|
Kyoritsu 5010 (for Current) / 5020 (for Current & Voltage)
|
|
3 channel inputs for the simultaneous recording of Leakage Current, Load Current and Voltage
•
Power Quality analysis(only on KEW 5020)(Power Quality:Reference voltage, Swell, Dip, Short power Interruptions)
Large Capacity for storing 60,000 data points
60,000 data points can be recorded when 1ch is used, and when all the three channels are used, 20,000 data points per channel can be recorded
Lowpass Filter will filter out the... |
Logger
|
|
|
Kyoritsu 3321A
|
|
AC Voltmeter with linear, easy-to-read scales.
•
Auto discharge function; any charge stored in the circuit under test will be automatically discharged after testing.
•
Designed to meet IEC/EN 61010-1 CAT.III 600V, CAT.II 1000V
•
Color-coded scales for easy reading.
•
Back light function to facilitate working at dimly illuminated locations.
•
Test lead set with remote control switch.
•
Shoulder strap for hands free.
|
Analogue Insulation Tester
|
|
|
Kyoritsu 5201
|
|
Digital Illuminometer
•
Model 5201 is a highly portable and compact digital illuminometer for measuring illuminance from 0.1 to 19,990 Lux, with auto range switching.
•
The digital display is held for a preset time (about 20 seconds) and, therefore, facilitates reading, recording and measuring in any direction.
|
Digital Illuminometer
|
|
|
Kyoritsu 7019
|
|
Applicablemodel
5402D
•
1,500mm
|
Test Leads
|
|
|
Hioki Chemical Impedance Analyzer IM3590
|
|
Wide band 1mHz to 200kHz Chemical Impedance Analyzer for Testing Electrochemical Components and Materials, Batteries, and EDLC
Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The IM3590 is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing.
This product is... |
LCR | Resistance | Battery Testers
|
|
|
Hioki Leak Current Hitester ST5541
|
|
Leakage Current Testing According to IEC60990, IEC60335, and other Safety Standards
To ensure the safe use of electrical products, electrical safety tests such as insulation resistance, withstand voltage, ground resistance, and leakage current must always be conducted. Hioki Leakage Current Testers comply with laws and standards regarding medical electrical equipment as well as non-medical electrical equipment, and can be used to measure leakage current in all types of electrical products from... |
Leakage Current | Insulation | Withstand Voltage (HiPot) Testers
|
|
|
Hioki Power Hitester 3193-10
|
|
DC, 0.5 Hz To 1 MHz, 6-Channel 3-Phase 4-Wire Power Meter with Direct and Clamp Sensor Input
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3193-10 is a 6-channel power meter for testing any type of circuit ranging from single-phase lines to three-phase four-wire lines. Based on the voltage, current, and active power measurements, the power meter calculates... |
Power Meters | Power Analyzers | Clamp On Power Meters
|
|
|
Hioki Safety HiTester 3258
|
|
World’s First Non-Metallic Contact Voltage Tester Measures 600V With Optimal Safety
Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3258 is a line voltage tester that employs a coupling capacitance cancellation method to measure voltage in AC circuits without requiring metal-to-metal contact. Voltage can be measured safely at practically any location, on either insulated or exposed metal conductors. |
Digital Multimeters (DMM) | Handheld Testers
|
|
|
Hioki Bare Board HiTester 1231-11
|
|
Semiconductor Package Board Testing System Utilizing Index Table Method
The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards. |
Bare Board Testing
|
|
|
GW INSTEK GDS-1000A-U Series
|
|
Features
* 150/100/70MHz Bandwidths* 1GSa/s Real-Time Sample Rates Maximum, 25GSa/s Equivalent-Time* 2Mega Points Record Length* 2mV~10V Vertical Scale* 1ns~50s Horizontal Range* Up to 27 Automatic Measurements* 5.7" TFT LCD Display* USB Host and Device Interface Supported* Go/NoGo Function* Data Logger* Limited Lifetime Warranty |
Digital Oscilloscopes
