By Brands

AC Clamp meters

Filter

Search

a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z

	Name	SKU	Description	Category
	HIO0004-Hioki 3282 Frequency Clamp On Hi-Tester (TRMS)		From Japan AC Current/Voltage, Frequencies, Resistance, Conduction check, Temperature (probe sold separately) Wave peak value, Waveform distortion check Auto-power off to prevent the power from being left on Non-fuse type protects up to 600 V AC 1000 A AC Ø 46 mm	Clamp meters
	CEN0039-26 18" FLEXIBLE CURRENT METER (SAME AS FLUKE IFLEX )		The new flexible current probes make your measurement possible where the space is too tight or difficult for clamp meters. Center 26 is composed of a 8.5mm, double-insulated flexible sensor and a True-RMS electronic module with back-lit LCD for accurate and clear reading in all environments. Measurement range from 1 to 3000 A ac, available in 10" and 18" length probe.	Clamp meters
	TEN005-TM-10124V3 ECONOMICAL AC CLAMP METER ACA400 ACV600		CAT III 600V 3-1/2 digit LCD with Analog Bargraph. Display Counts: 2000. Auto Ranging. Data Hold and Range Hold Auto Zero. Test Ranges: ACV, ACA, DCV, Resistance, Diode, Continuity. Maximum conductor size 30mm. Continuity test below 25 ohms, buzzer will sound. Auto Power off. Double injection outer case.	Clamp meters
	TEN008-TM-1016V3 AC-HVAC VOLT/AMP/TEMP CLAMP METER WITH TEMPERATURE		CAT III 600V 3-3/4 digit LCD Backlit Display, with Analog Bargraph. Display Counts: 4000. Auto Ranging. AC/DC current: 0.1µA to 4000µA. (using test leads). AC current: 0.01A to 400A (using jaw measurement). Ranges: ACV, ACA, DCV, DCA, Resistance, Continuity, Capacitance, and Temperature. Maximum conductor size 30mm. Continuity test below 40 ohms, buzzer will sound. Auto Power off. Double injection outer case.	Clamp meters
	SEW0063-29404CLV3 SLIM AC CLAMP METER ACV750 DCV1000 ACA1000		● Pocket size. ● 4000 counts. ● Full automatic measurement. Voltage measurement. Current measurement. Resistor measurement. ● Data hold function. ● Continuity check. ● Diode measurement. ● Select function. ● Low battery indication. ● Auto off function. ● Flashlight (Auto off in 1 minute).	Clamp meters
	CEN0031C - CL773 HIGH RESOLUTION TRMS Milli-Amp AC/DC Clamp Meter (0.1mA) (AC/DC 0.1MA , TRMS) -262		Production information FEATURES • 0.1 mA Current Resolution• True RMS Measurement For All Applications• Backlight Function• MAX MIN Measurement Function• Data Hold Function• Zero Function• Auto Power Off• Autoranging SPECIFICATIONS Function Range Resolution Accuracy DCA 300.0mA/3.000mA/10.00A 0.1mA/1mA/0.01A ± 1%rdg ± 10dgts ACA 300.0mA/3.000mA/20.00A 0.1mA/1mA/0.01A ± 1%rdg ± 5dgts DCV 50V/300V 0.01V/0.1V ±1%rdg ±...	Clamp meters
	CEN0062-KKI CL2017 AC TRUE-RMS HVAC CLAMP METER ACV/ACA/DCV/TEMP/CAP/DCUA)- 251		FEATURES • With 0.01A High Resolution• Measuring Frequency From Current Clamp & Test Terminal• Capactor/DCuA/TEMP Function• 1ms Peak Hold Function• Back Light Function• Data Hold Function• Auto Power Off•...	Clamp meters
	CEN0075-KKI CL335 AC CLAMP METER W INRUSH CURRENT FUNCTION (ACV/ACA/INRUSH)		FEATURES • With 0.01A High Resolution• Measuring Frequency From Current Clamp & Test Terminal• Inrush Function• Back Light Function• Data Hold Function• Auto Power Off•...	Clamp meters
	CEN0077-KKI CL2003 TRMS AC/DC 600V/600A VOLTAGE/CURRENT CLAMP METER (ACV/ACA/DCV/DCA) -252		FEATURES • With 0.01A High Resolution• Measuring Frequency From Current Clamp & Test Terminal• 1ms Peak Hold Function• Back Light Function• Data Hold Function• Zero Function• Auto Power Off•...	Clamp meters
	CEN0078 - KKI CL2037 TRMS 1000A AC/DC AUTORANGING CLAMP METER (ACV/ACA/DCV/DCA/DIODE/HZ)-212		EATURES • True RMS• Autoranging• Auto Power Off• High Speed Bargraph• Data Hold Function• Peak Hold...	Clamp meters
