You have 0 items in your cart.
Welcome to Meter.com.my!
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
HIO0213-HIOKI 9780 BATTERY PACK | The Hioki 9780 NiMH Battery Pack is charges while installed in the main unit. It is designed for use with MR8870 Memory Recorders, LR8431 Data Loggers, and 8430-20 Memory HiLoggers. NiMH battery pack 3 VA, continuous operating time of approx. 2 hr. Charging time of 200 min. For use with 8870 Memory HiCorders and LR8431 Memory HiLoggers | Battery and Chargers |
|
|
|
PRO0013 - CM-05 (CM05) DC/AC CURRENT PROBE | ■ Accurate DC/AC current probe for current measurement. ■ 10mADC, 1mAAC high resolution. ■ One touch zero for DCA adjustment. ■ 23 mm diameter jaw. ■ Easy single rotary switch for any function selection. ■ Connect to an oscilloscope for waveform observation. ■ Connect to a datalogger/DMM for recording or monitoring. | Current probes (AC/DC) |
|
|
|
CEN0045A-25V2-18" FLEXIBLE CURRENT PROBE 0~3000A (WITHOUT DISPLAY UNIT) | FEATURES • Measurement Ranges: 30A/300A/3000A AC• Output Sensitivity: 100mV/10mV/1mV per Amp• 8.5mm coil diameter allows measurement in tight spaces (Double insulated)• 10”flexible sensor fit around conductors up to 3.2”in diameter• 18”flexible sensor fit around conductors up to 5.8”in diameter• Dual banana plug termination for direct input into DMM• Flashing LED low battery... | Current probes (AC/DC) |
|
|
|
CEN0039-26V2 18" FLEXIBLE CURRENT METER 3000A (SAME AS FLUKE IFLEX )-26 | FEATURES • Measurement Ranges: 30A/300A/3000A AC• Output Resolution (LCD Display): 0.01A/0.1A/1A• 8.5mm coil diameter allows measurement in tight spaces (Double insulated)• 10” flexible sensor fit around conductors up to 3.2”in diameter• 18” flexible sensor fit around conductors up to 5.8”in diameter• TRMS Reading SPECIFICATIONS Range Resolution Accuracy 30A/300A/3000A 0.01A/0.1A/1A 3%rdg ± 5dgts Frequency Range:... | Current probes (AC/DC) |
|
|
|
SEW0019-PD40AMV2 DC40KV HIGH VOLTAGE DETECTOR WITH BUILT-IN DCV INDICATOR (PD-40AM) | FEATURES Measures positive polarity DC voltages up to 40kV. Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode. Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. SPECIFICATIONS Input impedance 600 MΩ Attenuation ratio 40000 : 1 Accuracy DCV (0 ~ 20kV) ± 2%DCV (20kV ~ 40kV) ± 3% Max. working voltage DC 40kV Operating... | Current probes (AC/DC) |
|
|
|
SEW0028 DC40KV AC28V HIGH VOLTAGE PROBE (HV PROBE) DC40KV/AC28KV FOR DMM - 28 | FEATURES Measures both AC and DC voltages with digital multitester. Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode. SPECIFICATIONS Input impedance 1000 MΩ Attenuation ratio 1000 : 1 Accuracy DCV (0 ~ 20kV) ± 1%DCV (20kV ~ 40kV) ± 2%ACV (0 ~ 28kV) typically ± 5% at 50/60... | Current probes (AC/DC) |
|
|
|
SEW0028B DC30KV AC20KV HIGH VOLTAGE PROBE (HV PROBE) DC30KV/AC20KV FOR DMM - 20 | FEATURES Measures both AC and DC voltages with digital multitester. Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode. SPECIFICATIONS Input impedance 500 MΩ Attenuation ratio 1000 : 1 Accuracy DCV (0 ~ 20kV) ± 1%DCV (20kV ~ 30kV) ± 2%ACV (0 ~ 20kV) typically ± 5% at 50/60... | Current probes (AC/DC) |
|
|
|
SEW0028C DC30KV AC20KV HIGH VOLTAGE PROBE (HV PROBE) DC30KV/AC20KV FOR SCOPE/OSCILLOSCOPES- 20S | FEATURES Measures both AC and DC voltages with oscilloscopes. Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode. SPECIFICATIONS Input impedance 500 MΩ Attenuation ratio 1000 : 1 Accuracy DCV (0 ~ 20kV) ± 1%DCV (20kV ~ 30kV) ± 2%ACV (0 ~ 20kV) typically ± 5% at 50/60... | Current probes (AC/DC) |
