|
BANTE 950 Precision Conductivity/TDS/Salinity/Resistivity/°C/°F Meter
|
|
Bante950 is a professional multi-range conductivity meter which
used for measuring the conductivity, TDS, salinity and resistivity
of liquids.
Features:
Up to 5-point push-button calibration allows user to uses customized
calibration solutions.
Adjustable TDS factors, cell constants, temperature coefficients and
normalization temperature.
In salinity measurement modes, selectable practical salinity (PSU) or... |
Conductivity Meters
|
|
|
BWG0003-CO SINGLE GAS DETECTOR CANADA (CARBON MONOXIDE)
|
|
-Range: 0 ~ 1000 ppm- Complete with IP/66/67 concussion-proof housing, sensor, field replaceable battery, sensor, stainless steel alligator clip, calibration / test cap and hose, instructions and laminated quick reference card.- Datalogging- Audible, visual and vibrating alarms- 2 years warranty
· Concussion-proof durable · Monitors any of 13 toxic gases or oxygen
|
Gases (Workplace Safety)
|
|
|
BANTE P18 pH Electrode
|
|
Professional pH electrode, Suitable for measurement of slurries.
Model
P18
pH Range
0 to 14pH
Temperature Range
0 to 80°C
Ref. Type
AgCl
Junction Type
Annular Ceramic
Body Type
Glass
Dimensions
12(Dia.)×120(L)mm
Connector:
... |
pH Electrodes
|
|
|
BANTE Silver Ion Selective Electrode (UK)
|
|
|
Ion Selective Electrodes
|
|
|
BANTE PHS-3CW series Basic pH/mV Meter
|
|
PHS-W series is an easy-use basic pH meter designed for daily
testing and controls are required.
Automatic Calibration:
The meters is capable of calibrating up to 2 points using USA or
NIST pH standard buffer. Press the CAL key to enter calibration
mode and immerse pH sensor into indicated calibration solutions,
press ENTER key and meter is automatically calibrated.
Auto-Buffer Recognition:
During the calibration, if the calibration solution does not match meter... |
pH Meters
|
|
|
BANTE 321-S Portable Sulphide Ion Meter
|
|
Features:
2 to 5 points push-button calibration from low to high concentrations.
Selectable multiple concentration units, including ppm, mg/L and mol/L.
Direct readout ion concentration simplifies the elaborate measurement
process.
mV measurement allows user to check performance of ion electrode.
AutomaticTemperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Automatic endpoint function freezes the stable... |
Ion Meters
|
|
|
BANTE 903P Portable pH/ORP/DO/°C/°F Meter
|
|
Bante 903P portable multi-parameter meter used for measuring
the pH, ORP and Dissolved Oxygen in water.
General Features:
Automatic Temperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Calibration due reminder prompts you to calibrate the meter regularly.
Automatic endpoint function freezes the stable measured values for
easy reading and recording data.
Manual temperature calibration provides... |
Oxidation Reduction Potential Meters
|
|
|
BWG0015-NH3 (AMMONIA) GAS DETECTOR WITH SOUND,VIBRATION ALARM (MADE IN CANADA)
|
|
Range:0~100ppm- Complete with IP/66/67 concussion-proof housing, sensor,field replaceable battery, sensor, stainless steel alligatorcalibration / test cap and hose, instructions and laminatedquick reference card.- Datalogging- Audible, visual and vibrating alarms- 2 years warranty
· Concussion-proof durable · Monitors any of 13 toxic gases or oxygen
|
Gases (Workplace Safety)
|
|
|
BANTE P19 pH Electrode
|
|
Professional pH electrode, Suitable for measurement of slurries. |
pH Electrodes
|
|
|
BANTE Sodium Ion Selective Electrode (UK)
|
|
|
Ion Selective Electrodes
|
|
|
BANTE PHS-3BW series Basic pH/mV Meter
|
|
PHS-W series is an easy-use basic pH meter designed for daily
testing and controls are required.
