Name	Description	Category
LUT0188B-DIGITAL HANDHELD MICRO-OHM METER-2014-1 YEAR WARRANTY	FEATURES* 4 terminal devices for accurate measurement of very low resistance.* Ideal for measuring the resistance of components precisely.* Ideal for testing protective conductors, lightning conductors and welded points.* Maximum test current is 10A ( 60000uΩ range only ).* Have two working mode , Resistive and Inductive mode, Normal is resistive mode.* Good / Fail set-function for input quality control.* Built-in in buzzer sound (GOOD STATUS) to assist the Q.C. judgment.* Especial...	Milli-Ohm meter/Micro-Ohm meters
SEW0029-KKINSTRUMENTS DLRO MICRO-OHM TESTER (REPLACED MEGGER DLRO 10)	FEATURES ● Microprocessor-controlled.● Measure down to 1μΩ.● 6 ranges from 2.000mΩ to 200.0Ω.● Maximum resolution of 1μΩ.● Three test currents with over-temperature protection.● Four terminal measurement.● Protection against inadvertent connection to over- voltage. (crow bars for current and voltage)● Clear & large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave™ Inside.● EnerSave™...	Milli-Ohm meter/Micro-Ohm meters
TEN150-DIGITAL BASIC HANDHELD MILLIOHM METER	3-1/2 digit LCD display with maximum reading of 2000. Low battery indication. Zero adjustment: External zero adjustment control. Very low impedance measurement, four-wire type, one pair insulated clip. Wide measurement range 1 milliohm to 20k Ohm in six switchable steps. Fuse protection: 2 Amp/250Volt (5mm x 20mm), fast minimum interrupt ratings 1500A. Function keys: D-H switch lockup readings for LCD display. Dimensions: 160mm (L) x 100mm (W) x 52mm (D) Weight: 700g approx.	Milli-Ohm meter/Micro-Ohm meters
PRO0037-710 Micro-Ohmmeter with USB Interface	Maximum test current of 10A (60 mΩ) Best resolution of 1μΩ, (accuracy 0.05%) Measures resistive and inductive materials Selection of 6 Current ranges - Manual or Auto Programmable Hi-Lo alarm with memory of 20 readings Auto-display of: • Hi (readings higher than Hi-Limit)• Lo (readings lower than Lo-Limit)• Pass (readings between Hi-Limit and Lo-Limit) Memory of 3000 sets of data Measure cable length in metric and imperial units Cummunicate with PC via USB or...	Milli-Ohm meter/Micro-Ohm meters
LUT0188-MO-2013 HIGH PRECISION MILLIOHM METER	* Professional bench type milliohm meter.* 20 m /200 m /2 /20 /200 /2 K /20 K ohm.* 20,000 counts, Jumbo LCD with back light.* Hi / Lo warning, 4 wires terminals, Kelvin clips is included, 0.001 milliohm resolution.* Judgement output : Low/Good/High port, used for the automatic machine to select the components (good or no good).* Power : AC 110V or AC 220 V/AC230 V.	Milli-Ohm meter/Micro-Ohm meters
FLU0630-FLUKE 1738 ADVANCED POWER LOGGER COMPLETE W/ 4 X 12IN 1500A FLEXI CURRENT PROBE	Conduct energy studies and power quality logging with this advanced three-phase power logger. Automatically capture and log over 500 power quality parameters with this logger, which provides you with more visibility into the data. Additionally, this unit is Fluke Connect compatible and comes equipped with current probes. Fluke 1738 Offers More visibility, reduced uncertainty and better power quality and energy consumption decisions Compatible with the Fluke Connect® mobile app and...	Power analysers/Power meters
CAX0135-CHAUVIN ARNOUX PEL113 (REPLACE OLD PEL103) POWER AND ENERGY LOGGER - CONTRACTORS KIT	SKU: CHAUPEL113PROKIT PEL113 power and energy logger with current sensors, leads and Dataview software Measure and records all data for energy consumption diagnostics Hard carry case for equipment protection Chauvin Arnoux PEL113 Power and Energy Logger - Contractors Kit The Chauvin Arnoux PEL113 Power Energy Logger - Contractors Kit is the ideal kit needed for successful energy monitoring. Included within the kit is of course the PEL 113 Power Energy Logger and also current...	Power analysers/Power meters
