|
DKK-TOA TA-70 / TS-70 / TP-70
|
|
Acidity / Salinity / Potentiometric TItrator TA-70 / TS-70 / TP-70
Simplified system and specified titrators series
Electrodes for trace amount titration available
Turntable connectable
Data management with external-connected printer(optional)
|
Automatic Titrator
|
|
|
DKK-TOA SU-300
|
|
Sugar Analyzer SU-300
Simple pretreatment
Simultaneous measurement of 5 kinds of sugar and ethanol, or 7 kinds of sugar alcohol
Pulse amperometric method employed
Automatic analysis and calculation without PC
Front operation and easy maintenance
|
Food-Related Analyzers
|
|
|
DKK-TOA SSM-21P
|
|
Handheld Surface Salinity Meter SSM-21P
Compliant with PSPC
Ideal for surface salinity measurements of paints used in ship coatings
Simple operation (just attach the cell to the meter and inject pure water into the cell)
Measurement range
0 - 199.9mg/m2, 0 - 1999mg/m2 0 - 199.9μS/cm, 0 - 1.999mS/cm 0 - 50℃ |
Automated Soluble Salt Meter for IMO PSPC (ISO 16145-4) Portable Surface Salinity Meter
|
|
|
DKK-TOA SSF-1600
|
|
Continuous optical measurements of SS and MLSS by using infrared scattering method
Safe and simple maintenance attainable with the small, lightweight stainless detector
Meas. range
0 - 1000/3000 mg/L 0 - 10000/20000/30000 mg/L (2-ranges or 3-ranges)
|
Suspended Solids Concentration Analyzer
|
|
|
DKK-TOA SSD-1610(For Low Concentration)/SSD-1620(For Medium Concentration)
|
|
Compact and piston automated analyzer
Types of detectors available: immersion, drop-in and pipe insertion
Long-life optical model and high reliability
RS-485 interface equipped as standard specification; compatible with Modbus communication system
Meas. range
SSD-1610: 0 - 30/500/1000 mg/L SSD-1620: 0 - 5000/10000/20000 mg/L (3-range, manual switching)
|
Suspended Solids Concentration Analyzer
|
|
|
DKK-TOA SODL-1600
|
|
Oil Film Detector (Explosion-Proof Model) SODL-1600
Robust aluminum pressure resistance explosion-proof model
Oil film is detected by measuring differences of the amount of laser reflectance of oil and water
With improvements on light source scanning and signal processing, influences occurred in broad water surfaces such as fluctuation, waviness and suspended solids have been reduced effectively
Contact-free and easy maintenance
Detectable range
0.3 - 3 m
|
Oil Film Detector
|
|
|
DKK-TOA SOD-35D (2-Wire Transmitter) SOC-71 (Sensor)
|
|
Polarograph type DO analyzer with intrinsically safe explosion-proof function (combined with a Zener Barrier)
Alterable output range
Types of detectors available: immersion, flow-through and fermentation-used (electrodes: ELD-017/ELD-019)
Meas. range
Minimum : 0 - 1 mg/L Maximum: 0 - 20 mg/L
|
Intrinsically Safe Explosion-Proof Type DO Transmitter
|
|
|
DKK-TOA SHBM-161 / 163 (2-wire)
|
|
Compact diecast aluminum enclosure
ExiallCT4 (combined with a Zener Barrier) explosion-proof and IP65 conformed enclosure
Easy calibration done with standard solution
Auto-detection of electrodes deterioration
Alterable output range
Meas. range
SHBM-161: pH; -1 - 15 SHBM-163: ORP; -2000 - +2000 mV
|
Intrinsically Safe Explosion-Proof Type Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA SCU-02
|
|
Adopts environmental friendly Freon replacement gas
Automatic temperature adjustment
Safety apparatus equipped such as overload relay and current overload breaker
Explosion-proof TIIS ExpdⅡBT4 certified
|
Explosion-Proof Type Cooler
|
|
|
DKK-TOA SCA-200
|
|
Designed for oil refinery
Batch and continuous measurement of sulfur concentration of petroleum products like light and heavy oil
Best suited for product and quality control of petroleum products