|
|
|
KET0063-KETT KJT-270 NIR COMPOSITION ANALYZERS-JAPAN (NEAR INFRARED REFLECTANCE) | Desktop analyzer uses reflected light of near-infrared light Displays results in several seconds after applying light Measures up to four ingredients simultaneously Data logging and calibration curve creation by operating keys on the main unit Specifications Measurement method KJT-270: Near infrared Reflectance KTE-270F: Near infrared transmittance and reflectance Applications Milk powder, Wheat flour, Buckwheat powder, Rice powder, Fish powder, Feed,... | Composition Analysers |
|
|
|
KET0063B-KETT KTE-270F NIR COMPOSITION ANALYZERS-JAPAN (NEAR INFRARED TRANSMITTANCE AND REFLECTANCE) | Desktop analyzer uses reflected light of near-infrared light Displays results in several seconds after applying light Measures up to four ingredients simultaneously Data logging and calibration curve creation by operating keys on the main unit Specifications Measurement method KJT-270: Near infrared Reflectance KTE-270F: Near infrared transmittance and reflectance Applications Milk powder, Wheat flour, Buckwheat powder, Rice powder, Fish powder, Feed,... | Composition Analysers |
|
|
|
INS0095B - GW INSTEK GPR-3060D (OLD PSH-3610A) 0-30V 0-6A DIGITAL POWER SUPPLY | Features 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display The GPR-M Series is single output, 180W, linear DC power supplies, featuring all the same functions as the GPR-H Series but for lower power demands. Like the GPR-H Series, the GPR-M Series is suitable for high-end precision bench top applications. Low load and line... | Power Supply (Benchtop) |
|
|
|
INS0110-GW INSTEK GPP-1326 (LAN) - 192W SINGLE-CHANNEL PROGRAMMABLE DC POWER SUPPLY W/ LAN | 192W Single-Channel Programmable DC Power Supply with LAN Includes LAN Interface 4.3" TFT LCD Display Supports Setting Value, Measurement Value, and Output Waveform Display Load Function (CC, CV, CR Mode) Setting Resolution: 1mV/0.1mA ; Read Back Resolution: 0.1mV/0.1mA Tracking Series and Parallel Function without Additional External Wiring Utilizing Hardware to Realize Over Voltage Protection/Over Current Protection/Over Temperature Protection Delay Function/Output Monitoring... | Power Supply (Benchtop) |
|
|
|
INS0112-GW INSTEK APS-7200 PROGRAMMABLE LINEAR AC POWER SOURCES | Features 4.3-inch TFT-LCD Output capacity : APS-7050(500VA、310Vrms、4.2Arms)；APS-7100 (1000VA、310Vrms、8.4Arms)；APS-7200(2000VA、310Vrms、16.8Arms)；APS-7300 (3000VA、310Vrms、25.2Arms)；Output augmentation by options (0~600Vrms/45~999.9Hz) Low Ripple & Noise Measurement and test functions include VOLT、CURR、PWR、SVA、IPK、IPKH、FREQ、PF、CF Support a small AC current measurement 2mA ~ 35A, Min. resolution 0.01mA(APS- 7050& APS-7100) Reverse Current... | Power Supply (Benchtop) |
|
|
|
INS0046-GW INSTEK GPE-3323 (NEW GPS-3303) 3 CHANNELS, 217W LINEAR DC POWER SUPPLY | 217W 3 Channel DC Power Supply GPE-3323 3 Channels, 217W Linear DC Power Supply 3 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type... | Power Supply (Benchtop) |
|
|
|