FLU0755 - Fluke 1734/B - Three-Phase Electrical Energy Logger with Fluke Connect (EU/US Version) malaysia fluke distributor 1111	Fluke 1734/B - Three-Phase Electrical Energy Logger with Fluke Connect (EU/US Version) 600V CAT IV/1000V CAT III rated for use at the service entrance and downstream Power instrument directly from the measured circuit Automatically capture and log voltage, current, power, power factor, energy and associated values The new Fluke 1732 and 1734 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Discover when and where energy...	Power analysers/Power meters
LUT0163B-Benchtop Power Meter(Watt, VA, Power factor, ACV, ACA, DCV, DCA, VAr, Whr, ohms,)	0.1 W resolution ( <1000 W ), high precision and high resolution in the low watt range, good performance , for low power LED lamp watt measurement Supper large LCD, easy to read-out, display the Watt, Power factor, Voltage & Current value at the same time. Accept different kinds current input signal as direct input, inductive clamp probe or CT ( current transformer ). Auto range. Built-in peak hold & data hold function. RS-232 output interface. Power supply by...	Power analysers/Power meters
LUT0339-COMPLETE SD CARD KWH DATALOGGING 3-PHASE POWER ANALYSER/LOGGER W 3 X 1200A CLAMP - 2 YEARS WARRANTY	Features: •Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W •Voltage & Current are the True RMS value. •True Power ( KW、MW、GW ) measurement. •Apparent Power ( KVA、MVA、GVA ) measurement. •Reactive Power ( KVAR MVAR、GVAR) measurement. •Watt-Hour ( WH、SH、QH、PFH ). •Power Factor( PF )、Phase Angle( Φ ). •Voltage measurement range : 10 to 600 ACV •Current measurement range: 0.2A to 1200 ACA. •Programmable CT ratio (1 to 600) and PT ratio...	Power analysers/Power meters
LUT0298-COMPLETE ADVANCED SD CARD GRAPHICAL/ WAVEFORM DATALOGGING 3-PHASE POWER & HARMONICS ANALYSER W 3 X 1200A CLAMP	Features: •Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,3P/3W, 3P/4W •3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary •Current probe input signal/ranges with selection:Input signal (ACV):200 mV/300 mV/500 mV/1 V/2 V/3 VRanges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A. •Meter can cooperate the universal current probes •Measurement: V (phase-to-phase), V (phase-to-ground) A (phase-to-ground) KW / KVA /...	Power analysers/Power meters
PRO0030-6830 All-Rounded Power and Harmonics Three and Single Phase Analyser	PRO0030 BASE UNIT POWER AND HARMONICS ANALYZER WITH 3 x 1000A CLAMPS Optional: PRO0041- 3 x 3000A Flexible Clamps Optional: PRO0038- 3 x 100A Clamps	Power analysers/Power meters
ARH102-Smart Power Meter With Reports (WITH ETHERNET/RS-485)	Class 0.5 bi-directional energy and full power parameters measurement. Block or Rolling power demand measurement. THD, indivisual harmonics, and sag/swell power quality records. Data logging for alarm, sag, swell events with time-stamped. Report generation for daily and monthly power usage. Communication interfaces：Ethernet, RS485. Communication protocol：Modbus over TCP/IP for Ethernet, Modbus for RS485. Smart Power Meter with up to 4 channels of re-transmission...	Power analysers/Power meters
DEN810-DENT USA RECORDING POWER METER WITH WIFI AND ANTENNA	Allow you to download data without opening the switch or junction box cover. Any one can steal your power meter until you have this! >> Measures, Stores and Analyzes 144 Different Electical Parameters Including Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAR), Kilowatts (kW), Kilowatt Hours (kHW), Power Factor and Harmonics through 63rd	Power analysers/Power meters
