Name	Description	Category
PRO0037B-ADVANCED DIGITAL MICRO OHM METER (MAX:10A DC)-SAME AS CA6255	l Resistance Measurement (4-wire). l 10A (2mΩ, 20 mΩ) maximum test current. l Best resolution 0.1μΩ. l Basic accuracy 0.1%. l Can work with many kinds of testing leads: Kelvin clip test leads, Double prod test leads, Alligator clip test leads. l Warning function with Buzzer alarm. l HI-LO LIMITS test function, judgment display PASS or FAIL. l Reading HOLD function. l Zero-adjustment function. l Measurement mode...	Milli-Ohm meter/Micro-Ohm meters
CAX0050 - CHAUVIN ARNOUX CA6255 (REPLACED OLD CA6250) MICROHMMETER	Description An easy-to-use, high-performance instrument, the C.A 6255 micro-ohmmeter tests the quality of connections with precision (resolution of 0.1 µΩ) through the use of low resistance measurements. 4-wire measurement method, 1 µΩ to 2,500 Ω (7 ranges, 3 with a 10 A current)automatic compensation of stray voltages at input terminals3 measurement modes available depending on the application: inductive, non-inductive and non-inductive with automatic triggertemperature...	Milli-Ohm meter/Micro-Ohm meters
MGA003-MEGABRAS 204E DIGITAL PORTABLE MICROOHM METER (FOR 200A)	200 A Digital micro-ohmmeter Alphanumerical display Resolution: 0.1 µΩ Resistance reading: up to 200 Ω Up to 200 A test current Kelvin-type (4-wires) measurement Powered by internal battery (up to 10 A) or mains supply Direct reading (Up to 4½ digits) Overheating Protection USB interface The MPK204e high current micro-ohmmeter is a portable, microprocessor-controlled instrument, used to accurately measure very low contact resistances of breakers and switches, busbars,...	Milli-Ohm meter/Micro-Ohm meters
MGA002-MEGABRAS MPK-102E MICROOHM METER - CURRENT: 100 A	100 A Digital micro-ohmmeter Alphanumerical display Resolution: 0.1 µΩ Resistance reading: up to 200 Ω Up to 100 A test current Kelvin-type (4-wires) measurement Powered by internal battery (up to 10 A) or mains supply Direct reading (Up to 4½ digits) Overheating Protection The MPK102e high current micro-ohmmeter is a portable, microprocessor-controlled instrument, used to accurately measure very low contact resistances of breakers and switches, busbars, transformers...	Milli-Ohm meter/Micro-Ohm meters
HUAZ001 - CONTACT RESISTANCE TESTER/ 50A 100A MICROOHM METER COMPLETE WITH STD ACCESORIES circuit breaker contact resistance tester 100A digital contact loop resistance tester circuit breaker loop resistance tester	Circuit breaker contact resistance tester I.Introduction Contact resistance instrument is a carefully developed high precision, digital switch detection instrument by the IEC standard And PRC's Latest electric power execution standard DL/T845.4-2004 Regulations. The Instrument adopt High frequency high power constant current switching power supply technology to detect the Micro ohm contact resistance. The Instrument is widely used for varieties of the switches and Contact resistance of...	Milli-Ohm meter/Micro-Ohm meters
HIO0219-HIOKI RM3545 RESISTANCE METER	Resistance Meter. Wide Range 10 m to 1000 M DC Resistance Meters with Multiplexer Option for High-speed Multi-point Testing. 0.01 µΩ to 1.200 GΩ. RS-232C, RS-232C Printer, and USB Interfaces. 0.006% basic accuracy, 0.01 μΩ max. resolution, 1A max. measurable current Measure from 0.00 μΩ (testing current 1 A) to 1200 MΩ Multiplexer Unit Z3003 (option) provides 20-channels of 4-terminal measurements for a complete assessment of multi-point signals (RM3545-02 only) Low-power...	Milli-Ohm meter/Micro-Ohm meters
