|
TES-1335 Digital Light Meter
|
|
Spectral Sensitivity close to CIE photopic Curve.
Measuring Levels Ranging 0 to 400,000 Lux, 0 to 40, 000 fc.
Accurate and Instant response.
Data Hold function.
MAX/MIN function.
Peak Hold function.
Relative function.
Cosine Angular corrected.
Auto-Power-Off function.
CNS 5119 class11
|
Light Meter
|
|
|
TES-1336A Datalogging Light Meter (USB)
|
|
Spectrum of photo sensor meets C.I.E. photopic curve V( l )
16000 Records Data logging capacity
USB interface (software included)
Measurement of luminous intensity (PC Software)
|
Light Meter
|
|
|
TES-1339 Light Meter Pro.
|
|
Dual Display, 4-digit LCD reading.
Spectral Sensitivity close to CIE photopic Curve.
Measuring Levels Ranging 0.01 to 999900 Lux,0.01 to 99990 fc, Autoranging 5 step.
Accurate and Instant response.
Integral illuminance measurement.
Luminous intensity measurement.
Data Hold function.
Data memory and read function.
Reference value setting for relative or percentage deviation measurement.
Ripple measurement for STRAY + LIGHT function.
Time-hold function.
Point - average... |
Light Meter
|
|
|
TES-1339R Data Logger Light Meter Pro.
|
|
Dual Display, 4-digit LCD reading.
Spectral Sensitivity close to CIE photopic Curve.
Measuring Levels Ranging 0.01 to 999900 Lux,0.001 to 92927 fc, Autoranging 5 step.
Accurate and Instant response.
Integral illuminance measurement.
Luminous intensity measurement.
Data Hold function.
Data memory and read function.
Data logger function.
Reference value setting for relative or percentage deviation measurement.
Ripple measurement for STRAY + LIGHT function.
Time-hold function.
Point... |
Light Meter
|
|
|
TES-1800 LOOP / PSC Tester
|
|
TES-1800A (230V) TES-1800B (110V)
Large custom high contrast display.
Auto lock out if test resister overheats.
Voltage indication.
Measure low loop with 0.01 W resolution.
High loop range permit measurement of ground spikes.
Microprocessor controlled.
|
Loop / PSC Tester
|
|
|
TES-1340 Hot-Wire Anemometer
|
|
Fast Response Probe.
Air Flow Volume
Instant / Avg / 2/3 Vmax Flow Measurement.
Velocity m/s, ft/min, knots, km/hr, mph.
Data hold & Maximum / Minimum function.
Manual data memory and read function (10 x 99 sets).
LCD triple display.
Auto power off function ON / OFF Time setting.
Backlight function ON / OFF Time setting.
Snake telescoping probe.
|
Anemometer
|
|
|
1341 Hot-Wire Anemometer
|
|
Fast Response Probe.
Air Flow Volume.
Instant / Avg / 2/3 Vmax Flow Measurement.
Velocity m/s, ft/min, knots, km/hr, mph.
Temperature & Humidity measurement.
Calculate Dew point temperature, Wet bulb temperature, Wind chill temperature, Humidex temperature and Heat index temperature.
Data hold & Maximum / Minimum function
Manual data memory and read function (10 x 99 sets).
LCD triple display.
Telescoping probe.
USB interface.
|
Anemometer
|
|
|
AVM-301/AVM-303 Anemometer
|
|
Sensitive and Accurate
Ergonomic and easy-to-use design
Large 4 digits LCD (Liquid Crystal Display)
1.8 meters coiled cable and mounting nut for long extension
Low power consumption
Hold/Max/Min/Ave functions
Build-in low battery indicator
Smart Auto-Power-Off (10 minutes)
RS-232C Interface with PC (AVM-303)
Optional Thermal Printer PROVA 300XP (AVM-303)
|
Anemometer
|
|
|
AVM-305 Anemometer
|
|
Sensitive and Accurate
Ergonomic and easy-to-use design
Large 4 digits LCD (Liquid Crystal Display)
1.8 meters coiled cable and mounting nut for long extension
Low power consumption
Hold/Max/Min/Ave functions
Build-in low battery indicator
Smart Auto-Power-Off (10 minutes)
RS-232C Interface with PC
Optional Thermal Printer PROVA 300XP
Air temperature measurement
|
Anemometer
|
|
|
AVM-01/03 Anemometer
|
|
Sensitive for low/high air velocity
Ergonomic Design
0.0~45m/s range
|
Anemometer
|
|
|
AVM-05/07 Flow Anemometer
|
|
Flow (CFM,CMM)
Instant, Ave, 2/3max Flow Measurement
Velocity m/s, ft/min, knots, Km/hr, mph
LCD Dual Display
℃ / ℉
|
Anemometer
|
|
|
TES-1381 Conductivity & pH/ORP Meter
|
|
pH, mV, Conductivity, TDS, Resistivity, Salinity, Concentration and Temperature measurement functions.
