Name	Description	Category
PCE003-PCE-DD-A DIGITAL DUROMETER PCE-DD-A SHORE A	Description PCE-DD-A Durometer To measure Shore A hardness in soft gums, rubber and elastomers / Easy-to-read digital display / Resolution of 0.5 degrees of hardness The PCE-DD-A Durometer is an ergonomic device that checks Shore hardness in gum, plastic and other non-metallic materials. The PCE-DD-A Durometer is used primarily for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. If the material thickness is not enough, it should be...	Hardness tester
STY400-AIRFORCE ULTRASONIC FLOW METER FLOWMETER CLAMP ON SENSOR(DN15-700MM,70c)	Velocity:0.03 ~ 105 ft/s (0.01~30 m/s), bi-directionalRate Units: Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable.Totaliser:7-digit totals for net, positive and negative flowLiquid Types:Virtually all liquidsDatalogging: Built-in data logger can store over 2,000 lines of data- Ideal for expansion - Installation without process interruption - Easy installation -...	Ultrasonic Flowmeters
STY410-AIRFORCE HIGH TEMP ULTRASONIC FLOW METER FLOWMETER CLAMP ON SENSOR(DN15-700MM,160c)	Velocity:0.03 ~ 105 ft/s (0.01~30 m/s), bi-directionalHigh Temperature (0~160c)Rate Units: Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable.Totaliser:7-digit totals for net, positive and negative flowLiquid Types:Virtually all liquidsDatalogging: Built-in data logger can store over 2,000 lines of data- Ideal for expansion - Installation without process interruption -...	Ultrasonic Flowmeters
STY404-AIRFORCE ULTRASONIC FLOW METER FLOWMETER COMPLETE SET CLAMP ON SENSOR(DN15-6000MM,160C)	This listing is for DN15-6000mm pipe size, the water temperature is from 0-160c It comes with S1H transdcuer (DN15-100mm) and NEW M1H transducer (DN50-700mm); 5m*2 signal cable;metal clamp fixture; one aluminium case; tape ruler;adaptor; data line You must use coupling agent when you measure the flow rate. If you do not use the silica gel, it will have no signal It comes with factory issued calibration certificate	Ultrasonic Flowmeters
GEN001B Series Clip-on Digital Ultrasonic Flowmeter	Accuracy: ±2.0%Pipe size range: O.D21mm~91mmOutput: 4-20mA & RS485Clamp on to measure water flow Stock Code Pipe size For PVC/Carbon Steel/Stainless Steel: GEN001B-RS485+4~20mA - GEN001B01-F3CL-DN20 Pipe OD(21-29 mm) GEN001B02-F3CL-DN25 Pipe OD (28-36 mm) GEN001B03-F3CL-DN32 Pipe OD (35-43 mm) GEN001B04-F3CL-DN40 Pipe OD (46-54 mm) GEN001B05-F3CL-DN50 Pipe OD...	Ultrasonic Flowmeters
GEN002B01-MFCL-DN10 PIPE (OD:13.5-18.5 MM) DIGITAL CLIP-ON MICRO MULTI-ULTRASONIC FLOWMETER	Easy installation, No breaking pipeline No need to adjust, Clip on to measure LCD color display screen 360° rotatable display screen PRODUCT INTRODUCTION MFCL Ultrasonic Micro Flowmeter MFCL micro flowmeter adopts the ultrasonic time measurement principle and relies on high reliability signal processing circuit to accurately measure flow through complex algorithms such as sampling, calculation and correction. The product adopts an integrated external clamping structure design, which is...	Ultrasonic Flowmeters
GEN002B SERIES DIGITAL CLIP-ON MULTI-ULTRASONIC FLOWMETER	GEN002B Series Clip-on Ultrasonic Flowmeter- All pipe materials 1 unit meter is ok for all 4 pipe materials. GFCL Aqua Systems Flow Meter Easy installation, No breaking pipeline No need to adjust, Clip on to measure LCD color display screen 360° rotatable display screen APPLICATIONS Water and wastewater management HVAC (Heating, Ventilation, and Air Conditioning) systems Process industries (chemical, pharmaceutical, food and beverage) Energy management and environmental...	Ultrasonic Flowmeters
GEN001BW WIFI Series Clip-on Digital Ultrasonic Flowmeter (Wifi)	RS485+ WIFI GEN001BW Ultrasonic Flowmeter Adopt WIFI communication to realize cloud data storageSupport online update and upgradeSupport mobile APP network configurationAll-in-one design with user-friendly interfaceInstallation require no pipe rework or damage PRODUCT INTRODUCTION: Clip on ultrasonic flowmeter GEN001BW For Household Water, Aquaculture, Farm Irrigation, Automatic Car Wash, Petroleum Chemical, Power Plant, Marine, Oil Field etc... GEN001BW adopts the measurement...	Ultrasonic Flowmeters
GENT001-GENTOS P116-CP036 ULTRASONIC FLOW METER	Main Features lAccuracy: ±1.0% lRepeatability: 0.2% lPipe Size Range: 25mm～800mm lMeasurable Flow Velocity: (0.01 ~ 5) m/s lCommunication: RS485, Support MODBUS RTU, FUJI protocol lDisplay: 2.8" TFT black and white screen 240×320, with backlight LCD display Introduction The Gentos' P116 portable ultrasonic flowmeter is a widely used time difference ultrasonic flowmeter with compact and lightweight design, making it easy to carry around.It features a recharge-able...	Ultrasonic Flowmeters
