|
DKK-TOA WDM-135A (2-wire) / WDM-136A (4-wire)
|
|
Industrial Conductivity Transmitter WDM-135A (2-wire) / WDM-136A (4-wire)
Easy-to-use conductivity analyzer for field installation in a compact and rigid aluminum enclosure
Wide application range from ultra-pure water to wastewater
Alterable output range
Meas. range
Minimum: 0 - 0.2 μS/cm Maximum: 0 - 20 mS/cm |
Transmitter for Industrial Conductivity Analyzer
|
|
|
testo 175 T1 (0572 1751) 1-Channel Temp Logger with Internal NTC Sensor
|
|
Features
One button operation - Click and “GO” button instantly starts logging and recording.
TWO standard interfaces - Mini USB and SD card for easiest direct communication with your PC - no added interface required.
Large display w/ one button backlight - For easily viewing data in poorly lit areas.
Longer battery life - Designed to conserve energy for data recording without interruption. Up to 3 years battery life. Standard battery (AA) replaceable by user.
Larger memory - Collect... |
Datalogger
|
|
|
Kyoritsu 3321A
|
|
AC Voltmeter with linear, easy-to-read scales.
•
Auto discharge function; any charge stored in the circuit under test will be automatically discharged after testing.
•
Designed to meet IEC/EN 61010-1 CAT.III 600V, CAT.II 1000V
•
Color-coded scales for easy reading.
•
Back light function to facilitate working at dimly illuminated locations.
•
Test lead set with remote control switch.
•
Shoulder strap for hands free.
|
Analogue Insulation Tester
|
|
|
Sew ST-375
|
|
FEATURES
● Designed for measuring AC current, AC voltage resistance and DC voltage .● Rotary scale which presents only one scale in windows at one time to avoid any possible reading errors.● Pointer lock function freezes the reading in dimly lit or hard to reach places.● Ω range ideal for checking the continuity or relays, transformers and motor coils.
... |
Rotary Scale Clamp Meters
|
|
|
Guide
|
|
|
Distance meters
|
|
|
TST0077-470 Germany-made Multifunction Tachometer
|
|
rpm measuring instrument set: Instrument with SoftCase (protective case) in transport case, incl. adapter, probe tip, surface speed disc, reflectors, batteries and calibration protocol |
From Germany
|
|
|
YOKOGAWA DL850E/DL850EV SCOPECORDER
|
|
Measure and analyze a wealth of signals in real-time and speed up development and fault finding.
The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days. Using flexible modular inputs it combines measurements of electrical signals, physical (sensors) and CAN / LIN serial buses and is able to trigger on electrical power related and other calculations in real-time.
Localized language... |
SCOPECORDERS
|
|
|
TES-1500 Capacitance Meter
|
|
0.5% Accuracy.
Overload Fuse protection.
Test Clips/Direct insert jack for easy measurement.