FOT004-FOTRIC TD2 INDUSTRIAL ACOUSTIC IMAGING CAMERA-1 YEAR WARRANTY	About this item 【Advanced Acoustic Imaging Technology】Equipped with 64 high-sensitivity MEMS digital microphones and a 66°×52° field of view (FOV) for accurate sound source localization. Covers a wide frequency range from 2 to 100kHz, ideal for detecting both audible and ultrasonic leaks or mechanical anomalies. Also features a 13-megapixel digital camera for detailed visual reference. 【Quickly Locate Various Industrial Leaks & Vibration Problems】FOTRIC TD2 acoustic imaging...	Thermal imagers/thermal camera (Infrared camera)
OPG001-EYECGAS MINI UNCOOLED THERMAL CAMERA FOR OPTICAL GAS IMAGING (OGI)	Description EyeCGas® Mini is a compact, handheld and user-friendly uncooled OGI camera for gas leak detection. The Mini comes in multiple models, which, using different kind of filters, can detect Methane, SF6, Ammonia, HFC Refrigerants and more. Feature-rich, this small handheld camera allows wireless communication, data streaming, image fusion, thermography, video & audio recordings, and more. Compact and durable, the EyeCGas Mini revolutionizes the way inspections are...	Thermal imagers/thermal camera (Infrared camera)
FLI0085-FLIR C8 COMPACT 320X240 9HZ THERMAL CAMERA WITH MSX AND FLIR IGNITE ENABLED	Compact 320x240 Thermal Camera with MSX and Flir Ignite Enabled Compact 9Hz thermal camera IR resolution: 320 × 240 pixels 3.5-inch 640 x 480 color LCD touch display Camera temperature range: -20°C to 450°C (-4°F to 842°F) Accuracy: ±2°C (±5.5°F) or ±2% depending on temperature range Field of view (FOV): 35° × 27° FLIR Ignite integration provides automatic cloud uploads and advanced report templates and eliminates manual steps Meets industrial standards for drop and...	Thermal imagers/thermal camera (Infrared camera)
GUI001E02 - GUIDE SENSMART H6S THERMOGRAPHIC CAMERA STANDARD ACCESORIES (SAME ASHIKMICRO SPH120)	GUIDE H Series Enhanced -- High-Precision Hammer-Style Infrared Camera is specifically designed for industrial inspections and electrical grid maintenance. Equipped with a proprietary self-developed high-sensitivity detector (NETD <30mK, 640×480 resolution), its 50Hz high frame rate and wide temperature measurement range ensure precise capture of abnormal heating points. Equipped with a single-lens dual-FOV design, it instantly switches between wide-angle and narrow-angle views without lens...	Thermal imagers/thermal camera (Infrared camera)
UNI0007 - I8 UTI260B(I8) HANDHELD HIGH RESOLUTION (256 X 192) DIGITAL THERMAL IMAGER (MAX 550C)	This is a featured product of heavy duty series thermal cameras. It is cost effective and with a wide temperature range: -20℃~550℃. It has higher IR resolution: 256×192 pixels than other models, and includes 7 color palettes and four display modes: thermal, visual image, fusion, and picture in picture. It is also user friendly and rugged enough to pass IP65 and 2m drop test. Features : Durable and user-friendly 2.8” TFT display screen (320×240 Pixels) IR...	Thermal imagers/thermal camera (Infrared camera)
FLU0660-FLUKE TIS60+ THERMAL IMAGER 320 X 240	LK-TIS60+ 30HZ, THERMAL IMAGER; GT1; 30 HZ 30 Hz refresh rate 320 x 240 resolution for the clarity and image detail you need 3.5 inch LCD screen so you can recognize issues in the field Easy to use fixed focus, just point and shoot Measure up to 400 °C to handle all your applications One-handed image capture, review and save capability Capture smaller temperature differences from further away Automatically captures infrared and visible light image simultaneously Compatible with...	Thermal imagers/thermal camera (Infrared camera)

Start
Prev
15
16
17
18
19
20
21
22
23
24
Next
End

Top Menu

Client Testimonials

My Enquiry Cart

Brands

Product Categories

Contact KKI

By Brands

Sub Categories