By Brands

Sub Categories

Logo
Lutron Electronic Enterprise Co., Ltd. was established in 1976 and has been the Taiwan's leading...
mitcorp
Certified by the well-known vehicle brands Audi, Skoda, VOLVO and Volkswagen, Mitcorp embodies a...
Yokogawa’s Portable and Handheld Instruments offer a broad range of portable test equipment to...
  • Filter
  Name SKU Description Category
GW INSTEK GOS-630FC Features * 1mV/div High Vertical Sensitivity * Internal 5 Digits Real-Time Frequency Counter * LCD Readout Display for Vertical/ Horizontal/Frequency Measurement * Auto Time-Base * Buzzer Alarm * TV(TV-V, TV-H) Trigger Modes * XY Mode * Z-Axis Input and External Trigger Input Analog Oscilloscopes
GW INSTEK GOS-630/GOS-620 Features * 30/20MHz Bandwidth, Dual Channel * High Sensitivity 1mV/div * TV Synchronization * Z-Axis Input * ALT Triggering Function * CH1 Output Analog Oscilloscopes
GW INSTEK GLA-1000 Series Features * 32/16 Input Channel * Time Analysis : Up to 200MHz Internal Sampling Rate * State Analysis : Up to 100MHz External Input Clock * Memory Depth : Up to 2Mbits/1Mbits (Half/Full Channels) * Enable Qualifier : High/Low Level Enable and Enable Delay Function * Signal Analyzer : I2C, RS-232C Protocol Analyzer and Signal Statistics * File Export : Signal Data, Operation Setting and Display Image * USB 2.0 Supported(1.1 Compatible) Logic Analyzers
GW INSTEK GDB-03 Features * Application for GDS-3000 demo and oscilloscope training* 5Vdc Power Input (Support USB Power, interface Type B) Oscilloscope & Training Kit
GW INSTEK GDB-02 Features * Application for GDS-Series and GLA-Series* 5Vdc Power Input (Support USB Power, interface Type B) Oscilloscope & Training Kit
GAS DNA DA-50 Series SMART Gas Detector/Transmitter(4~20mA) with built-in LCD DA-50 detects various combustible & toxic gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. DA-50 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more... Gas Detector
GAS DNA DA-100 Series (explosion proof) SMART Gas Detector/Transmitter(4~20mA) & Explosion Proof DA-100 detects combustible or toxic gas leakage and transmits standard electric current output signal 4 ~ 20mA to be connected with various controllers such as gas leakage warning device (GMS-1000/1500/2000), PLC, DDC, or MMR for individual or integrated gas monitoring system(controller). Gas Detector
GAS DNA DA-500 Series (explosion proof) SMART Gas Detector/Transmitter(4~20mA) with built-in LCD & explosion proof DA-500 detects various combustible & toxic gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. DA-500 converts digital signal into the 4-20mA standard current output signal which can be transmitted to various devices such as PLC, DDC, or recorder to build comprehensive gas monitoring system. Also, DA-500 provides RS-485 communication signal and alarm relay contact. DC 4-20mA standard... Gas Detector
GAS DNA DA-750 Series SMART Gas Detector/Transmitter(4~20mA) with built-in LCD – Suction Type DA-750 detects leakage of various toxic or combustible gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. Built-in micro pump suctions gas continuously which is effective gas sampling especially for closed area. DA-750 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on to... Gas Detector
GAS DNA DA-800 Series (explosion proof) SMART Gas Detector/Transmitter(4~20mA)with built-in LCD & explosion proof, Suction Type DA-800 detects various combustible & toxic gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. Built-in micro pump for gas sampling enables effective gas detection especially for the environment where diffusion type gas detectors cannot be used. DA-800 converts digital signal into the 4-20mA standard current output signal which can be transmitted to various devices such as PLC, DDC, or... Gas Detector
GAS DNA CO2 Detector CD-30M/30I CD-30M/30I are designed for air conditioning system being installed on air conditioning duct system. With built-in transmitter, CD-30M/30I can detect CO2 gas density using NDIR (Non Dispersive Infrared) and convert the measured density signal into linear current or voltage signal to be transmitted to external monitoring unit or controlling unit such as PLC or DDC. Gas Detector
GAS DNA CO Detector CD-10 CO gas detection & alarm unit specialized for underground parking area CD-10, the artificial intelligent CO gas alarm unit specialized for underground parking area, using electro-chemical sensor, detects CO gas density and provides the measured density signal to both 2 step relay output and standard current signal output (DC 4-20mA) to be connected to various external devices to carry out underground parking area atmosphere environmental monitoring. Gas Detector
GAS DNA Audio-visual display Gas Detector DA-91 Series DA-91 series detects leakage of various toxic or combustible gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. Gas Detector
GAS DNA Wireless Indoor Air Quality Monitor IAQ-700 IAQ-700 is a high accuracy indoor air quality monitor, which measure VOC. CO2, Temperature, Humidity and dust. Through large size of graphic LCD, it provides real-time monitoring and can transmit data wirelessly through built in ZigBee. After install indoor Watch (software), it enable to collect data at a long distance. Relay Contact make it possible to interwork with a ventilating system. It has been installed to measure Air quality of indoor or underground spaces like Factories, schools,... Gas Detector
GAS DNA SD-50 Smoke sensor SD-50, the smoke detector with built-in micro processor, receiving signal from sensor and comparing it with preset alarming value, if it exceeds, transmits the relay output to be connected to PLC/DDC. Usually, the other smoke detectors designed only for fire alarm cannot be used for industrial use because it cannot secure enough accuracy and stability. However, SD-50 accommodating highest accurate ionization sensor and industrial detector technology, secures best accuracy and stability at the... Smoke sensor
GAS DNA SD-110 2-Channel Smoke sensor SD-110 is a microprocessor internal 2-channel smoke detector. SD-110 is an environment-adaptive smoke detector which displays the concentration on the back light LCD by receiving the serial signals from two sensors and by processing them in the digital mode, and performs the variety of local functions in digital process mode. Also, it can ensure the effective remote control by stably outputting the analog serial signals to external control unit such as PLC/DDC. As one of big advantages of... Smoke sensor
GAS DNA TS-60 Non contact Temperature + Smoke Detector TS-60 is built-in Non contact Infrared thermometer and smoke sensor. The most of existing temperature and smoke sensors in markets can detect fire after the heat reach to temperature and smoke detector. However, TS-60 detects the fire by increased infrared amount and low concentrated smoke in early stage of the fire and enables to prevent the fire in advance. Smoke sensor
GAS DNA IR-20 Non-Contact Fixed Infrared Thermometer IR-20 non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA). It can measure from 0 ℃ to maximum 400℃ in the distance of 10:1 D:S (Distance to Spot). Emissivity is 0.95 (fixed). Fixed Infrared thermometer
GAS DNA IR-20-4W Non-Contact Fixed Infrared Thermometer IR-20 non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA). It can measure from 0 ℃ to maximum 400℃ in the distance of 10:1 D:S (Distance to Spot). Emissivity is 0.95 (fixed). Fixed Infrared thermometer
GAS DNA IR-21 Non-Contact Fixed Infrared Thermometer IR-21 non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA) or RS-485 communication signal output. It can measure from 0 ℃ to maximum 400℃ in the distance of 12:1 D:S(Distance to Spot). Fixed Infrared thermometer