GENT001B-GENTOS P117-P011 PORTABLE ULTRASONIC FLOWMETER	Introduction The P117 Portable Ultrasonic Flowmeter allows users to conduct flow measurement checks at multiple points in a flow process without permanent installation. This universal transit-time meter boasts a dual-function push button interface, ergonomic handheld design, and a beautiful 3.5in TFT backlit digital display, greatly simplifying setup and data collection. Compared to traditional flowmeters, it offers high precision, reliability, capability, and low cost. It features TVT...	Ultrasonic Flowmeters
GENT001C-GENTOS P118I-PH020 PORTABLE ULTRASONIC FLOWMETER	Introduction The Gentos P118i(2026 Version) portable ultrasonic flowmeter is a high dynamic response device designed for compactness and lightweight portability. It comes with a rechargeable battery and universal power supply, enabling pipeline measurements anytime, anywhere. The magnetic clamp-on transducer installation is straightforward, attaching easily to metallic pipes with magnetic properties for accurate measurements. This makes it ideal for on-site flow detection of toxic, highly...	Ultrasonic Flowmeters
GF001-GF PF330 V2 ULTRASONIC FLOWMETER SET	Portable ultrasonic clamp-on flowmeter with datalogger & USB interface Portable ultrasonic clamp-on flowmeter with datalogger & USB interface Pipe Outside d d13 - d115, Accuracy ±2% of m.v. for DN100, Communication Interface 4-20 mA, Pulse, Power Supply Battery, Data Storage & Export Datalogger & USB-Port, Heatmeter -, Cable length 2	Ultrasonic Flowmeters
RIX210 - Multi-Purpose Deluxe Moisture Meter Kit 5.5 to 99.9%	This is a set of moisture sensors for measuring different type of materials.Moisture sensors includes 1 unit of pin-type sensor, 1 unit of roller-type sensor. FAQ: Is this model really can measure moisture of the paper and other materials reliably? Answer: Yes. We have tested it. Our customers have tested it. If your application consists of measuring moisture in between a stack of paper, I suggest you get the optional RIX223 sword moisture probe (sell separately) also. The...	Moisture meters
RIX240-MULTIFUNCTION PENETRATION MOISTURE METER KIT 5.5%TO 55.0%	Applications: Soil, sand, Natural compost, Sawdust, pulp, building materials, Industrial sludge and Chemical fertilizers…etc. Measurement range 5.5 ~ 55.0% Accuracy (at 25℃) ±3% (difference as the testing materials.) ( % WME) Resolution 0.1% Operating Range -10 ~ +50℃, < 90%RH (with Auto. temperature compensated) Sampling rate...	Moisture meters
RIX270-MTR-731 Moisture Transmitter with analog 4-20mA output	◇ moisture measurement and control. ◇ 4 ~ 20mA or 0 ~ 2Vdc output. ◇ IP65 Watertight enclosure, Stainless steel probe. ◇ Custom calibration for measuring object. ◇ Wide supply voltage: 12 ~ 40Vdc. ◇ Easy mounting and quick wiring. ◇ moisture measurement and control. ◇ 4 ~ 20mA or 0 ~ 2Vdc output. ◇ IP65 Watertight enclosure, Stainless steel probe. ◇ Custom calibration for measuring object. ◇ Wide supply voltage: 12 ~ 40Vdc. ◇...	Moisture meters
RIX391-HX15-W RH/TEMP TRANSMITTER FOR HIGH TEMP -40 TO 180 DEGC W/ 4-20MA OUTPUT-REMOTE 1M TEFLON CABLE	RH/Temp transmitter( -40degc~+180degc) for control/monitoring purpose. A very robust sensor(w/ transmitter) for high temperature environment. Made in USA.	Moisture meters
TST0106 and TST0264 Humidity meter(high temp to 140 degc)	Measuring air moisture at high temperature (max +140c)	Moisture meters
KETT0021 RICERTER F (REPLACED RICETER J4) RICE / WHEAT TESTER	The endurance of the Riceter f is even greater than before, and the character display has been improved to be even easier to read. In addition, this unit has acquired ISO09001 approval for international quality systems, which alone is a valuable quality guarantee. ●Specifications Riceter f series Measurement Method Electrical resistance Applications Brown rice, Polished rice, Paddy, Partially-dried paddy, Barley, Wheat, Rye Measurement Range Brown rice: 11-20%,...	Moisture meters
KET0005 PM410(4025)MULTI GRAIN MOISTURE METER(MADE IN JAPAN)	This was the first company in Japan to develop a practical Grain Moisture Tester. Since that time, this has relentlessly pursued the further development of grain moisture testers. Now, thisintroduces PM-410 as the most reliable Grain Moisture Tester in the world. Calibration was made against Oven Method which designated as an official standard(ie:ISO or USDA).Operation is very easy and moisture content can be displayed by simply pouring a grain sample into the measuring section...	Moisture meters
TST0106+TST0223-DATALOGGING DEW POINT METER FOR COMPRESSED AIR WITH PC SOFTWARE AND USB CABLE,BATTERY – Made in Germany	Measuring compressed air dew point (-60 to +50 dew pt temp)	Moisture meters

Start
Prev
23
24
25
26
27
28
29
30
31
32
Next
End

Top Menu

Client Testimonials

My Enquiry Cart

Brands

Product Categories

Contact KKI

By Brands

Sub Categories