|
|
|
GW INSTEK GDS-1000-U Series
|
|
Features
* 100/70/50 MHz Bandwidth with 2 Input Channels* 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling * 4k Memory Length per Channel * Peak Detect as Fast as 10ns * Save/Recall of 15 Front Panel Settings & Waveforms * 5.7" TFT Color Display * 19 Auto Measurements * Arithmetic Operators - Add, Subtract, FFT * USB Port for PC Connection* Data Logger * Limited Lifetime Warranty
|
Digital Oscilloscopes
|
|
|
GAS DNA IR-20 Non-Contact Fixed Infrared Thermometer
|
|
IR-20 non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA). It can measure from 0 ℃ to maximum 400℃ in the distance of 10:1 D:S (Distance to Spot). Emissivity is 0.95 (fixed). |
Fixed Infrared thermometer
|
|
|
ATAGO PAL-1 Digital Hand-held "Pocket" Refractometer
|
|
With its wide measurement range (Brix 0.0 to 53.0%) the PAL-1 works perfectly in measuring almost any fruit juice, food, or drink, such as soup, sauce, ketchup, tomato sauce, low-sugar jam, or marmalade. |
Digital Hand-Held "Pocket" Refractometer PAL
|
|
|
BANTE PHscan10S Pocket pH Tester
|
|
PHscan10S pocket pH tester is equipped with a standard pH
electrode (Round glass bulb) that used to measure the pH of
non-viscous, non-high temperature liquids, e.g., wastewater,
tap water, drinking water, rainwater, etc.
Features:
2 points push-button calibration with auto-buffer recognition.
Hold function freezes the current displayed value for easy viewing.
Auto-power off feature helps you effectively conserve battery... |
pH Meters
|
|
|
GW INSTEK AFG-3000 Series
|
|
Features
* Wide frequency range from 1uHz to 80/50MHz* High 200MSa/s sampling rate * 16-bit Amplitude Resolution* Output from any section of 1M-point-long waveforms* 4.3" high resolution LCD display/on-screen help/Impedance switch* Four ways to generate arbitrary waveforms: Front Panel Operation CSV file uploading, Direct Waveform Reconstruction (DWR), ArbitraryWaveform Editing PC Software * USB, RS-232, GPIB interface support |
Arbitrary Function Generators
|
|
|
GAS DNA GMS1000 Single -Channel digital controller for gas detector
|
|
GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily... |
Digital Controller
|
|
|
Center CENTER 25 - Flexible Current Probe
|
|
Plug into multimeters, oscilloscopes, or power analyzers to measure AC current, up to 3000 A ac. Center 25 is also ideal for commercial or residential users who have standard clamp meters, but need to reach hard-to-clamp-on places, or occasionally measure AC current higher than 400 or 600 A. Center 25 simply eases your work. |
Flexible_Clamp
|
|
|
Center CENTER 300 - Thermometer (K Type, PC Interface)
|
|
This series of thermocouple thermometers are micro controller based testers. With very intuitive interface, the user can fully operate the tester without second thought. They are digitally calibrated for long time stability. The whole series are equipped with PC interface for advance applications. |
Thermocouple
|
|
|
Center CENTER 340 - Thermo Recorder (Datalogger, Waterproof)
|
|
CENTER 340 is a temperature dataloggers. Even though these units are focused on data collecting, we placed a LCD to show the operator on site information. In case of dark environment, it is also equipped with backlit display. Both units feature a real time clock inside so that the event are captured with time stamps. The recording memory can hold up to 64000 records which can provide high resolution test results.
With waterproof hosing, the temperature datalogger 340 has a lot of... |
Recorders
|
|
|
Center CENTER 320 - Sound Level Meter
|
|
Our standard sound level meter CENTER 320 has a wide dynamic range from 30 to 130 dB. It has different frequency weighting A and C to respond to human sense or machine monitoring purposes. For different sound pattern, it also supplies Fast and Slow time constant setting. Analog output is also provided for other use. |
Sound_Meters
|
|