You have 0 items in your cart.
Welcome to Meter.com.my!
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
KYO0168-KYORITSU 7122A/B (7122B) TEST LEADS FOR 3132A/3005A/3007A | Test leads CAT Ⅲ 600V (cord) CAT Ⅳ 600V / CAT Ⅲ 1000V (alligator clip) 1,220mm Plug φ4 Specification Applicable models 3005A,3007A,3131A,3132A,6010B,6011A | Battery, Chargers and Testleads |
|
|
|
MEG0249-MEGGER 1001-105 VCM100D VOLTAGE CHECK METER | Compatible with Megger AF and PB oil testers with voltages up to 100kV Simulates a dielectric test of insulating oil with ramp voltage with 10kV steps Checks voltage outputs up to 100kV in line with national standards | Battery, Chargers and Testleads |
|
|
|
KES0017B-KESTREL 0792 BIG 1.3M (FULLY EXTENDED) COLLAPSIBLE TRIPOD C/W 0793 TRIPOD CLAMP-USA | Compact Collapsible Tripod 24 to 48 inch Stands 51.4 inches high when fully extended Measures 13.6 inches when collapsed Five section twist-and-pull legs Weighs under 2 lbs Clamp that mounts a Kestrel Meter Compatible with the Kestrel Portable Vane Mount Description Kestrel 0792 - Weather Collapsible Tripod Compatible with the Portable Vane Mount and any Kestrel Meter, the Kestrel Collapsible Tripod makes for easy, hands-free measuring out in the field. Extend the... | Battery, Chargers and Testleads |
|
|
|
SEW0011A01-OPTIONAL PRO-37H + SPP-11.84 + INH-30 G 4MM BRASS BANANA PLUG EXTENSION FOR SEW0011/RCB | ***This will allow you to clip the large insulated crocodile clip onto the RCB. SEW0011A01OPTIONAL: SPECIAL 4MM BRASS BANANA PLUG EXTENSION FOR RESISTOR CALIBRATION BOX (RCB) 4mm brass banana plug extensionThis will allow you to clip the large insulated crocodile clip onto the RCB | Battery, Chargers and Testleads |
|
|
|
BAT004- BL-7PN-S20 LITHIUM BATTERY | 3.6 Volt, Lithium Battery, 750 mAH. Note: These batteries are only equipped with two leads and the leads have been cut for use with MadgeTech data loggers. | Battery, Chargers and Testleads |
|
|
|
MAD0011A-MADGETECH LTC-7PN LITHIUM BATTERY (3.6 VOLT, LITHIUM BATTERY, 750 MAH. ) | Install this battery in your compatible Madgetech data logger for a reliable power source. The battery delivers 3.6V of power and features a 750mAh capacity. | Battery, Chargers and Testleads |
|
|
|
FLU0078-FLUKE C120B (NEW C120) SOFT CARRYING CASE FOR FLUKE 120B SERIES | OFT CARRYING CASE FOR 120B SERIES Soft Carrying Case for Fluke 120B Series | Battery, Chargers and Testleads |
|
|
|
PRO0013 - CM-05 (CM05) DC/AC CURRENT PROBE | ■ Accurate DC/AC current probe for current measurement. ■ 10mADC, 1mAAC high resolution. ■ One touch zero for DCA adjustment. ■ 23 mm diameter jaw. ■ Easy single rotary switch for any function selection. ■ Connect to an oscilloscope for waveform observation. ■ Connect to a datalogger/DMM for recording or monitoring. | Current probes (AC/DC) |
|
|
|
CEN0045A-25V2-18" FLEXIBLE CURRENT PROBE 0~3000A (WITHOUT DISPLAY UNIT) | FEATURES • Measurement Ranges: 30A/300A/3000A AC• Output Sensitivity: 100mV/10mV/1mV per Amp• 8.5mm coil diameter allows measurement in tight spaces (Double insulated)• 10”flexible sensor fit around conductors up to 3.2”in diameter• 18”flexible sensor fit around conductors up to 5.8”in diameter• Dual banana plug termination for direct input into DMM• Flashing LED low battery... | Current probes (AC/DC) |
|
|
|
CEN0039-26V2 18" FLEXIBLE CURRENT METER 3000A (SAME AS FLUKE IFLEX )-26 | FEATURES • Measurement Ranges: 30A/300A/3000A AC• Output Resolution (LCD Display): 0.01A/0.1A/1A• 8.5mm coil diameter allows measurement in tight spaces (Double insulated)• 10” flexible sensor fit around conductors up to 3.2”in diameter• 18” flexible sensor fit around conductors up to 5.8”in diameter• TRMS Reading SPECIFICATIONS Range Resolution Accuracy 30A/300A/3000A 0.01A/0.1A/1A 3%rdg ± 5dgts Frequency Range:... | Current probes (AC/DC) |
|
|
|
SEW0019-PD40AMV2 DC40KV HIGH VOLTAGE DETECTOR WITH BUILT-IN DCV INDICATOR (PD-40AM) | FEATURES Measures positive polarity DC voltages up to 40kV. Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode. Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. SPECIFICATIONS Input impedance 600 MΩ Attenuation ratio 40000 : 1 Accuracy DCV (0 ~ 20kV) ± 2%DCV (20kV ~ 40kV) ± 3% Max. working voltage DC 40kV Operating... | Current probes (AC/DC) |
