|
|
TEN341-BASIC EMF METER - 200/2000 MG,20/200 MICROTESLA
|
|
- Display range: 20,200,2000 - Display units: micro-Tesla and mini-Gauss. - Data hold (HOLD) and Maximum (MAX) hold functions. - Low battery indication. - Overload indication. |
EMF/Radiation
|
|
|
|
TEN343-TM-190V3 MULTI-DISPLAY ELECTRIC/RF/MAGNETIC FIELD TESTER-EMF TESTER
|
|
*- 4 digits, 2.4 inches color TFT LCD.
*- 3 measurements in one meter:
*Electromagnetic Field ( 3 - axis ).
*Electric Field.
*RF Strength Field.
*- Data Hold (HOLD).
*- Language Selection (choose your language):
English; Traditional Chinese; Simplified Chinese; Japanese; Spanish. |
EMF/Radiation
|
|
|
|
CIA220-EC CF PPM DIPSTICK CONDUCTIVITY NUTRIENT METER TESTER HYDROPONICS NUTRA-WAND NUTRIENTS METER
|
|
Features:
WATERPROOF
MeasuresEC, CF and PPM scales
Highconductivity measurement for a broad rangeof crops
Factorycalibrated, never needs recalibration
Autoturn on and off
Noexternal knobs or switches
Specifications:
MeasuringRange:** 4 - 44 CF ********************0.4 - 4.4 EC ********************280-3080ppm (EC x 700) ********************200-2200ppm (EC x 500)
Resolution:******** 1 CF ********************0.1 EC ********************70ppm (700) ********************50ppm... |
Nutirents meters
|
|
|
|
TEN901-TM-903v2 MUTIMEDIA LAN CABLE/COAX/UTP/RJ45 TESTER
|
|
- Detects opens, shorts, miswires and split pairs on the twisted pair cabling. - Measures length. - Low battery detector. - Auto backlit. - Auto power off. |
Cable Testers
|
|
|
|
TEN902-LC-90 BASIC LAN CABLE TESTER
|
|
- LCD display. - Test pin configuration for 10/100 base-T cable, 10 base-2 cable, RJ45/RJ11 modular cables, AT and T 258 A cable, EIA/TIA 568A/568B cables and Token Ring Cables etc. - Verify cable continuity, opens, shorts and miss-wired. - Auto and manual scan function. - Ground wire test. - Locked status wire function. - Detected defective wire warning (buzzer). - Function Keys: ON/OFF, Test, Auto, Lock, Manual. - Low battery indication. |
Cable Testers
|
|
|
|
TES0073- 46 CAT-5 Lan Cable Tester (w/distance to fault)
|
|
Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test all category UTP cables and hardware.
Verify end-to-end connectivity per EIA/TIA 568 wiring standard.
Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair).
Locates wiring/connection errors (distance to the open or shout)
Measures cable length
|
Cable Testers
|
|
|
|
NAN004-CE-1000V2 Cable Expert w/ reporting software
|
|
Cable Expert (Model No.: CE-1000) NanoTronix Cable Expert (Model No.: CE-1000) is the all-in-one and easy-to-use network qualification unit measuring logical network performance and physical condition of network cables. It allows network engineers to install and maintain efficiently local area networks (LAN) with 10BASE-T and 100BASE-TX based on the Ethernet protocol. For measuring logical network performance, it provides the round-trip time (RTT) testing to measure network speed under dynamic... |
Cable Testers
|
|
|
|
NAN0007-NETWORK INTELLIGEN TESTER (PLUS PING TESTER)
|
|
Made in Korea |
Cable Testers
|
|
|
|
PSI001-CABLETOOL MULTIFUNCTION CABLE METER
|
|
Identify and Find the Distance to an Open or Short in Seconds
Measure Cable Length in a Box, on a Spool or in a Wall
Transmit Tone Signals for Tracing Hidden Cable Runs
Measure Voltage to Identify Live Circuits
Extensive Built-in Library of Cable Types
Compatible with All Common Cables
Displays Length in Feet or Meters
|
Cable Testers
|
|
|
|
LWA001-KKINSTRUMENTS ADVANCED NETWORK CABLE TESTER WITH ADVANCED REPORT GENERATION- MADE IN USA
|
|
The Ethernet Speed Certifier offers a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cable wiring, and ensuring that cables are able to support the speed capabilities of active equipment.
Speed Certification to IEEE standards 802.3
Cable testing to TIA568A/B
The advanced discovery gives the clearest vision of network layout and interfaces... |
Cable Testers
|
|
|
|
LWA002-KKINSTRUMENTS CABLING AND ADVANCED NETWORK TESTER-MADE IN USA
|
|
Tests 10/100/1000 Base-T, IPV4/IPV6, VLAN, DHCP and more
The model Cabling and Advanced Network Tester takes all the features and functionality of the Cable Prowler™ and adds the capability to identify, monitor, and troubleshoot LAN issues associated with physical layer and link conditions in the network.
