp-on adapter rated for 1500A AC, and features a 10:1 CT ratio. In addition to the large clamp diameter, broad frequency characteristics and good phase characteristics, the CT reliably provides Hioki clamp on power meters with expanded range and large current measurements.
Note: Cannot use... |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|
|
Hioki Clamp on AC/DC HiTester 3290, 3290-10
|
|
20A to 2000A AC/DC Clamp Meter System with Waveform Output Function and Wide 1.00Hz to 1000Hz Bandwidth
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3290 and 3290-10 feature detachable clamp sensors to offer a maximum 2000A current range. |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|
|
Hioki Clamp on AC/DC HiTester 3287
|
|
10A/100A AC/DC Clamp Meter with Continuity Check and Resistance Testing Capabilities
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The Hioki 3287 is an AC/DC current and voltage clamp meter that also measures continuity and resistance, featuring a double jaw lever and slim profile for easy access to crowded wires. |
Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
|
|