You have 0 items in your cart.
TES-Taiwan
TES New
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
TES-1311/1312A Thermometer | Type "K" Thermocouple Input Switchable Resolution 0.1° / 1° With℃& ℉ switching Max / MIN Function Data Hold Function Room Temperature Compensated T1 & T2 dual points display T1 - T2 differential measurement Flip-up stand Backlight LCD display | Thermometer/Infrared Thermometer |
|
|
|
TES-1310/1320 Thermometer | Switchable Resolution 0.1° /1.0 ° Single/Dual Channels with Differential Measurements Data Hold Function | Thermometer/Infrared Thermometer |
|
|
|
TES-1307 Datalogging K/J Thermometer | K/J Type thermocouple input Auto ranging Dual display LCD 8000 Record Data logging Capacity Maximum / Minimum / Average reading Relative reading RS-232 interface (software include) | Thermometer/Infrared Thermometer |
|
|
|
TES-1306 Thermometer | K/J Type thermocouple input Auto ranging Maximum / Minimum reading Relative reading Multi-channels scanner (T1-->T2-->T1 - T2) | Thermometer/Infrared Thermometer |
|
|
|
TES-1304 Printing Thermometer | Type K. J. E. T. thermocouple input Dual channels with multi-functions (T1, T2 & T1-T2) Built-in thermo printer with programable time internal setting | Thermometer/Infrared Thermometer |
|
|
|
TES-1300/1303 Thermometer | Max Hold Function Data Hold Function Aux output JACKS T1-T2 differential measurement | Thermometer/Infrared Thermometer |
|
|
|
TES-1384 4 Input Thermometer / Datalogger | Isolated Input Protection of 350Vp-p between any two inputs. Highly accurate thermometer with thermocoupleK, J, E, T, R, S, N, L, U, B, C types. 4 input function T1/T2/T3/T4 temperature display. Programmable Hi – Lo alarm for 4 inputs. Display of MAX, MIN, MAX–MIN and AVG values of 4 inputs. Independent Input Setup(type of thermocouple,Hi – Lo alarm values). Memory and Read function (99 sets) 512KB auto datalogging capacity(4 input:36000 sets /1 input: 100000 sets USB... | Thermometer/Infrared Thermometer |
|
|
|
TES-3096 DC/AC KW CLAMP METER | Compact Size Trms KW measurement AC/DC Current Measurement (AC 600A/DC 600A) 600V AC & 600V DC, Ohm/Continuity Beeper 600 V AC & 600 V DC. Ohm/Continuity Beeper One Touch DCA Zero | Power Clamp Meter |
|
|
|
TES-3079K Power Clamp Meter | HVAC Application： Check current draw in motors and compressors. Use MAX/MIN/Recording in the temperature mode to assess efficiency. Test run/start capacitors. Confirm low voltage control signals. Measure flame safeguard device current draw. Confirm power sources. Analyze temperature and voltage or current data with the aid of the time stamp. Insulation test up to 100M Ω. Electrical Application： Check for energized circuits and balance loads. 1 Φ /3 Φ (3P3W/3P4W)Power... | Power Clamp Meter |
|
|
|
TES-3063/3064 Power AC/DC Clamp Meter | 1 Φ 2W, 1 Φ 3W,3 Φ 3W,3 Φ 4W RS-232 interface to talk with PC 4 digits with dual display LCD Amp / Voltage f requency measurement Dual display KW+PF , KVA+PF , V+A 4000 continuity point data logger , 25 point manual data logger True power / apparent power / power factor measurement True RMS. V , A , W , cap , lnd , phase indicator MIN / MAX measurement Peak hold detector Dual display A+Hz , V+Hz EN61010-1 600V Installation CAT III Pollution Degree 2 | Power Clamp Meter |
|
|
|
TES-1380 PH / ORP / Temperature Meter | Fast and Easy pH measurement Dual LCD display shows PH/℃& ℉ or mV/ ℃&℉ simultaneously Logging 99 readings | PH Tester |
|
|
|
TES-1381 Conductivity & pH/ORP Meter | pH, mV, Conductivity, TDS, Resistivity, Salinity, Concentration and Temperature measurement functions. 0.001pH, 0.1mV, 0.001µS/cm, 0.001mg/L and 0.1°C / °F Resolution. Programmable Temperature Coefficient for conductivity measurement. Auto / Manual Temperature Compensation for pH and conductivity measurement. Practical Salinity in the Range of 0 to 42.0, in accordance with UNESCO data measurement. Dual display with temperature Simultaneously. Easy & Fast to operate. Ideal for... | PH Tester |
|
|
|
TES-1340 Hot-Wire Anemometer | Fast Response Probe. Air Flow Volume Instant / Avg / 2/3 Vmax Flow Measurement. Velocity m/s, ft/min, knots, km/hr, mph. Data hold & Maximum / Minimum function. Manual data memory and read function (10 x 99 sets). LCD triple display. Auto power off function ON / OFF Time setting. Backlight function ON / OFF Time setting. Snake telescoping probe. | Anemometer |
|
|
|
TES-1800 LOOP / PSC Tester | TES-1800A (230V) TES-1800B (110V) Large custom high contrast display. Auto lock out if test resister overheats. Voltage indication. Measure low loop with 0.01 W resolution. High loop range permit measurement of ground spikes. Microprocessor controlled. | Loop / PSC Tester |
|
|
|
TES-1339R Data Logger Light Meter Pro. | Dual Display, 4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0.01 to 999900 Lux,0.001 to 92927 fc, Autoranging 5 step. Accurate and Instant response. Integral illuminance measurement. Luminous intensity measurement. Data Hold function. Data memory and read function. Data logger function. Reference value setting for relative or percentage deviation measurement. Ripple measurement for STRAY + LIGHT function. Time-hold function. Point... | Light Meter |
|
|
|
TES-1339 Light Meter Pro. | Dual Display, 4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0.01 to 999900 Lux,0.01 to 99990 fc, Autoranging 5 step. Accurate and Instant response. Integral illuminance measurement. Luminous intensity measurement. Data Hold function. Data memory and read function. Reference value setting for relative or percentage deviation measurement. Ripple measurement for STRAY + LIGHT function. Time-hold function. Point - average... | Light Meter |
|
|
|
TES-1336A Datalogging Light Meter (USB) | Spectrum of photo sensor meets C.I.E. photopic curve V( l ) 16000 Records Data logging capacity USB interface (software included) Measurement of luminous intensity (PC Software) | Light Meter |
|
|
|
TES-1335 Digital Light Meter | Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0 to 400,000 Lux, 0 to 40, 000 fc. Accurate and Instant response. Data Hold function. MAX/MIN function. Peak Hold function. Relative function. Cosine Angular corrected. Auto-Power-Off function. CNS 5119 class11 | Light Meter |
|
|
|
TES-1330A/1332A/1334A Light Meter | Spectral Sensitivity close to CIE photo pic Curve Cosine Angular corrected Analog output jack for recording (TES-1332A/1334A) Data Hold function, Peak Hold function for 1334 | Light Meter |
|
|
|
TES- 1370 NDIR CO 2 METER | CO 2 : 0 ~ 6,000 ppm range, Diffusion sampling mode. Three LCD Display for CO 2 , %RH Humidity and Air Temperature. Maintenance free dual wavelength NDIR infrared CO 2 sensor (non-dispersive infrared). Continuous or manual data logging (20,000 sets). Data hold & Maximum / Minimum with Time stamp. Data Memory and READ function. Alarm and Time setting. RS-232 function / Software. Backlight display function. Simple and safe to use. | CO 2 Tester |
|