|
|
|
SEW0028 DC40KV AC28V HIGH VOLTAGE PROBE (HV PROBE) DC40KV/AC28KV FOR DMM - 28 | FEATURES Measures both AC and DC voltages with digital multitester. Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode. SPECIFICATIONS Input impedance 1000 MΩ Attenuation ratio 1000 : 1 Accuracy DCV (0 ~ 20kV) ± 1%DCV (20kV ~ 40kV) ± 2%ACV (0 ~ 28kV) typically ± 5% at 50/60... | Current probes (AC/DC) |
|
|
|
SEW0028B DC30KV AC20KV HIGH VOLTAGE PROBE (HV PROBE) DC30KV/AC20KV FOR DMM - 20 | FEATURES Measures both AC and DC voltages with digital multitester. Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode. SPECIFICATIONS Input impedance 500 MΩ Attenuation ratio 1000 : 1 Accuracy DCV (0 ~ 20kV) ± 1%DCV (20kV ~ 30kV) ± 2%ACV (0 ~ 20kV) typically ± 5% at 50/60... | Current probes (AC/DC) |
|
|
|
SEW0028C DC30KV AC20KV HIGH VOLTAGE PROBE (HV PROBE) DC30KV/AC20KV FOR SCOPE/OSCILLOSCOPES- 20S | FEATURES Measures both AC and DC voltages with oscilloscopes. Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode. SPECIFICATIONS Input impedance 500 MΩ Attenuation ratio 1000 : 1 Accuracy DCV (0 ~ 20kV) ± 1%DCV (20kV ~ 30kV) ± 2%ACV (0 ~ 20kV) typically ± 5% at 50/60... | Current probes (AC/DC) |
|
|
|
KET0063-KETT KJT-270 NIR COMPOSITION ANALYZERS-JAPAN (NEAR INFRARED REFLECTANCE) | Desktop analyzer uses reflected light of near-infrared light Displays results in several seconds after applying light Measures up to four ingredients simultaneously Data logging and calibration curve creation by operating keys on the main unit Specifications Measurement method KJT-270: Near infrared Reflectance KTE-270F: Near infrared transmittance and reflectance Applications Milk powder, Wheat flour, Buckwheat powder, Rice powder, Fish powder, Feed,... | Composition Analysers |
|
|
|
KET0063B-KETT KTE-270F NIR COMPOSITION ANALYZERS-JAPAN (NEAR INFRARED TRANSMITTANCE AND REFLECTANCE) | Desktop analyzer uses reflected light of near-infrared light Displays results in several seconds after applying light Measures up to four ingredients simultaneously Data logging and calibration curve creation by operating keys on the main unit Specifications Measurement method KJT-270: Near infrared Reflectance KTE-270F: Near infrared transmittance and reflectance Applications Milk powder, Wheat flour, Buckwheat powder, Rice powder, Fish powder, Feed,... | Composition Analysers |
|
|
|
INS0095B - GW INSTEK GPR-3060D (OLD PSH-3610A) 0-30V 0-6A DIGITAL POWER SUPPLY | Features 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display The GPR-M Series is single output, 180W, linear DC power supplies, featuring all the same functions as the GPR-H Series but for lower power demands. Like the GPR-H Series, the GPR-M Series is suitable for high-end precision bench top applications. Low load and line... | Power Supply (Benchtop) |
|
|
|
INS0110-GW INSTEK GPP-1326 (LAN) - 192W SINGLE-CHANNEL PROGRAMMABLE DC POWER SUPPLY W/ LAN | 192W Single-Channel Programmable DC Power Supply with LAN Includes LAN Interface 4.3" TFT LCD Display Supports Setting Value, Measurement Value, and Output Waveform Display Load Function (CC, CV, CR Mode) Setting Resolution: 1mV/0.1mA ; Read Back Resolution: 0.1mV/0.1mA Tracking Series and Parallel Function without Additional External Wiring Utilizing Hardware to Realize Over Voltage Protection/Over Current Protection/Over Temperature Protection Delay Function/Output Monitoring... | Power Supply (Benchtop) |
|
|
|
INS0112-GW INSTEK APS-7200 PROGRAMMABLE LINEAR AC POWER SOURCES | Features 4.3-inch TFT-LCD Output capacity : APS-7050(500VA、310Vrms、4.2Arms)；APS-7100 (1000VA、310Vrms、8.4Arms)；APS-7200(2000VA、310Vrms、16.8Arms)；APS-7300 (3000VA、310Vrms、25.2Arms)；Output augmentation by options (0~600Vrms/45~999.9Hz) Low Ripple & Noise Measurement and test functions include VOLT、CURR、PWR、SVA、IPK、IPKH、FREQ、PF、CF Support a small AC current measurement 2mA ~ 35A, Min. resolution 0.01mA(APS- 7050& APS-7100) Reverse Current... | Power Supply (Benchtop) |
|
|
|
INS0046-GW INSTEK GPE-3323 (NEW GPS-3303) 3 CHANNELS, 217W LINEAR DC POWER SUPPLY | 217W 3 Channel DC Power Supply GPE-3323 3 Channels, 217W Linear DC Power Supply 3 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type... | Power Supply (Benchtop) |
|