By Brands

Safety Products

Filter

Search

a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z

	Name	SKU	Description	Category
	MILLER 6' BACKBITER TIE BACK WEB LANYARD W/1 SNAP HOOK & 1 LOCKING SNAP HOOK		Miller 6' Backbiter Tie Back Web Lanyard - 913B/6FTGN The Miller BackBiter is a single-leg tie-back lanyard with an integrated SofStop shock-absorber. Not all lanyards are rated for tie-back capabilities. The BackBiter features a snap hook with 5,000 pound minimum gate load capacity that can get the job done. Tie-back lanyards allow the worker to wrap the lanyard around a suitable anchorage point and clip back to the webbing lifeline. Anchorage points are not limited by the size of the gate...	LANYARDS & ABSORBER
	MILLER LANYARDS WITH SOFSTOP SHOCK ABSORBER WITH LOCKING SNAP HOOK AND D-RING		Miller Lanyards With Sofstop Shock Absorber - 928LS/18INYL SofStop Shock Absorber pack is designed with a specially-woven inner core that smoothly expands up to 42 inches (1.1m) to reduce fall arrest forces. 18-in. length, 1 locking snap hook and 1 D-ring, yellow. Recommended Industries/Use - Construction, Manufacturing. Hazards - Confined Space, Fall from height. Regulations - Meets all applicable OSHA, ANSI and CSA standards.	LANYARDS & ABSORBER
	MILLER MANYARD II TWO-LEGGED STRETCHABLE SHOCK ABSORBING WEBBING LANYARD W/1 LOCKING SNAP HOOK & 2 LOCKING REBAR HOOKS		Miller Manyard II Two-Legged Stretchable Shock Absorbing Webbing Lanyard - 231M-Z7-6FTGNReduces Tripping Hazards -Miller Manyard™ II Stretchable Shock-Absorbing Lanyards feature webbing protected with Teflon®HT for an invisible finish providing water/oil repellency and protection against grease, dirt and grime.Lightweight - Up to 30% lighter than traditional shock-absorbing lanyards.Durable Design - Incorporates Aluminum snap hooks that are corrosion-resistant and withstand the rigors of...	LANYARDS & ABSORBER
	MILLER REBAR CHAIN ASSEMBLY WITH LOCKING REBAR HOOK, ATTACHED SWIVEL AND TWO LOCKING SNAP HOOKS		Miller Rebar Chain Assembly With Locking Rebar Hook - 6756RS-Z7 The Miller 6756RS-Z7/ is a longer rebar positioning assembly 24 in. overall when deployed. It has an intermediate swivel on the bottom of the rebar hook and twist link chain to avoid binding. Two steel self-closing, self-locking snap hooks attach to the worker's positioning D-rings. This unit also comes with a chain length adjuster for positioning fine tuning. The 6756RS-Z7/ meets OSHA 1926.502 and ANSI A10.32 fall safety...	LANYARDS & ABSORBER
	MILLER BY HONEYWELL MANYARD II LANYARD W/REBAR SNAP		Miller By Honeywell Manyard II Lanyard - 219M-6FTGNReduces Tripping Hazards- Miller Manyard™ II Stretchable Shock-Absorbing Lanyards feature webbing protected with Teflon®HT for an invisible finish providing water/oil repellency and protection against grease, dirt and grime.Lightweight - Up to 30% lighter than traditional shock-absorbing lanyards.Durable Design -Incorporates Aluminum snap hooks that are corrosion-resistant and withstand the rigors of harsh environments.FeaturesContracts...	LANYARDS & ABSORBER
	MILLER MANYARD SHOCK ABSORBING LANYARD - 6FT. YELLOW WEB W/LOCKING SNAP & REBAR HOOK		Miller Manyard Shock Absorbing Lanyard - 216WLS-6FTYLThe Manyard Shock-Absorbing lanyard features a special woven shock-absorbing inner core that reduces fall arrest forces. The heavy-duty tubular outer jacket serves as a back-up web lanyard.FeaturesSpecially-woven shock-absorbing inner core smoothly expands to reduce fall arrest forces.Unique warning flag provides visual proof that a lanyard has been involved in a fall and must be removed from service.Heavy-duty tubular outer jacket serves as...	LANYARDS & ABSORBER