|
Multimeter
|
|
|
Fluke Networks NetTool Series II Inline Network Tester
|
|
NetProve diagnostics – isolate device and application connectivity issues in seconds
Inline Gigabit vision - quickly troubleshoot network problems with powerful inline vision into 10/100/Gig traffic between switches, PCs, IP phones and other devices
NetSecure monitoring and authentication - identify spyware, malware, and viruses with port monitoring; troubleshoot authentication issues with 802.1x log
VoIP troubleshooting - connect inline for visibility into VoIP calls to quickly diagnose... |
Network Analyzers and Testers
|
|
|
DKK-TOA AQM-100A
|
|
Resistivity Analyzer for Ultra-Pure Water AQM-100A
Compact DIN 96 size
Best suited for water quality control in ultra-pure water production lines
Two detectors connectable
Meas. range
0.00 - 20.00 MΩ・cm
|
Panel Type Resistivity Analyzer for Ultra-Pure Water
|
|
|
Hioki Bare Board HiTester 1231-11
|
|
Semiconductor Package Board Testing System Utilizing Index Table Method
The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards. |
Bare Board Testing
|
|
|
DKK-TOA OBM-102A
|
|
Panel type DO analyzer in a compact DIN 96 size
One-touch calibration and various self-diagnostic functions
2-point contacts signal, 4 - 20mA output (RS-232 optional)
Power supply: 90 - 264VAC, 50/60Hz
Meas. range
Minimum : 0 - 1 mg/L Maximum: 0 - 50 mg/L
|
Panel Type DO Analyzer
|
|
|
Kyoritsu 5010 (for Current) / 5020 (for Current & Voltage)
|
|
3 channel inputs for the simultaneous recording of Leakage Current, Load Current and Voltage
•
Power Quality analysis(only on KEW 5020)(Power Quality:Reference voltage, Swell, Dip, Short power Interruptions)
Large Capacity for storing 60,000 data points
60,000 data points can be recorded when 1ch is used, and when all the three channels are used, 20,000 data points per channel can be recorded
Lowpass Filter will filter out the... |
Logger
|
|
|
Hioki Leak Current Hitester ST5541
|
|
Leakage Current Testing According to IEC60990, IEC60335, and other Safety Standards
To ensure the safe use of electrical products, electrical safety tests such as insulation resistance, withstand voltage, ground resistance, and leakage current must always be conducted. Hioki Leakage Current Testers comply with laws and standards regarding medical electrical equipment as well as non-medical electrical equipment, and can be used to measure leakage current in all types of electrical products from... |
Leakage Current | Insulation | Withstand Voltage (HiPot) Testers
|
|
|
Fluke Networks TS42DLX and TS44Pro Telephone Test Sets
|
|
Superior high-impedance monitoring
Data indication/warning
Low & high voltage indication/warning
Low current (mA) indication/warning Passive monitor
2-Way hands-free speakerphone
Low battery warning
Mute indication
Polarity indication
Tone & pulse dialing
(Optional) 1-Way amplified speakerphone mode
Amplified speaker
Last number redial
Over voltage protection
Over current protection
Mute
PBX pause button
Audible ringer
Speed dialing
Volume control... |
Telephone Test Sets / Butt Sets
|
|
|
Hioki Power Hitester 3193-10
|
|
DC, 0.5 Hz To 1 MHz, 6-Channel 3-Phase 4-Wire Power Meter with Direct and Clamp Sensor Input
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3193-10 is a 6-channel power meter for testing any type of circuit ranging from single-phase lines to three-phase four-wire lines. Based on the voltage, current, and active power measurements, the power meter calculates... |
Power Meters | Power Analyzers | Clamp On Power Meters
|
|
|
DKK-TOA XAT-200 series
|
|
Process analyzer for automating analytical techniques such as atomic absorption and etc.
Suitable for automating chemical analysis processes such as distillation, heat treatment, etc.
Example applications:
*Total chromium *Total cyanide by atomic absorption/distillation *Phenols by atomic absorption/distillation *Total mercury by oxidation-reduction atomic absorption |
Automatic Process Analyzer
|
|
|
PAL series digital Refractometer
|
|
Easy to see and be used. Big digital reading. Water resistant. |
Digital refractometers
|
|
|
DKK-TOA MWB4-70
|
|
B4 size compact analyzer excellent in reliability, durability and maintainability
Enables continuously measurement of turbidity, color, residual chlorine, pH, conductivity, temperature and pressure without reagents
Equipped with interactive easy-to-use color touch panel
|
Automatic Water Quality Analyzer for City Water
|
|
|
Fluke 115/Fluke 116/Fluke 117 TRMS Digital Multimeter
|
|
Resistance, continuity, frequency, capacitance, and diode test
Measures 20 A (30 seconds momentary; 10 A continuous)
Large white LED backlight to work in poorly lit areas
Compact ergonomic design for one-handed operation
Compatible with optional magnetic hanger (ToolPak™)
True-rms for accurate measurements on non-linear loads
Min/Max/Average with elapsed time to record signal fluctuations
CAT III 600 V safety rated
|
Fluke
|
|