Products

  • Filter
  Name SKU Description Category
KYO0001-KYORITSU 4118A DIGITAL LOOP TESTER Custom microprocessor controlled for highest accuracy and reliability. • 3 LEDs for checking correct wiring status. • 15mA LOOP measurement:LOOP impedance 2000Ω range measurement is carried out with low test current (15mA).The current will not cause tripping out involved RCD even the one with the lowest nominal differential current (30mA). • Direct reading of Prospective Short Circuit Current (PSC). • Safe voltage measurement function. • Large... Impedance testers
KYO0167-KYORITSU 4140 LOOP/PFC/PSC TESTER (REPLACED 4120A) • Anti-Trip Technology for complete trip free Loop testing on all RCDs rated 30mA and above. • Dual Display allows simultaneous measurements like Loop & PFC/PSC. • Two wire connection for Loop L-L, L-N and PSC testing is possible. • Phase rotation, Voltage and Frequency measurements. • Lock-down test button for 'hands free' testing with auto-start operation.   • Display and front panel keyboards with Backlight to be visible... Impedance testers
KYO0102-COMBI RECORDING RCD & LOOP METER (REPLACED 4120A,4118) Kew Combitester provides the ultimate in Microprocessor technology offering Loop and RCD tests with a comprehensive memory and downloading test results. • LOOP Impedance 200/2000Ω range measurement is carried out using a test current of 15mA. This current will not trip RCD’s rated at 30mA or greater. • High resolution for low Loop Impedance (resolution of 0.01Ω) on 20Ω range. • Direct reading of Prospective Short Circuit Current (PSC) and earth fault... Impedance testers
Kyoritsu 3121A/3122A/3123A Rugged design with a hard carrying case for field use   • Detachable High Voltage Line probe   • Automatic ranges, high and low scales, indicated by different LED's   • Drip proof (IP41) High Voltage Insulation Tester
Kyoritsu 3124 Permits a wide range of insulation testing up to 100GΩ at variable test voltage from 1kV to 10kV. • DC voltage output for recorders. • Output voltage is shown on the digital display. • After tests, automatically discharges the charges stored in the circuit under test. • Operated by rechargeable Nickel-Cadmium batteries. High Voltage Insulation Tester
Kyoritsu 3125 Wide range measurements from 500V to 5000V and up to 1000GΩ. • Large digital display with Bar Graph indication and back light. • Polarization Index measurement (PI). • Timer measurement function. • Indication of Output voltage and Discharge voltage. • Auto-discharge function and Voltage output warning function. • Auto power off and Battery Check. • Safety standard IEC 61010-1 CAT.III 600V High Voltage Insulation Tester
Kyoritsu 3126 Short-Circuit Current up to 5mA • Wide range measurements from 500V to 5000V and up to 1TΩ • Large digital display with Bar Graph indication and white LED back light • Polarization Index measurement (PI), Dielectric Absorption Ratio (DAR) • Filter function reduces noise interference for obtaining stable measurement • Indication of Output voltage and Discharge voltage • Auto-discharge function and Output voltage warning... High Voltage Insulation Tester
Kyoritsu 3127 Insulation Resistance up to 10TΩ • Short-Circuit Current up to 5mA • Wide Test Voltage from 250V to 5000V • Diagnostic Insulation Tests: IR, PI, DAR, DD, SV, RAMP (Breakdown and Burn modes), Capacitance, Leakage Current • Wireless communication by Bluetooth for transferring and showing real-time data to PC and Android device • Memory and Logging functions • Filter function reduces noise interference for obtaining stable... High Voltage Insulation Tester
Kyoritsu 3128 Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions. • Suitable for analyzing the insulation characteristics of cables, transformers, motors, generators, high-pressure switches, insulators, wiring installations, etc. • 6 ranges: 500V, 1000V, 2500V, 5000V, 10000V, 12000VFine adjustment of voltage setting at each range is also possible • Graphic representation of the insulation resistance and leakage current versus time on... High Voltage Insulation Tester
KD1E Portable AC/DC neon indicator with domed contact electrode for use on systems up to 11kV  a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. High voltage detectors
KD1E/19 Portable AC/DC neon indicator with flat contact electrode for use on systems up to 19kV The KD1E/19 is a neon HV potential indicator suitable for use on earthed neutral systems up to 19kV. A highly robust portable AC/DC voltage indicator, this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits. Conforming in design lengths to recommended creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally encapsulated resistor chains. For additional safety a proving unit (PH3) is... High voltage detectors
KD1E/15D Portable AC/DC indicator with digital display for use on systems up to 15kV The KD1E/15D is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral systems up to 15kV. The potential indicator display is powered by an integral rechargeable battery and is supplied complete with battery charger and PH3 proving unit in a bespoke carrying case. This robust, highly portable digital potential indicator is supplied with a carrying case for the indicator and accessories. These instruments provide a... High voltage detectors
KD1E/33D Portable AC/DC indicator with digital display for use on systems up to 33kV Portable AC/DC indicator with digital display for use on systems up to 33kV AC/DC digital indicators Digital display Integral rechargeable battery High voltage detectors
KD1E/KAD Portable AC/DC neon indicator with audible alarm for use on systems up to 11kV Portable AC/DC neon indicator with audible alarm for use on systems up to 11kV AC/DC neon indicators Audible alarm High voltage detectors
Kyoritsu 2300R True RMS reading is an essential feature for accurate measurement. • “Non Contact” voltage function indicates the presence of AC voltage by warning the user with an audible signal. • Set the DC current range to zero in one touch with the Zero Adjust function. Fork Current Tester
Kewtech KEWPROVE3 690V AC / DC Proving Unit 50-690 V proving unit with just two terminals to test AC and DC voltage detectors Essential for proving that circuits are not live when working on electrical circuits. Kewtech Part No: KEWPROVE3 FLIR B335
Kyoritsu 8130 Can measure AC current up to 1000A • Flexible and light weight by the air core coil used at the sensor part • Designed to meet the international safety standardIEC 61010-1 CAT IV 300V, CAT III 600V Applicable model 5010/5020 (*), 6300, 6305, 6310, 6315 Flexible Clamp Sensor
Kyoritsu 8129 Flexible for various test fields • Can measure AC current up to 3000A • Flexible and light weight by the air core coil used at the sensor part • Measurable conductor size:max Φ150mm • Designed to meet the international safety standardIEC 61010-1 CAT.III 600V Applicable model 5010/5020 (*), 6300, 6305, 6310, 6315 Flexible Clamp Sensor
KAI0016 TRIAXIAL ELF MAGNETIC FIELD METER (EMF METER)-MADE IN JAPAN Tri-axial magnetic field sensor True RMS measurement in uT or mG Autoranging function Max/Min, average and display hold functions Measurement range: 0 to 200 T (0 to 2000 mG) Frequency range: 40 Hz to 1 kHz Accuracy: ± 5% EMF/Radiation
KKI0001-RADIATION FINDER Radiation Finder Introduction Electric and magnetic fields (EMF) have different properties and different ways of causing harmful biological effects. Some people become ill from many types of EMF sources, such as alarm clocks too close to their bed, sitting too close to a TV or computer, or using a cell phone. Reported symptoms are headaches, arm and leg tingling, dizziness, difficulty in concentrating, and even nausea. Although not proven, more serious problems might be caused by prolonged... EMF/Radiation