|
KD1E Portable AC/DC neon indicator with domed contact electrode for use on systems up to 11kV
|
|
a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. |
High voltage detectors
|
|
|
KD1E/19 Portable AC/DC neon indicator with flat contact electrode for use on systems up to 19kV
|
|
The KD1E/19 is a neon HV potential indicator suitable for use on earthed neutral systems up to 19kV. A highly robust portable AC/DC voltage indicator, this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits.
Conforming in design lengths to recommended creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally encapsulated resistor chains. For additional safety a proving unit (PH3) is... |
High voltage detectors
|
|
|
KD1E/15D Portable AC/DC indicator with digital display for use on systems up to 15kV
|
|
The KD1E/15D is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral systems up to 15kV. The potential indicator display is powered by an integral rechargeable battery and is supplied complete with battery charger and PH3 proving unit in a bespoke carrying case.
This robust, highly portable digital potential indicator is supplied with a carrying case for the indicator and accessories. These instruments provide a... |
High voltage detectors
|
|
|
KD1E/33D Portable AC/DC indicator with digital display for use on systems up to 33kV
|
|
Portable AC/DC indicator with digital display for use on systems up to 33kV
AC/DC digital indicators
Digital display
Integral rechargeable battery
|
High voltage detectors
|
|
|
KD1E/KAD Portable AC/DC neon indicator with audible alarm for use on systems up to 11kV
|
|
Portable AC/DC neon indicator with audible alarm for use on systems up to 11kV
AC/DC neon indicators
Audible alarm
|
High voltage detectors
|
|
|
290 HD High Voltage Testers H.V. Detector
|
|
290 HD High Voltage TestersH.V. Detector 6kV ~ 81.5kV |
High voltage detectors
|
|
|
PH3 Proving unit for use with high voltage indicators with a domed contact electrode
|
|
Proving unit for use with high voltage indicators with a domed contact electrode
High voltage output 1500V DC nominal
Neon indicator to show output is active
Very portable
|
Proving units
|
|
|
SEA0009-Type L Plus Large jaw clamp meter(United Kingdom)
|
|
100mm jaw opening
Continuous readout or store options
2000A Range
The lightweight Type L Plus large jaw current clamp meter is designed for the measurement of current in large diameter conductors and fuses. Its 100mm jaw opening allows for use in most difficult situations, and is suitable for porcelain fuse carriers in distribution systems.
High levels of insulation are incorporated for maximum safety and protection, together with the facility to provide complete linearity of... |
Current Measurement
|
|
|
SEA0008-HALO HOOK AMMETER FOR OVERHEAD POWERLINES(United Kingdom)
|
|
Ammeter for overhead powerlines
For use on overhead line systems up to 40 kV
Simple to use membrane switches
LCD display for readout and battery indicator
The Halo has been designed for measuring current flow on overhead line systems up to 40 kV (line to earth). The sensing unit is encased in a moulded plastic housing and is fully screened against the effects of electrostatic fields.The RMS reading digital display is mounted in the fibre glass tubing body of the instrument and has a... |
Current Measurement
|
|
|
SEA0002-PR11 Phasing rods with neon indication for use on systems up to 11kV
|
|
Phasing rods with neon indication for use on systems up to 11kV
For use on 3.3kV up to 11.5kV systems
PVC hand guards
Direct areas possible to all types of switchgear
|
Phasing Sticks
|
|
|
SEA0001-PR33D Phasing rods with digital reading for use on systems up to 33kV
|
|
Phasing rods with digital reading for use on systems up to 33kV
For use on earthed neutral systems up to 33kV
Proving unit included
LCD digital display
|
Phasing Sticks
|
|
|
SEA0003-PR15D Phasing rods with digital reading for use on systems up to 15kV
|
|
Phasing rods with digital reading for use on systems up to 15kV
For use on earthed neutral systems up to 15kV
Proving unit included
LCD digital display
|
Phasing Sticks
|
|
|
SEW0028-PD-28V3 HIGH VOLTAGE PROBE (PD28) DC40KV,AC28KV
|
|
*● Measures both AC and DC voltages with digital multitester.
*● Are typically used to measure high voltages in TV sets, power
* supplies and instruments in laboratories.
*● Lightweight and rugged.
*● 2 available contact tips: round needle tip for normal use and a
special flat spring-type for CRT anode. |
High voltage probes
|
|
|
275 HP High Voltage Testers H.V. Proximity Detector
|
|
H.V. Proximity Detector
8 voltage settings : 240Vac, 2kV, 3.3kV, 6kV, 11kV, 22kV, 33kV, 66kV, 132kV and 275kV. |
High voltage detectors
|
|
|
SEW0062-2713V3 PUV3 H.V. PROVING UNIT (DCV)
|
|
● Designed to proof: -Phasing sticks. -High voltage detectors (contact type only, not to be used with non contact proximity detectors.) -High voltage and voltage testers.● Battery operated.● Led indicates when power is “ON”.● Small and hand-held.● Quick connection with normal 4mm test leads. |
Proving units
|
|
|
SEW0028C-PD-20SV3 HIQH VOLTAGE PROBE (PD20S) WITH OSCILLOSCOPES
|
|
● Measures both AC and DC voltages with oscilloscopes. ● Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. ● Lightweight and rugged. ● 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode. |
High voltage probes
|
|
|
SEW3300-HS-175V2-Telescopic Hot stick
|
|
FEATURES
● Triangular-shaped design keeps the sections aligned during extension and retraction.● Push button release for stick extension and retraction. ● Telescopic design allows for easy assembly, storage and transportation.● Withstands voltage rating of 100kV from 30cm for 5 minutes. ● Universal end fitting accepts a wide variety of standard attachments.● Highly visible yellow tip section.● Easy-to-replace... |
High Voltage Testers
|
|
|
SEW0062B-HLV-3 AC VOLTAGE PROVING UNITS-230V,415V
|
|
● Designed to proof. AC voltage detectors AC voltage testers● Compact, handheld, and easy to carry and use.● Battery operated.● LED indicates when power is "ON".● Normal 4mm test leads. |
Proving units
|
|
|
SEW0039-286V3 SVD PERSONAL SAFETY VOLTAGE DETECTOR
|
|
● Compact, easy-to-wear and convenient to use.● Waterproof design, protection class : IP65.● Indoor and outdoor use.● Equipped with self-testing functions.● Sound and flashlight warning of different frequencies varied positively with sensed voltages.● Able to sense all kinds of AC high voltage system.● Low power consumption. |
Personal Safety Voltage Detector
|
|
|
SEW3310B-1.2M SHORT HOTSTICK Rated at 100 kV per 300mm (5 minutes)
|
|
● Single foamed hot stick.● Universal sunrise fitting on the head to fit special tool fittings.● Rated at 100 kV per 300mm (5 minutes).● Can be connected to 275 HP HV proximity detector, 21X HVD capacitive HV detector and 277 HP Non-contact HV detector.● Meets IEC 60855.● Reasonable price.● Accessories |
High Voltage Testers
|
|