Eliminates RI regulation process and enhances safety by using the compact and X-ray tube
Meas. range
0~0.1 wt% 0~5 wt%
|
Process Sulfur Content Analyzer
|
|
|
DKK-TOA SAT-500
|
|
Salinity Analyzer SAT-500
Simple operation-just inject the sample into electrolyte in dedicated beaker
Rapid measurement-approx. 25 seconds from measurement start to data output for a standard 1% NaCl standard solution
Capable of stable measurements without effect from artificial colorings
Meas. range
0.0000 - 49.99% |
Food-Related Analyzers
|
|
|
DKK-TOA RM-30P
|
|
Handheld ORP Meter RM-30P
Dedicated model for ORP measurement
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
Meas. range
0 - ±2000 mV 0 - 100.0 degrees C |
Handheld pH/ORP Meter
|
|
|
DKK-TOA RHC-7C / RHC-7EC
|
|
Immersion Type Detector with Chemical Cleaner RHC-7C / RHC-7EC
Immersion type electrode holder combined with chemical cleaning system
By spraying mixed air&cleaning agents onto the electrode tip it dissolves fouling away
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA RC-37P
|
|
● Measures diluted sodium hypochloric acid concentration without reagent ●Polishing beads cleaning method allows for stable measurement ●Waterproof design (IP67: 1m depth, up to 30mins)
Meas. range
20 - 300mg/L 5 - 40℃
|
Handheld Hypochlorite Concentration Meter
|
|
|
DKK-TOA RC-31P
|
|
Polarographic method enables easy and reagentless measurement of residual chlorine in tap water, pool, etc. in a low running cost
Supported two measuring methods; throw-in style and water intake style
Waterproof design (IP67: 1m depth, up to 30mins)
Meas. range
0 - 2.00 mg/L 0 - 45℃
|
Handheld Residual Chlorine Meter
|
|
|
DKK-TOA PSS/ASS‐304B(KCl replenish-free) / PSS/ASS‐314B(KCl refillable)
|
|
Exchangeable Tip ORP Electrode PSS/ASS‐304B(KCl replenish-free) / PSS/ASS‐314B(KCl refillable)
asy-to-replace electrode tip and reference electrode junction tip
Platinum electrodes (PSS) and gold electrodes (ASS) available
KCl non-refillable type is ideal for wastewater treatment; KCl refillable type for processes
Selection of electrode holder: immersion type, drop-in type and flow-through type
Meas. range
ORP: -2000 - +2000 mV |
Exchangeable Tip pH Electrode
|
|
|
DKK-TOA PPA
|
|
Designed for oil refinery
Continuous measurement of pour point which is used as indication of light oil and intermediate fraction of fuel oil A
Best suited for management of plant and product control
Explosion-proof TIIS d2G4 certified
Meas. range
-30 - +20 degrees C
|
Pour Point Analyzer
|
|
|
DKK-TOA PHC-7D
|
|
Immersion Type Sensor with Pulse Air Jet Cleaner PHC-7D
Immersion type pH/ORP electrode holder combined with pulse air jet cleaner
Cleaning by high-speed water stream created by the rapid expansion of pulse-jetted compressed air in the sample water
High cleaning effect due to air bubbles present in the water stream randomly hitting the electrode
No consumables required, such as reagents, brushes
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA PAC‐R7
|
|
pH Meter with Chemical Cleaner PAC‐R7
Easy installation as equipments are previously set on the hold stand
Designed for long-term, continuous and highly reliable pH measurement in wastewater treatment facilities
Including mounting brackets
Meas. range
pH: -1 - 15 -5 - 100℃
|
pH Meter with Auto-Calibration/Chemical Cleaner
|
|
|
DKK-TOA OZ-21P
|
|
Simple, reagentless measurement of concentration of ozone stream water produced by ozone water generator
Waterproof design (IP67: 1m depth, up to 30mins)
Polishing beads cleaning method allows for stable measurement
External printer connectable
Meas. range
0 - 2.00 mg/L 5 - 40℃
|
Portable Dissolved Ozone Meter
|
|