MEGGER DLRO10HD and DLRO10HDX digital low resistance ohmmeters	DLRO10HD and DLRO10HDX digital low resistance ohmmeters Low resistance measurements for the laboratory, the workshop, or the field The DLRO10HD and DLRO10HDX deliver a test current up to 10 A to measure resistance up to 250 mΩ, and 1 A for measurements up to 2.5 Ω About the product The heavy duty DLRO10HD and DLRO10HDX digital low resistance ohmmeters can deliver a 10 A current into circuits up to 250 mΩ and 1 A into circuits up to 2.5 Ω. The...	Milli-Ohm meter/Micro-Ohm meters
MEG0059-MEGGER DLRO600 MICROHMMETER-6411015,MEGGER	About the product Small and weighs less than 33 lbs (15 kg) Test currents from 10 A to 600 A DC 0.1 µΩ best resolution On-board memory for up to 300 test results and notes RS232 port to download stored results or for real time output to a printer Supplied complete with 16.4 ft (5 m) test leads and download software The Megger DLRO600 is a 600 A micro-ohmeter that measures resistances between 0.1 μΩ and 1 Ω at high currents. This versatile instrument can provide test...	Milli-Ohm meter/Micro-Ohm meters
MEG0081-MEGGER DLRO10HD (NEW BT51) DLRO10-HD DIGITAL LOW RESISTANCE OHMMETER-0.1MICROOHM-1006 -604	Megger DLRO10HD Resistance testing from 0.00010 m Ohms up to a maximum of 2500.0 Ohms Mode and range selections via rotary switches Rechargeable battery with an option to use line power LED-backlit 5-digit main display, with two secondary displays Safety Rated to IEC61010-1, IEC61326-1, and CATIII 300 V when used with optional terminal cover Digital Low Resistance Ohmmeter, 10 Amp The DLRO10HD is a powerful digital low-resistance ohmmeter from Megger. The...	Milli-Ohm meter/Micro-Ohm meters
DEN810-DENT USA RECORDING POWER METER WITH WIFI AND ANTENNA	Allow you to download data without opening the switch or junction box cover. Any one can steal your power meter until you have this! >> Measures, Stores and Analyzes 144 Different Electical Parameters Including Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAR), Kilowatts (kW), Kilowatt Hours (kHW), Power Factor and Harmonics through 63rd	Power analysers/Power meters
ARH102-Smart Power Meter With Reports (WITH ETHERNET/RS-485)	Class 0.5 bi-directional energy and full power parameters measurement. Block or Rolling power demand measurement. THD, indivisual harmonics, and sag/swell power quality records. Data logging for alarm, sag, swell events with time-stamped. Report generation for daily and monthly power usage. Communication interfaces：Ethernet, RS485. Communication protocol：Modbus over TCP/IP for Ethernet, Modbus for RS485. Smart Power Meter with up to 4 channels of re-transmission...	Power analysers/Power meters
PRO0030-6830 All-Rounded Power and Harmonics Three and Single Phase Analyser	PRO0030 BASE UNIT POWER AND HARMONICS ANALYZER WITH 3 x 1000A CLAMPS Optional: PRO0041- 3 x 3000A Flexible Clamps Optional: PRO0038- 3 x 100A Clamps	Power analysers/Power meters
LUT0298-COMPLETE ADVANCED SD CARD GRAPHICAL/ WAVEFORM DATALOGGING 3-PHASE POWER & HARMONICS ANALYSER W 3 X 1200A CLAMP	Features: •Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,3P/3W, 3P/4W •3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary •Current probe input signal/ranges with selection:Input signal (ACV):200 mV/300 mV/500 mV/1 V/2 V/3 VRanges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A. •Meter can cooperate the universal current probes •Measurement: V (phase-to-phase), V (phase-to-ground) A (phase-to-ground) KW / KVA /...	Power analysers/Power meters
LUT0339-COMPLETE SD CARD KWH DATALOGGING 3-PHASE POWER ANALYSER/LOGGER W 3 X 1200A CLAMP - 2 YEARS WARRANTY	Features: •Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W •Voltage & Current are the True RMS value. •True Power ( KW、MW、GW ) measurement. •Apparent Power ( KVA、MVA、GVA ) measurement. •Reactive Power ( KVAR MVAR、GVAR) measurement. •Watt-Hour ( WH、SH、QH、PFH ). •Power Factor( PF )、Phase Angle( Φ ). •Voltage measurement range : 10 to 600 ACV •Current measurement range: 0.2A to 1200 ACA. •Programmable CT ratio (1 to 600) and PT ratio...	Power analysers/Power meters