	CEN0086- NEW CL376 AC/DC TRUE RMS CLAMP METER -270 (NOT INCL. ACA3000 FLEXI CLAMP CEN0086A01)		Our new clamp meters have the thin jaw which can measure the cables in the narrow space, such as crowded combiner boxes. Waterproof rating IP54 can against dust that may harm clamp meters and against water splashed from all direction for outdoor use. An IR transmission box can transmit the datalogger from the recording memory. Key Features: IP54 Water Proof True RMS / Dual Display Auto/Manual Ranging AC+DC, Min/Max/Peak, Hold, Low Pass Filter...	Clamp meters
	CEN0086D- NEW CL376D USB AC/DC PC DATALOGGING TRMS CLAMP METER-270P(NOT INCL. ACA3000 FLEXI CLAMP CEN0086A01)		Our new clamp meters have the thin jaw which can measure the cables in the narrow space, such as crowded combiner boxes. Waterproof rating IP54 can against dust that may harm clamp meters and against water splashed from all direction for outdoor use. An IR transmission box can transmit the datalogger from the recording memory. IP54 Water Proof True RMS / Dual Display Auto/Manual Ranging AC+DC, Min/Max/Peak, Hold, Low Pass Filter...	Clamp meters
	KYO0213-KYORITSU/KEWTECH KT203 POPULAR AC/DC CLAMP METER WITH 0.01A RESOLUTION		Popular AC/DC clamp meter with 0.01A resolution. Measures Current up to 400A AC/DC Measures Voltage up to 600V AC/DC 0.01A resolution Overview This popular contractor orientated AC/DC clamp meter is strong and robust, great for everyday use. It’s 0.01A accuracy below 40A means it can measure down to 10mA! The KT203 measures DC current with a DC adjust making it ideal for Solar Installations and automotive applications. Key Benefits 0.01A accuracy below 40A means it...	Clamp meters
	YOK034-YOKOGAWA CL320 CLAMP-ON TESTER, LEAKAGE CURRENT, 200 A		DC Clamp Meter CL320 Features Leakage current measurement with current range from 20mA to 200ALight weight and compact designManual range switching and auto power-off functions24mm in diameter of measurable conductorMean value displayAuto power-offManual range switchingApproved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V) Specifications: Description Leakage Current Mini Clamp-on Method of detection Mean Value Display LCD (Digital...	Clamp meters
	KYO0019-KYORITSU 2017 CLAMP METER		Tear drop shaped jaws for ease of use in tight places and crowded cable areas.• Designed to meet internationally proven safety standards such as IEC 61010-1, UL3111 and VDE0411.• Three functions in one unit; AC current, AC voltage and resistance.• Resistance range provides audible continuity test.• Frequency response from 40Hz to 1kHz on AC current and voltage ranges. Specification AC A 200/600A ±1.5%rdg±4dgt [50/60Hz] (200A) ±1%rdg±3dgt [50/60Hz] (600A)...	Clamp meters
	KYO0195-KYORITSU 2117 (NEW MODEL:2117R) AC CLAMP METER		Fully Safety jaw Fully Safety jaw Ergonomic over-molded body gives convenient one-hand operation Large easy-to-read display with 0.01A resolution Accurate reading with True RMS 60/600/1000A auto-ranging Long battery life Safety Standard IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V Specification AC A 60.00/600.0/1000A (Auto-ranging)±1.5%rdg±4dgt [45 to 65Hz]±2.0%rdg±5dgt [40Hz to 1kHz] AC V 60.00/600.0V (Auto-ranging)±1.0%rdg±2dgt [45 to 65Hz]...	Clamp meters
	HIO0244-HIOKI CM3289 AC CLAMP METER		Clamp On Hi Tester (TRMS) New redesigned sensor for even easier clamping (CM3289) Expanded -25 °C to 65 °C operating temperature range Model CM3289: Measure even harmonic waveform components using the True RMS method Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires Hioki CM3289 New redesigned sensor for even easier clamping (CM3289) Expanded -25 °C to 65 °C operating temperature range Measure even harmonic waveform components...	Clamp meters