Automatic Calibration:
The meters is capable of calibrating up to 2 points using USA or
NIST pH standard buffer. Press the CAL key to enter calibration
mode and immerse pH sensor into indicated calibration solutions,
press ENTER key and meter is automatically calibrated.
Auto-Buffer Recognition:
During the calibration, if the calibration solution does not match meter... |
pH Meters
|
|
|
BANTE 930 Precision pH/ORP/Ion/°C/°F Meter
|
|
Features:
During the pH mode, Up to 5 points push-button calibration with auto-
buffer recognition.
Selectable pH buffer standards and temperature units.
Automatically calculates and displays electrode slope after calibration.
During ORP mode, Single point offset calibration allows user adjusts
displayed value to a known standard.
Absolute or Relative millivolt (R.mV) measurement provides accurate
ORP readings.
... |
Ion Meters
|
|
|
BANTE 904P Portable Conductivity/DO/°C/°F Meter
|
|
Bante 904P portable multi-parameter meter used for measuring
the Conductivity, TDS, Salinity, Resistivity and DO in water.
General Features:
Automatic Temperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Calibration due reminder prompts you to calibrate the meter regularly.
Automatic endpoint function freezes the stable measured values for
easy reading and recording data.
Manual... |
Oxidation Reduction Potential Meters
|
|
|
BWG0025-SAMPLERPAK, MOTORIZED SAMPLING PUMP PORTABLE KIT
|
|
Features:
• Manual flow block test at start up verifies performance
• Low flow alarm, battery alarm, and system fault alarm with
audible/visual warnings
• Up to 30 hours of continuous operation on a single set of AA
alkaline or rechargeable NiMH batteries
• Built-in water trap and particulate filters
• Optional extra long probes and sampling hoses available |
Gases (Workplace Safety)
|
|
|
BANTE P20 pH Electrode
|
|
General purpose pH electrode with temperature sensor. |
pH Electrodes
|
|
|
BANTE Sulphide Ion Selective Electrode (UK)
|
|
|
Ion Selective Electrodes
|
|
|
Bante210 Standard pH/mV/°C/°F Meter
|
|
Bante210 standard pH meter is an easy-use benchtop meter designed for daily testing and controls.
Features:
Large backlit LCD display shows mode indicators and help messages.
Up to 3 points push-button calibration with auto-buffer recognition.
Selectable pH buffer standards and temperature units.
Automatically calculates and shows electrode slope after calibration.
Automatic Temperature Compensationensures highly accurate
measurement over the entire... |
pH Meters
|
|
|
BANTE 931-F Precision Fluoride Ion Meter
|
|
Features:
2 to 5 points push-button calibration from low to high concentrations.
Selectable multiple concentration units, including ppm, mg/L and mol/L.
Direct readout ion concentration simplifies the elaborate measurement
process.
mV measurement allows user to check performance of ion electrode.
AutomaticTemperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Automatic endpoint function freezes the stable... |
Ion Meters
|
|
|
BANTE 901 Precision pH/Conductivity/°C/°F Meter
|
|
Bante 901 multi-parameter meter used for measuring the pH,
Conductivity and TDS of liquids.
General Features:
Automatic Temperature Compensation (ATC) ensures highly accurate
measurements over the entire range.
Calibration due reminder prompts you to calibrate the meter regularly.
Automatic endpoint function freezes the stable measured values for
easy reading and recording data.
Manual temperature calibration provides accurate... |
Oxidation Reduction Potential Meters
|
|
|
BWG0024- O3 OZONE DETECTOR WITH LED AND VIBRATION ALARM 0-1PPM
|
|
Range:0~1ppm- Complete with IP/66/67 concussion-proof housing, sensor,field replaceable battery, sensor, stainless steel alligatorcalibration / test cap and hose, instructions and laminatedquick reference card.- Datalogging- Audible, visual and vibrating alarms- 2 years warranty
· Concussion-proof durable · Monitors any of 13 toxic gases or oxygen
|
Gases (Workplace Safety)
|
|