You have 0 items in your cart.
By Brands
Safety Products
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
| PROTEKT U-BAR WITH TWO RINGS AND WIRE | PROTEKT U-BAR WITH TWO RINGS AND WIRE Transportable temporary anchorage device. Tripod in aluminium with either a safety chain or a safety webbing, working height from 130 to 228cm, with four anchorage points | SPARE PARTS |
|
||
|
PROTEKT HL910 FIXING SET - STAINLESS STEEL (COMPRISE OF: THREADED ROD, HEXAGON DOMED CAP NUT, HEXAGON NUT WITH PLASTIC INSERT, FLAT AND SINGLE COIL WASHERS) | PROTEKT HL910 FIXING SET - STAINLESS STEEL (COMPRISE OF: THREADED ROD, HEXAGON DOMED CAP NUT, HEXAGON NUT WITH PLASTIC INSERT, FLAT AND SINGLE COIL WASHERS) | SPARE PARTS |
|
|
|
PROTEKT LABEL - STAINLESS STEEL PLATE 85X140X0,5MM | PROTEKT LABEL - STAINLESS STEEL PLATE 85X140X0,5MM | SPARE PARTS |
|
|
|
PROTEKT LABEL - PVC PLATE 110X170X1MM | PROTEKT LABEL - PVC PLATE 110X170X1MM | SPARE PARTS |
|
|
|
PROTEKT LABEL - STAINLESS STEEL PLATE 85X140X0,5MM | PROTEKT LABEL - STAINLESS STEEL PLATE 85X140X0,5MM | SPARE PARTS |
|
|
|
PROTEKT TURN FOR POLE | PROTEKT TURN FOR POLE Bend for pole | SPARE PARTS |
|
|
|
PROTEKT 1 POINT STRUCTURAL PLATE | PROTEKT 1 POINT STRUCTURAL PLATE | SPARE PARTS |
|
|
|
PROTEKT LATERAL FOOT POST | PROTEKT LATERAL FOOT POST | SPARE PARTS |
|
|
| PROTEKT STEEL CHAIN | SPARE PARTS |
|
|||
| PROTEKT GEAR COVER | PROTEKT GEAR COVER | SPARE PARTS |
|
||
| PROTEKT LIFTING DEVICE FOR RS 300, 10M | PROTEKT LIFTING DEVICE FOR RS 300, 10M | SPARE PARTS |
|
||
| PROTEKT ROTATING JIG EXTENSION KIT FOR CR200, CR210, CR220 | PROTEKT ROTATING JIG EXTENSION KIT FOR CR200, CR210, CR220 | SPARE PARTS |
|
||
| PROTEKT FORK | PROTEKT FORK | SPARE PARTS |
|
||
| PROTEKT ROTATING JIG EXTENSION FOR CR300, CR320 | PROTEKT ROTATING JIG EXTENSION FOR CR300, CR320 | SPARE PARTS |
|
||
| PROTEKT UNIVERSAL FIXED JIG | PROTEKT UNIVERSAL FIXED JIG | SPARE PARTS |
|
||
| PROTEKT BASE OF THE ROTATING JIG | PROTEKT BASE OF THE ROTATING JIG | SPARE PARTS |
|
||
| PROTEKT SHAFT SET | SPARE PARTS |
|
|||
| PROTEKT FRICTION DISC | SPARE PARTS |
|
|||
| PROTEKT SNAP RING 15Z | SPARE PARTS |
|
|||
|
PROTEKT SNAP RING 12Z | Protekt Snap Ring - RUP-502-20 RUP 502 is a winch equipped with a clamp for mounting on tripod leg. The winch is equipped with six-strand steel cable with natural fibre kern of 20 and 25 m in length and 6.3 mm in diameter; RUP 502 is a component of rescue equipment. The device, can be lifted from a lower level onto a higher level or vice-versa. The descent distance cannot be more than 2 m. With the ratio used in the mechanism it is possible to make one turn of the drum per 5 turns of the... | SPARE PARTS |
|