LUT0163B-Benchtop Power Meter(Watt, VA, Power factor, ACV, ACA, DCV, DCA, VAr, Whr, ohms,)	0.1 W resolution ( <1000 W ), high precision and high resolution in the low watt range, good performance , for low power LED lamp watt measurement Supper large LCD, easy to read-out, display the Watt, Power factor, Voltage & Current value at the same time. Accept different kinds current input signal as direct input, inductive clamp probe or CT ( current transformer ). Auto range. Built-in peak hold & data hold function. RS-232 output interface. Power supply by...	Power analysers/Power meters
FLU0755 - Fluke 1734/B - Three-Phase Electrical Energy Logger with Fluke Connect (EU/US Version) malaysia fluke distributor 1111	Fluke 1734/B - Three-Phase Electrical Energy Logger with Fluke Connect (EU/US Version) 600V CAT IV/1000V CAT III rated for use at the service entrance and downstream Power instrument directly from the measured circuit Automatically capture and log voltage, current, power, power factor, energy and associated values The new Fluke 1732 and 1734 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Discover when and where energy...	Power analysers/Power meters
CAX0135-CHAUVIN ARNOUX PEL113 (REPLACE OLD PEL103) POWER AND ENERGY LOGGER - CONTRACTORS KIT	SKU: CHAUPEL113PROKIT PEL113 power and energy logger with current sensors, leads and Dataview software Measure and records all data for energy consumption diagnostics Hard carry case for equipment protection Chauvin Arnoux PEL113 Power and Energy Logger - Contractors Kit The Chauvin Arnoux PEL113 Power Energy Logger - Contractors Kit is the ideal kit needed for successful energy monitoring. Included within the kit is of course the PEL 113 Power Energy Logger and also current...	Power analysers/Power meters
FLU0630-FLUKE 1738 ADVANCED POWER LOGGER COMPLETE W/ 4 X 12IN 1500A FLEXI CURRENT PROBE	Conduct energy studies and power quality logging with this advanced three-phase power logger. Automatically capture and log over 500 power quality parameters with this logger, which provides you with more visibility into the data. Additionally, this unit is Fluke Connect compatible and comes equipped with current probes. Fluke 1738 Offers More visibility, reduced uncertainty and better power quality and energy consumption decisions Compatible with the Fluke Connect® mobile app and...	Power analysers/Power meters
JAN002-JANITZA UMG 604-PRO 230V POWER QUALITY ANALYZER	Power analyzer UMG 604-PRO Functionally expandable power analyzer The UMG 604-PRO power analyzer is far more than just a multi-functional measurement device. Furthermore, it is also suitable as a transient recorder, meter (kWh, kvarh), for optimizing load peaks, analyzing harmonics, PLC, monitoring the state, logging results and collecting data. It has two digital inputs and outputs as well as a temperature measurement input. The UMG 604-PRO is more than just...	Power analysers/Power meters
JAN001-JANITZA 96RM-CBM MULTIFUNCTIONAL POWER ANALYZER (WITH 256MB)	Energy analyzer UMG 96RM-CBM Multi-functional energy analyzer with Modbus The UMG 96RM-CBM multifunctional meter has a feature for time recording, can be run on a battery and also has a measurement data memory. The UMG 96RM multifunctional meter is primarily designed for use in low-voltage and medium-voltage distribution systems. The device measures harmonics currents up to the 40th harmonic and has rotating field components. The device has up to four digital inputs and six digital...	Power analysers/Power meters

Start
Prev
16
17
18
19
20
21
22
23
24
25
Next
End

Top Menu

Client Testimonials

My Enquiry Cart

Brands

Product Categories

Contact KKI

By Brands

Sub Categories