KYO0104C-KYORITSU 6516-EV2 (6516+8602 ADAPTER) MULTI FUNCTION TESTER AND EVSE ADAPTER KIT | The Kyoritsu KEW 6516-EV2 is a multifunctional tester kit that includes the KEW 6516 Multi Function Tester and the KEW 8602 EVSE Adapter. This kit is designed to conduct a comprehensive range of tests for Electric Vehicle Supply Equipment (EVSE) under various conditions. The KEW 6516-EV2 is equipped with various technological advancements such as Anti-Trip Technology for loop testing without tripping RCDs, high-resolution loop impedance testing, and Zs/Ra Limit function for simplifying... | EV Testers |
|
|
|
MEG0244-MEGGER IMT100 - INDUSTRIAL MULTI-TESTER FOR PV SYSTEMS, EV, INDUSTRIAL APPLICATIONS | Industrial multi-function tester Versatile multi-tester for PV systems, electric vehicles and industrial applications Meets IEC62446 for PV testing, additional tests; UN EEC R100 Regulation for Electric Vehicle testing Tests continuity, open circuit, polarity, blocking diode, low resistance bonding, insulation resistance DC voltage with polarity test; AC voltage with phase rotation and frequency CAT III 600V up to 3000m; Rubber over molded housing for outer protection; Industrial case;... | EV Testers |
|
|
|
INS0108-GW INSTEK GDM-9052 DUAL MEASUREMENT MULTIMETER | Features 5 1/2 Digit Display: 239,999 Counts max. 4.3' TFT Graphic LCD DCV Basic Accuracy: 0.012 % A. I. Measurement offers automatic identification and measurement for Voltage, Resistance, Diode and Continuity tests without the need for manual selection 12 different measurement Functions: AC/DC voltage, AC/DC current, 2-wire/4-wire Resistance, Frequency, Period, Diode, Continuity, Capacitance and Temperature True RMS (AC, AC+DC) measurements Dual Measurement Function to Providing... | Benchtop multimeters |
|
|
|
CATU006B-CATU MT-1920-EP EQUIPT MALT PF 30KA IEC CATU MT-1920 Short Circuiting & Earthing Kit (30KA) | CATU MT-1920 Medium voltage mv Short Circuit & Portable Earthing Kits Part Number – CATU MT-1920 Portable Earth Kit Rating – 30kA/1s Installation On Permanent Fixed Points – Ø 25 mm CATU MT-3951 range Clamp Composition – 3 clamps CATU MT-1921-E 1 MT-1921 Earth Cable Connection Set – 3 cables 150sqmm plus 1 earth cable 50sqmm Standards – IEC 61230 CATU MT19-20 portable primary earths, commonly referred to as short-circuiting leads, are manufactured from... | Earthing Kits |
|
|
|
TIM703-TIME ELECTRONIC 1051 DECADE BOX, DECADE BOX | Time Electronics Resistance Decade Box, Resistance Resolution 0.01Ω, Absolute Maximum Resistance Measurement 1MΩ A precision resistance decade box designed for general laboratory work including platinum resistance thermometry. The 1051 is compact and durable, housed in a robust metal case with removable protective rubber cover, making it ideal for use in either the laboratory or field. Excellent accuracy is achieved by using high stability metal film resistors. The 8-digit thumbwheel... | Resistance Decade Boxes (Rbox) |
|
|
|
TIM702- TIME ELECTRONICS 1070 CAPACITANCE DECADE BOX | High accuracy and wide range makes the 1070 capacitance decade box suitable for applications in industry and education. It is both compact and robust, housed in a metal case that provides complete screening, with a protective rubber cover to guard the 1070 against everyday wear and tear. The 5-digit thumbwheel switch enables simple and precise setting of the capacitance value. Clear Visual Indication: To make selecting and reading the setting easy the 1070 incorporates colour coded digits:... | Resistance Decade Boxes (Rbox) |
|