0.001pH, 0.1mV, 0.001µS/cm, 0.001mg/L and 0.1°C / °F Resolution.
Programmable Temperature Coefficient for conductivity measurement.
Auto / Manual Temperature Compensation for pH and conductivity measurement.
Practical Salinity in the Range of 0 to 42.0, in accordance with UNESCO data measurement.
Dual display with temperature Simultaneously.
Easy & Fast to operate.
Ideal for... |
PH Tester
|
|
|
TES-1380 PH / ORP / Temperature Meter
|
|
Fast and Easy pH measurement
Dual LCD display shows PH/℃& ℉ or mV/ ℃&℉ simultaneously
Logging 99 readings
|
PH Tester
|
|
|
WM-01/02 Power Analyzer Datalogger
|
|
4 LCD Displays with W, PF, V, A
Easy Plug-in and Test
RS-232 Computer Interface
|
Power Analyzer
|
|
|
PROVA-8500 Energy-Saving Tester
|
|
Standby power measurement ( 0 to 100W width 0.001W resolution)
Regular power(0~2000W)
100W AC power supply + AC power analyzer]
Programmable nominal output (85V to 250V , 45Hz to 65Hz)
power quality measurement (W , PF , V , A)
PC programmable through RS-232C interface( Optional RS-232C to USB bridge)
Programmable Over current protection (OCP)
Memory of 99 preset voltage and frequency
Standby and Operation Button
Back space for easy correction
Standby power measurement of note... |
Power Analyzer
|
|
|
PROVA-6600 3 Φ Power Clamp
|
|
3 f 4W, 3 f 3W, 3 f Balanced, 1 f 2W, and 1 f 3W Power Measurement.
AC+DC true power, and True RMS AC Voltage and Current
AC+DC 2000A, AC 600V, DC 800V
AC+DC 1200KW(1 f ), AC+DC 2000KW (3 f )
Dual Display V+Hz, A+Hz, W+PF, KVA+KVAR, V+A
Phase Angle Measurement
3 f RST(L1L2L3) Sequence Indication.
Memory of 4 records.
DCA/DCW Auto Zero when power clamp powering on.
AC/DC Auto Detection.
Auto range.
|
Power Clamp Meter
|
|
|
PROVA-6601 3 Φ PF Power Clamp
|
|
PF( 3 Φ 3W , 3 Φ 4W 1Φ 2W )
AC+DC 2000A, 600V Power Factor
AC+DC 1200KW(1 Φ ) AC+DC 200KW(3Φ )
AC/DC Auto Detection
Dual Display V+Hz, A+V,KW+PF,KVA+KVAR
|
Power Clamp Meter
|
|
|
TES-3063/3064 Power AC/DC Clamp Meter
|
|
1 Φ 2W, 1 Φ 3W,3 Φ 3W,3 Φ 4W
RS-232 interface to talk with PC
4 digits with dual display LCD
Amp / Voltage f requency measurement
Dual display KW+PF , KVA+PF , V+A
4000 continuity point data logger , 25 point manual data logger
True power / apparent power / power factor measurement
True RMS. V , A , W , cap , lnd , phase indicator
MIN / MAX measurement
Peak hold detector
Dual display A+Hz , V+Hz
EN61010-1 600V Installation CAT III Pollution Degree 2 |
Power Clamp Meter
|
|
|
TES-3079K Power Clamp Meter
|
|
HVAC Application:
Check current draw in motors and compressors.
Use MAX/MIN/Recording in the temperature mode to assess efficiency.
Test run/start capacitors.
Confirm low voltage control signals.
Measure flame safeguard device current draw.
Confirm power sources.
Analyze temperature and voltage or current data with the aid of the time stamp.
Insulation test up to 100M Ω.
Electrical Application:
Check for energized circuits and balance loads.
1 Φ /3 Φ (3P3W/3P4W)Power... |
Power Clamp Meter
|
|
|
AC Voltage (50Hz to 400 Hz):Trms Range Resolution Accuracy Sensitivity Overload Protection 999.99 mV 0.1mV ±1% ± 0dgts(50,60Hz) ±2%±20dgts(40~100Hz) 2.0mV 600V 9.999 V 1mV 0.020V 99.99V 10mV ±1% ± 20dgts(50,60Hz) ±2% ±20dgts(40~
|
|
3-3/4 Digital LCD, 4000 count, Autoranging.
Trms KW, Current, Voltage measurement.
AC Current 0.1A to 700A.
Resistance and Continuity test.
Data hold & MAX function.
Pocket size.
Auto Power off.
IEC1010-1 CAT III 600V
|
Power Clamp Meter
|
|