Supports IPV4 and IPV6 protocols
Verifies DHCP connectivity and DNS
Pings IPV4, IPV6, and URL addresses
CDP, LLDP, NDP, and VLAN detection
TCP/UDP Throughput Test
Detects presence... |
Cable Testers
|
|
|
|
LWA003-KKINSTRUMENTS BASIC CABLING AND ADVANCED NETWORK TESTER-MADE IN USA
|
|
Cat 3/5e/6/6a, Coax, and Telephone Cable
The unit combines the functions of a high-end cable tester and length measurement tester, with the capability to identify link status, link capability, and PoE detection. All of this is in full color and internal memory to save results.
Displays length measurement for each pair in feet or meters using TDR technology
Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
Detects and reports current link speed... |
Cable Testers
|
|
|
|
LWA005-KKINSTRUMENTS 21ST CENTURY TOUCH-SCREEN SSTDR TESTING & MONITORING TDR/POWER CABLE MONITOR WITH ADVANCED REPORT GENERATION- MADE IN USA
|
|
The Dual Mode TDR is capable of finding faults (Opens, Shorts, Arc Faults) on fully energized cables up to 600 Volts. Arc Chaser can monitor live cables for intermittent conditions, capturing these “events” and reporting where and when they occur. Using advanced Spread Spectrum Time Domain Reflectometry (SSTDR), Arc Chaser is capable of accuracy to fault of better than 1%.
Works on both energized or unenergized cables Discover cable events which can only be shown under load
Monitors... |
Cable Testers
|
|
|
|
LWA006-KKINSTRUMENTS SSTDR 3-IN-ONE CABLE FAULT FINDER- MADE IN USA
|
|
3-In-One DMM/TDR Cable Fault Finder for Energized or Unenergized Cables |
Cable Testers
|
|
|
|
ALP201-SVM2V2 SURFACE STATIC METER-FROM USA
|
|
Manufactured in the USA
A handheld static electricity meter used to measure the magnitude and polarity of static charge on objects or surfaces. It is typically held 1” (25 mm) from the test surface. On metallic or conductive surface, the meter measures the voltage on the surface. |
Static meters(Surface)
|
|
|
|
TEN021 - STATIC FIELD METER WITH BUILT IN WARNING ALARM/DATAHOLD/BACKLIGHT - 291
|
|
Application
This contactless precise electrostatic field meter can immediately sensor the static voltage on a charged body without contact. The measuring range is 0.010kV ~ 20.000kV with the sensing distance 1 inch (2.54cm). The meter provides alarm function for prompt.
Features
Measuring range:0~+/-20.000KV
Measuring distance:2.54cm(1 inch).
Sampling time:0.5 sec.
Warning alarm setting.
Data hold.
Peak hold.
Backlight function.
Auto power off with... |
Static meters(Surface)
|
|
|
|
LUT0417 - HANDHELD USER-FRIENDLY ELECTROSTATIC.FIELD METER W/ ALARM - 1 YEAR WARRANTY
|
|
Achieve Precision and Safety with a Professional Electrostatic Field Meter
The Electrostatic Field Meter provides accurate and reliable measurements of static voltage, making it an essential tool for various industrial, environmental, and safety applications.
Exceptional Features of the ESF-106:
1. High Precision Measurement: Specially designed for measuring static voltage with 0.001 kV resolution, offering high accuracy and reliability.
2. Built-In Alarm... |
Static meters(Surface)
|
|
|
|
ALP102-GM2V2 ST DC GAUSS METER MODEL (UP TO 30K GAUSS) W/ ST UNIVERSAL PROBE
|
|
Manufactured in the USA
Laboratory gaussmeter that reads field, true peak field, AC field, and has an alarm. Range is 30,000 gauss.
ST (range: 0.1-30k G): Universal (flexible), ST Axial, ST Thin-Transverse (non-flexible) |
Gauss meters
|
|
|
|
ALP101-GM1-STV2 DIGITAL DC GAUSSMETER -MANUFACTURED IN USA
|
|
The Gaussmeter Model GM1-ST measures the field of even the strongest magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero |
Gauss meters
|
|
|
|
TEN015-Gauss Magnetic Field Meter
|
|
Product Description
Can measure DC and AC(40-500Hz) magnetic field. 2. DC N/S polarity of magnetic field display. 3. After machine component are processed, remain the magnetism to measurement. 4. Magnetic application products, the intensity of magnetic field measurement. 5. After processing the stress with stainless steel material, remain the measurement of the magnetism 6. Magnetic force measurement of the magnetisable material. 7. Various steel products brought magnetic measurement... |
Gauss meters
|
|