By Brands

HIO0219-HIOKI RM3545 RESISTANCE METER

Category: Milli-Ohm meter/Micro-Ohm meters

Resistance Meter. Wide Range 10 m to 1000 M DC Resistance Meters with Multiplexer Option for High-speed Multi-point Testing.

0.01 µΩ to 1.200 GΩ. RS-232C, RS-232C Printer, and USB Interfaces.
0.006% basic accuracy, 0.01 μΩ max. resolution, 1A max. measurable current
Measure from 0.00 μΩ (testing current 1 A) to 1200 MΩ
Multiplexer Unit Z3003 (option) provides 20-channels of 4-terminal measurements for a complete assessment of multi-point signals (RM3545-02 only)
Low-power resistance measurement with an open voltage not exceeding 20 mV
High-speed, comprehensive productivity support delivers decisions in as little as 2.2 ms from start to finish

Hioki RM3545

0.01 µΩ to 1.200 GΩ. RS-232C, RS-232C Printer, and USB Interfaces
0.006% basic accuracy, 0.01 μΩ max. resolution, 1A max. measurable current
Measure from 0.00 μΩ (testing current 1 A) to 1200 MΩ
Multiplexer Unit Z3003 (option) provides 20-channels of 4-terminal measurements for a complete assessment of multi-point signals (RM3545-02 only)

Resistance Meter

Hioki DC resistance meters measure a broad range of resistance values at a high level of precision. The RM3545 is super-high-precision, multichannel-capable resistance meters that meet applications in advanced research and production for testing winding resistance of motors and transformers; contact resistance of power relays, switches, and connectors; and resistance of signal relays and magnetic parts.

Super-high-accuracy, Multi-channel Resistance Meter

For use in Advanced Development and Production Applications

Low-power (LP) resistance measurement

The RM3545 can perform measurement at a resolution of 10 μΩ at 1 mA (using the 1,000 mΩ range). With an open-terminal voltage of 20 mV or less, the instrument is ideally suited for measuring the contact resistance of chip inductors and signal contacts.

D/A output

The RM3545 converts resistance measured values into DC voltage for output. This capability is convenient when continuously recording changes in resistance, for example as detected by a sensor, with a logger or other piece of equipment.

High/low current selection by range

Select the optimal measurement current by switching between high and low settings according to the characteristics of the sample.

Extensive contact check functionality

The RM3545 can detect erroneous measurements caused by improper contact, reducing the risk that improperly judged or unchecked parts will be shipped by mistake. Contact check functionality is also provided for 4-terminal measurement.

Temperature input (temperature sensor terminal)

Input temperature data for use in temperature correction using either the Temperature Sensor Z2001 or a DC voltage (0 to 2 V). Connect a thermometer that can generate DC voltage output, for example an infrared thermometer, to perform temperature correction.

Temperature conversion function: Useful in temperature-rise testing

Temperature increase (Δt) is obtained and displayed by converting resistance measurements and ambient temperature.

In The Box

Manuals/Guides

Manufacturer Specs

General Specifications
Resistance range	10 mΩ (12.00000 mΩ display Max., 10 nΩ resolution) to 1000 MΩ range (1200.0 MΩ display Max., 100 kΩ resolution), 12 steps [LP ON] 1000 mΩ (1200.00 mΩ display Max., 10 μΩ resolution) to 1000 Ω range (1200.00 Ω display Max., 10 mΩ resolution), 4 steps Measurement accuracy: °0.006 % rdg. °0.001 % f.s.
Testing current	1 A DC to 1 μA or less [LP ON] 1 mA to 5 μA DC
Open-terminal voltage	20 V DC (10 kΩ range or more), 5.5 V DC max. (1000 Ω range or less) [LP ON] 20 mV DC max.
Temperature measurement	-10.0 to 99.9°C, accuracy: °0.50°C (Temperature Sensor Z2001 and RM3545 combined accuracy), -99.9 to 999.9°C (analog input)
Measurement speed	FAST (2.2ms) / MED (50Hz: 21ms, 60Hz: 18ms) / SLOW1 (102ms) / SLOW2 (202ms)
Functions	Temperature correction, temperature conversion, offset voltage compensation (OVC), comparator (ABS/ REF%), BIN, key-lock (OFF, menu lock, all lock), display digit count selection function (7- digit/ 6-digit/ 5-digit), automatic power supply frequency settings (AUTO/ 50Hz/ 60Hz), scaling, judgment sound setting, auto hold, averaging, statistical calculations, panel store/panel load, D/A output.
Multiplexer	[Only RM3545-02] Support unit: Z3003 (Installed up to 2 units)
Communication interfaces	Select from GP-IB (RM3545-01 only), RS-232C, PRINTER (RS-232C), or USB . Remote function, communications monitor function, data output function, memory (50)
Power supply	100 to 240 V AC, 50/60 Hz, Rated power consumption: 40 VA
Dimensions and mass	215 mm (8.46 in) W × 80 mm (3.15 in) H × 306.5 mm (12.07 in) D [RM3545/RM3545-01] 2.5 kg (88.2 oz), [RM3545-02] 3.2 kg (112.9 oz)
Accessories	Power cord ×1, Clip type lead L2101 ×1, temperature sensor Z2001 ×1, Male EXT I/O connector ×1, Instruction manual ×1, Application disc ×1, USB cable (A-to-B type) ×1, Spare fuse ×1

Tech Specs

LCR Meters / Impedance Measurement Products /Resistance Meters Template
Max Resistance	1.2 G Ohms (1200000000 Ohms)
LCR Meters / Impedance Measurement Products /Capacitance Testers Template
Type	Benchtop
Counts	1200000 .
Test Equipment General Attributes
Product Weight	2.5 KILOS (5.51 LBS)
Product Height	9.50 IN
Product Length	16.00 IN
Product Width	12.50 IN
Shipping Weight	7 LBS
Data Logging	No
Power Supply Voltage	120V/220V Universal
Country of Origin	Japan
Shipping Height	9.50 IN
Shipping Length	16.00 IN
Shipping Width	12.50 IN

Ask about this product

Name *

Email *

Company name

Country

Phone

Subject *

Message *

Send me a copy?

Verification *

« previous

Top Menu

Client Testimonials

My Enquiry Cart

Brands

Product Categories

Contact KKI

By Brands

HIO0219-HIOKI RM3545 RESISTANCE METER

In The Box

Manuals/Guides

Manufacturer Specs

Tech Specs

LCR Meters / Impedance Measurement Products /Resistance Meters Template

LCR Meters / Impedance Measurement Products /Capacitance Testers Template

Test Equipment General Attributes

Bottom Menu