|
|
MILLER REBAR WEB ASSEMBLY WITH LOCKING REBAR HOOK AND TWO LOCKING SNAP HOOKS
|
|
Miller Rebar Web Assembly With Locking Rebar Hook - 6757WRS-Z7-35INGN
The 6757WRS-Z7/35INGN rebar web assembly from Miller by Honeywell can be used in tandem with a wide range of harnesses and safety belts. This particular unit connects easily to awkwardly shaped rebar and steel base points with a locking rebar hook with a 2 ½” gate which is connected via a 1” super tough polyester webbing to two locking snap hooks with ¾“ gates. The entire system is rated to safely hold 400lbs and the... |
HOOKS & CARABINERS
|
|
|
|
HONEYWELL ANSI Z359-2007 COMPLIANT AUTOMATIC TWIST-LOCK STEEL CARABINER, 1" GATE OPENING
|
|
Miller Honeywell Twist-Lock Steel Carabiner - 17D-1-Miller twist lock carabiners with spring loaded keepers are used as anchorage connectors. The 17D-1 has a 1” gate opening, and is plated to resist rust and corrosion.CertificationMeets or exceeds OSHA 1926.502, ANSI Z359-2007 and CSA Z259.12 requirements.ANSI Z359-2007 compliant for connectors which meet the 3,600lb gate requirements. |
HOOKS & CARABINERS
|
|
|
|
HEIGHTEC SCREWLINK PEAR, 10MM
|
|
Heightec Screwlink Pear - CSP10For rigging multiple connections in anchor lines or pulley systems.This 36kN (major axis) Pear Steel Screwlink allows several connections to be made simultaneously.It is most useful for rigging pulley systems where twin pulleys are not available and single pulleys must be attached side by side.It is essential to ensure the screw barrel is fully closed during use.Used in a range of heightec work and rescue systems. |
HOOKS & CARABINERS
|
|
|
|
HEIGHTEC ASTRA KARABINER, STEEL, OFFSET, SCREWGATE, 41KN
|
|
Heightec Astra Karabiner Steel Offset - CKS2
High strength (50kN major axis) steel karabiner with screwgate closure.
High strength 41kN offset ASTRA Steel Offset Screwgate Karabiner.
Screwgate closure with 22 mm gate clearance with a captive bar. 50kN major axis.
Good gate opening to fit over 22 mm round bar.
Plated steel for strength and corrosion resistance.
Features
50kN major axis, 15kN minor axis, 15kN major axis - gate open.
Screwgate closure.
Plated Steel.
|
HOOKS & CARABINERS
|
|
|
|
WORKSAFE® TWIST LOCK 18MM OPENING KARABINER
|
|
Detachable carabiner AZ 011T with "twist lock" gear |
HOOKS & CARABINERS
|
|
|
|
MILLER TELESCOPIC POLE, LENGTH 4.6 M
|
|
MILLER TELESCOPIC POLE - 1015430 Used to remotely attach the rescue line to the fallen climber’s harness. Carabiner is held in an opened position. Collapses to 0.8m and extends to 3.45m. |
HOOKS & CARABINERS
|
|
|
|
PROTEKT AZ011 SCREW SNAP HOOK KARABINER (WITH EN362 MARKINGS)
|
|
Protekt Screw Snap Hook Karabiner -AZ 011
Detachable carabiner AZ011 with locking gear.
Specifications
Ref. no.
AZ011
Dimensions
110 x 60 mm
Opening
18 mm
Weight
160 g
Material
galvanized steel
Static strength
25Kn
Standards
EN 362:2004
|
HOOKS & CARABINERS
|
|
|
|
WORKGARD KARABINER
|
|
WORKGARD KARABINER
Gate opening: 18mm
Weight: 168g
Tested and approved to EN362
|
HOOKS & CARABINERS
|
|
|
|
WORKSAFE® ALUMINIUM TWIST LOCK KARABINER, SILVER BLUE, 18MM GATE OPENING
|
|
WORKSAFE® Aluminium Twist Lock Karabiner – Silver Blue, 18mm Gate
The WORKSAFE® Aluminium Twist Lock Karabiner offers secure connections in safety systems with an 18mm gate opening and a lightweight design of 80g. It is made from durable aluminium and is EN362 certified for reliability in fall protection applications.