	MILLER 6' ROPE LANYARD W/1 LOCKING SNAP HOOK & 1 LOCKING REBAR HOOK (2-1/2"), 5/8" POLYESTER		Miller 6' Rope Lanyard W/1 Locking Snap Hook - 202RRS-5-6FTWHMiller Positioning and Restraint Lanyards.RECOMMENDED FOR POSITIONING AND RESTRAINT ONLY - Rope, Cable and Web Lanyards recommended for “work positioning” and “restraint” only.Standard Nylon or Polyester -Rope lanyards are available in standard nylon or polyester (for greater chemical resistance) to meet user needs.Resistant - Cable lanyards are heat resistant and highly abrasion resistant.FeaturesKernmantle rope offers wear...	LANYARDS & ABSORBER
	MILLER TITAN FORKED SHOCK-ABSORBING LANYARD 2M W/SCREWGATE KARABINER AND 2 SCAF HOOK		Miller Titan Forked Shock-Absorbing Lanyard 2M W/Screwgate Karabiner And 2 Scaf Hook - 1013431Forked shock absorbing lanyard 2m with screwgate karabiner and 2 scaffold hooks 63mm.Feature & BenefitBenefit : Forked lanyard with special big hooks 63 mm. Ideal for scaffoldings.IndustryIndustry.Building and Construction.CertificationEC Category PPE : 3.Quality Assurance : ISO 9001 / 2000.EC Attestation : EC Attestation.EC Attestation Number : 0082/490/160/11/05/0360	LANYARDS & ABSORBER
	MILLER 12MM ROPE SHOCK-ABSORBING LANYARD		Miller 12Mm Rope Shock-Absorbing Lanyard - 10045912m shock absorbing lanyard equipped with a 50mm opening scaffolding type hook and a carabiner, rope 12 mm.Feature & benefitFeature : Made of a highly resistant and durable 23mm polyester webbing or 12mm Polyamid rope for increased durability. 2m rope shock absorbing lanyard equipped with 1 ML00 karabiner and 1 scaffold hook.Benefit : Adapted to harsh word conditions and difficult work environments. The lanyards offer a better comfort in case...	LANYARDS & ABSORBER
	MILLER TWO-LEGGED, 4" WEB LANYARD W/1 LOCKING SNAP HOOK & 2 (2 1/2") LOCKING REBAR HOOKS		Miller Two-Legged, 4" Web Lanyard - 231TWRS-4FTGNWith 20 years of design refinement, the "Original" Miller Manyard HP™ Shock-Absorbing Lanyards are unsurpassed in the market.High Performance Shock-Absorbing Webbing4-ft. double leg.1 locking snap hook.2 (2-1/2 in.) locking rebar hooks.	LANYARDS & ABSORBER
	MILLER ME05 FORKED WEBBING SHOCK ABSORBING LANYARD W/SCAF HOOKS 63MM & 1 SCREW KARABINER ML00		Miller Me05 Forked Webbing Shock Absorbing Lanyard W/Scaf Hooks - 10045902m forked shock absorbing webbing lanyard equipped with two 50mm opening scaffolding hooks and a karabiner.Feature & benefitFeature : Fall arrest lanyard feature a built-in shock absorber which limits the fall arrest force in a fall situation to within 6 kN. 100% Tie off.Benefit : Lightweight & versatile fall arrest lanyard designed for maximum protection.IndustryIndustry.Building and Construction.CertificationEC...	LANYARDS & ABSORBER
	MILLER ADJUSTABLE BARRACUDA SCAFFOLDING LANYARD		Miller Adjustable Barracuda Scaffolding Lanyard - 1008671 An adjustable 1.2m fall arrest rope lanyard with shock absorber, vertical scaffold clamp and screwgate karabiner.Double gripping mechanism tightens the grip on the vertical tubeas you pull down on it.The ultimate fall protection solution for scaffolders.It is the only practical fall arrest system for vertical scaffolding tubes and significantly enhances the safety of workers erecting, dismantling and altering scaffolding.Feature &...	LANYARDS & ABSORBER
	MILLER FORKED WEBBING SHOCK-ABSORBING LANYARD		Miller Forked Webbing Shock-Absorbing Lanyard - 1004590CFall arrest lanyard feature a built-in shock absorber which limits the fall arrest force in a fall situation to within 6 kN. 100% Tie off Lightweight & versatile fall arrest lanyard designed for maximum protection.	LANYARDS & ABSORBER
	MILLER ROPE GRAB FALL ARRESTER DL-40		About Honeywell Miller From harnesses to confined space systems, Miller specialises in all manner of fall protection products.	ROPE GRAB
	MILLER XENON INTERMEDIATE HANGER FOR CURVES		MILLER XENON INTERMEDIATE HANGER FOR CURVES The Honeywell Miller FPH_23510 Xenon is a 45° Intermediate Support. Xenon Permanent Overhead Horizontal Lifeline Systems are custom-engineered systems designed to be used if the application requires the lifeline to be positioned overhead beyond the user’s reach.	HORIZONTAL & VERTICAL FIXED SYSTEMS
	MILLER SOLL 8MM CABLE, SS (M)		Miller Soll 8MM Cable, SS (M) Product Family Söll Vi-Go Ladder Climbing Safety Systems provide the ultimate in safety with continuous fall protection when climbing fixed ladders: remarkably ergonomic and versatile vertical steel rope system with integrated fall protection. Söll Vi-Go is a fall protection system that can be retrofitted onto existing climbing devices such as ladders or rungs used in wind turbine, power supply, telecommunication or other industry.It is basically made up of a...	HORIZONTAL & VERTICAL FIXED SYSTEMS
	MILLER SOLL VI-GO HEAVY DUTY TENSIONER S/S		Model: Miller Soll Vi-Go Heavy Duty Tensioner S/S Material: Stainless steel Features: Integrated rung bracket and tension indicator Ideal for: Heavy-duty cable tensioning applications Available in: Stainless steel or galvanized steel	HORIZONTAL & VERTICAL FIXED SYSTEMS
	MILLER SOLL VI-GO SWAGELESS TERMINAL FOR 8 MM CABLE		The Miller Soll Vi-Go Swageless Terminal for 8mm Cable (FPH_24851) is a high-quality stainless steel terminal designed for fast and efficient cable termination. This swageless terminal allows for easy installation by simply plugging it into the wire rope ends, eliminating the need for crimping or additional tools. Model: Miller Soll Vi-Go Swageless Terminal for 8mm Cable (FPH_24851) Material: Stainless steel Cable size: Suitable for 8mm cable Easy installation: Plugs into wire rope ends Ideal...	HORIZONTAL & VERTICAL FIXED SYSTEMS
	MILLER SOLL VI-GO AUTOMATIC INTERMEDIATE HOLDER FOR 8 MM CABLE, FOR RUNGS 22 - 36MM		The Miller Soll Vi-Go Automatic Intermediate Holder for 8mm Cable (FPH_24840) is designed to securely hold 8mm cables in place on ladder rungs with profiles ranging from Ø22-36mm. Model: Miller Soll Vi-Go Automatic Intermediate Holder for 8mm Cable (FPH_24840) Material: Stainless steel Cable size: For 8mm cables Suitable for: Ladder rungs with Ø22-36mm profiles Function: Automatic cable holding bracket	HORIZONTAL & VERTICAL FIXED SYSTEMS
	MILLER SOLL RIGID END-STOP <150MM		Miller Soll Signage Plate Product Family The Söll GlideLoc® Safe Climbing system includes fall protection ladders, guide rails, and guided type fall arresters. System accessories such as entry and exit devices, roof ascent or shaft entry equipment make it possible to design a system that is not only appropriate for the structure of the building or installation, but which also satisfies the very highest safety requirements. Part No. 19876 Bottom/Top End Stop, breaking load 12kN for aluminium...	HORIZONTAL & VERTICAL FIXED SYSTEMS

Start
Prev
71
72
73
74
75
76
77
78
79
80
Next
End