Specifications:
Material: Aluminium
Gate Opening: 18mm
Weight: 80g
Standards: Tested and approved to EN362 standards
The WORKSAFE® Aluminium... |
HOOKS & CARABINERS
|
|
|
|
WORKSAFE® DOUBLE FINGER LOCKING TYPE SNAP HOOK
|
|
Detachable carabiner AZ 122 with "twist lock" gear |
HOOKS & CARABINERS
|
|
|
|
VERTIC ANCHORAGE SYSTEMS
|
|
|
ROOF ANCHOR
|
|
|
|
MILLER PERMANENT ROOF ANCHOR FOR INSTALLATION OVER A RAFTER
|
|
Miller Permanent Roof Anchor For Installation Over a Rafter - RA45The Miller Claw is a permanent roof anchor constructed of durable stainless steel to provide fall protection for a single user, and can even be installed upside down on a rafter.PermanentThis roof anchor is designed to stay in place permanently. Just set it in place and you're covered, even when the job is done.Stainless SteelThe stainless steel construction of the Miller Claw allows it to withstand the elements and resist... |
ROOF ANCHOR
|
|
|
|
MILLER REUSABLE ROOF ANCHOR FOR INSTALLATION A ROOF OR VERTICAL WALL
|
|
Miller Reusable Roof Anchor For Installation on a Roof Or Vertical Wall - 710MFPRA41/The Miller RA41/, Single D, Permanent Roof Anchor is designed to provide fall protection on rooftops. The anchor can be applied during new construction orretrofitted into the design of finished roofs with asphalt shingles, shakes or tiles. The Single D is nailed securely across the ridge opening and the roof is finished,overtop of the Single D, with the roofing materials and ridge vent. Only the D-rings are... |
ROOF ANCHOR
|
|
|
|
MILLER ROOF ANCHORAGES FOR FLAT ROOFS/SURFACES W/SWIVEL D-RING & HARDWARE
|
|
Miller Roof Anchorages For Flat Roofs/Surfaces W/Swivel D-Ring & Hardware - RA35-1Versatile Miller temporary roof anchors offer solutions for restraint, positioning, fall arrest and lifeline applications as well as attachment options for virtually every roof style and type. Features: Flat roof anchor with fasteners Robust 1/4 inch yellow zinc plated steel |
ROOF ANCHOR
|
|
|
|
MILLER ROOF ANCHOR BRACKET W/SCREWS
|
|
Miller Roof Anchor Bracket W/Screws - RA20-1Versatile Miller temporary roof anchors offer solutions for restraint, positioning, fall arrest and lifeline applications as well as attachment options for virtually every roof style and type.Features:14 gauge steel anchor with clear chromate finish |
ROOF ANCHOR
|
|
|
|
MILLER REUSABLE ROOF ANCHOR
|
|
Miller Reusable Roof Anchor - RA15-1
Versatile Miller temporary roof anchors offer solutions for restraint, positioning, fall arrest and lifeline applications as well as attachment options for virtually every roof style and type.
Features:
14 gauge steel anchor with clear chromate finish |
ROOF ANCHOR
|
|
|
|
MILLER PERMANENT ROOF ANCHOR FOR INSTALLATION OVER A RIDGE PEAK
|
|
Miller Permanent Roof Anchor for Installation over a Ridge Peak - RA40Miller Permanent Roof Anchorages designed for residential and commercial construction. Features: The Double D permanent roof anchor is designed to provide two (2) D-ring anchorage points when securely installed on a wood roof sub-surface Stainless steel construction two plated steel D-rings Accommodates single user for fall protection Miller Permanent Roof Anchor Double D-Ring for Installation Over A Ridge Peak |
ROOF ANCHOR
|
|
|
|
MILLER REUSABLE ROOF ANCHOR W/CHAIN AND O-RING
|
|
Miller Reusable Roof Anchor with Chain & O-Ring - RA30-1Versatile Miller temporary roof anchors offer solutions for restraint, positioning, fall arrest and lifeline applications as well as attachment options for virtually every roof style and type. Features: Fully adjustable roof anchor with fasteners Installs on roof pitches from 0/12 - 1/12 |
ROOF ANCHOR
|
|
|
|
VERTIC GUARD RAIL ON STEEL DECK
|
|
VERTIC GUARD RAIL ON STEEL DECK
Compatibility : Can be installed on all steel roofing, dry orsandwich panels, installed in accordance with DTU 40.35.
Special Extension Arm :
The arm, fitted with modular mounting plates, can be installed in either direction of the roof corrugations.
In the standard version, they can be fitted with a distance between corrugations of 250 or 333 mm
Modular Installation : Can be mounted on the support perpendicular or parallel to the corrugations.... |
EDGE PROTECTION
|
|
|
|
VERTIC GUARD RAIL ON PARAPET – FOLDABLE
|
|
VERTIC GUARDRAIL ON PARAPET - foldable :
Extruded aluminium upright
Interface for isolated parapet
Side mounting plate
Vertical mounting plate
Offset mounting plate
Wall-mounting part
Aluminium plinth
Bent corner
Articulated corner coupling
Top and middle rail
|
EDGE PROTECTION
|
|